FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/gdd_dio/gdd_dio_data.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: gdd_dio_data.h +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Internal data structures for entity gdd_dio (DIO BAT Adapter) +----------------------------------------------------------------------------- */ #ifndef GDD_DIO_DATA_H #define GDD_DIO_DATA_H /*==== INCLUDES =============================================================*/ /* DIO stuff */ #include "dio.h" /* for T_DIO_CAP_PKT */ /* We must define P_DIO_H, in order to avoid inclusion of p_dio.h. This is necessary due to the special fact, that "dio.h", which is included in the header "dio_io/dio_drv.h", mirrors the header "p_dio.h". */ #define P_DIO_H #include "gdd.h" #include "gdd_dio_queue.h" /* for T_GDD_BUF_QUEUE */ /*==== DEFINITIONS ==========================================================*/ #define GDD_CON_HANDLE_USER_MASK 0xFF000000 /*==== CONSTS ===============================================================*/ /*==== TYPES =================================================================*/ /** * States of kernel service */ typedef enum { GDD_DIO_KER_DEAD = 0, GDD_DIO_KER_INIT, GDD_DIO_KER_READY } T_GDD_DIO_KER_STATE; /** * Kernel service data */ typedef struct { T_GDD_DIO_KER_STATE state; } T_GDD_DIO_KER_DATA; /** * States of a single connection */ typedef enum { GDD_DIO_CON_DEAD = 1, GDD_DIO_CON_CONNECT, GDD_DIO_CON_READY, GDD_DIO_CON_SENDING, GDD_DIO_CON_CLOSE } T_GDD_DIO_CON_STATE; /** * Connection data */ typedef struct { T_GDD_BUF_QUEUE rx_queue; /* RX buffer queue */ T_GDD_BUF_QUEUE tx_queue; /* TX buffer queue */ UBYTE con_state; /* Connection state */ UBYTE wait_send_buf; /* Flag indicating that we wait for a send buffer */ U32 dio_device; /* Dio device type */ T_GDD_RECEIVE_DATA_CB rcv_cb; /* Receive callback of the client */ T_GDD_SIGNAL_CB sig_cb; /* Signale callback of the client */ T_DIO_CAP_PKT dio_cap; /* DIO capabilities */ } T_GDD_DIO_CON_DATA; /** * DIO driver number */ typedef U32 T_GDD_DIO_DRV_NUM; /*==== EXPORTS ===============================================================*/ int inst_num_from_dev_id(U32 device); #endif /* !GDD_DIO_DATA_H */