FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/gdd_dio/gdd_dio_pei.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: gdd_dio_pei.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module implements the PEI interface | for the entity gdd_dio. +----------------------------------------------------------------------------- */ #define GDD_DIO_PEI_C #define ENTITY_GDD_DIO /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get standard types */ #include "vsi.h" /* to get a lot of macros */ #include "gsm.h" /* to get a lot of macros */ #include "custom.h" /* to get GDD_DIO_NAME */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "pei.h" /* to get PEI interface */ #include "tools.h" /* to get common tools */ #include "mon_gdd_dio.h" /* to get mon-definitions */ #include "gdd_dio.h" /* to get the global entity definitions */ #include "string.h" /* for strncmp */ #include "gdd_dio_kerf.h" #include "gdd_dio_rxf.h" /* Needed for gdd_dio_rx_sig_send_data() */ #include "gdd_dio_drxf.h" /* Needed for gdd_dio_drx_sig_receive_data */ /*==== CONSTS ================================================================*/ /* * Wait as long as possible. This is the time in ms that is waited for a * message in the input queue in the active variant. * It can be decreased by the customer. */ #define GDD_DIO_TIMEOUT 0xffffffff /*==== TYPES =================================================================*/ /* Entry point for testing BAT via the BAT adapter (this entity) */ GLOBAL void gdd_dio_test_bat(const char * in_string); /*==== LOCALS ================================================================*/ static T_MONITOR gdd_dio_mon; /* * Function is needed for grr_table[]. This declaration can be removed * as soon as this function is no more called (i.e. all primitives are * handled). */ static void primitive_not_supported (void *data); #ifdef _SIMULATION_ /* Function to activate/de-activate the PSI STUB for simulation */ void dio_il_sim_activate_psi_stub(BOOL b); void dio_il_psi_stub_activate_batlib_test(BOOL b); #endif /* _SIMULATION */ /*==== PRIVATE FUNCTIONS ====================================================*/ /* +------------------------------------------------------------------------------ | Function : primitive_not_supported +------------------------------------------------------------------------------ | Description : This function handles unsupported primitives. | | Parameters : data - not used | | Return : void +------------------------------------------------------------------------------ */ static void primitive_not_supported (void *data) { TRACE_FUNCTION ("[GDD] primitive_not_supported()"); PFREE (data); } /* +------------------------------------------------------------------------------ | Function : pei_primitive +------------------------------------------------------------------------------ | Description : Process protocol specific primitive. | | Parameters : prim - pointer to the received primitive | | Return : PEI_OK - function succeeded | PEI_ERROR - function failed +------------------------------------------------------------------------------ */ static short pei_primitive (void * ptr) { T_PRIM *prim = (T_PRIM*)ptr; TRACE_FUNCTION ("[GDD] pei_primitive()"); if (prim NEQ NULL) { unsigned long opc = prim->custom.opc; unsigned short n; const T_FUNC *table; /* * This must be called for Partition Pool supervision. Will be replaced * by another macro some time. */ VSI_PPM_REC (&prim->custom, __FILE__, __LINE__); PTRACE_IN (opc); switch (opc & OPC_MASK) { default: table = NULL; n = 0; break; } if (table != NULL) { if ((opc & PRM_MASK) < n) { table += opc & PRM_MASK; #ifdef PALLOC_TRANSITION P_SDU(prim) = table->soff ? (T_sdu*) (((char*)&prim->data) + table->soff) : 0; #ifndef NO_COPY_ROUTING P_LEN(prim) = table->size + sizeof (T_PRIM_HEADER); #endif /* #ifndef NO_COPY_ROUTING */ #endif /* #ifdef PALLOC_TRANSITION */ JUMP (table->func) (P2D(prim)); } else { primitive_not_supported (P2D(prim)); } return PEI_OK; } /* * primitive is not a GSM primitive - forward it to the environment */ if (opc & SYS_MASK) vsi_c_primitive (VSI_CALLER prim); else { PFREE (P2D(prim)); return PEI_ERROR; } } return PEI_OK; } /* +------------------------------------------------------------------------------ | Function : pei_init +------------------------------------------------------------------------------ | Description : Initialize Protocol Stack Entity | | Parameters : handle - task handle | | Return : PEI_OK - entity initialised | PEI_ERROR - entity not (yet) initialised +------------------------------------------------------------------------------ */ static short pei_init (T_HANDLE handle) { TRACE_FUNCTION ("[GDD] pei_init()"); /* Initialize task handle */ GDD_DIO_handle = handle; /* * Open communication channels */ if (hCommGDD_DIO < VSI_OK) { if ((hCommGDD_DIO = vsi_c_open (VSI_CALLER GDD_DIO_NAME)) < VSI_OK) return PEI_ERROR; } /* * Initialize entity data (call init function of every service) */ gdd_dio_ker_init(); return (PEI_OK); } /* +------------------------------------------------------------------------------ | Function : pei_timeout +------------------------------------------------------------------------------ | Description : Process timeout. | | Parameters : index - timer index | | Return : PEI_OK - timeout processed | PEI_ERROR - timeout not processed +------------------------------------------------------------------------------ */ static short pei_timeout (unsigned short index) { TRACE_FUNCTION ("[GDD] pei_timeout()"); /* Process timeout */ switch (index) { case 0: /* Call of timeout routine */ break; default: TRACE_ERROR("[GDD] Unknown Timeout()"); return PEI_ERROR; } return PEI_OK; } /* +------------------------------------------------------------------------------ | Function : pei_signal +------------------------------------------------------------------------------ | Description : Process signal. | | Parameters : opc - signal operation code | data - pointer to primitive | | Return : PEI_OK - signal processed | PEI_ERROR - signal not processed +------------------------------------------------------------------------------ */ static short pei_signal (unsigned long opc, void* data) { #ifdef GDD_MAKE_DTX_CONTEXT_SWITCH U32 con_handle = opc & GDD_DIO_SIGNAL_CON_HANDLE_MASK; #else /* GDD_MAKE_DTX_CONTEXT_SWITCH */ U32 con_handle = opc; #endif /* GDD_MAKE_DTX_CONTEXT_SWITCH */ TRACE_FUNCTION ("[GDD] pei_signal()"); #ifdef GDD_MAKE_DTX_CONTEXT_SWITCH /* Process signal */ switch (opc & GDD_DIO_SIGNAL_MASK) { case GDD_DIO_SIGNAL_SEND_DATA: gdd_dio_rx_sig_send_data(con_handle, (T_dio_buffer *)data); break; case GDD_DIO_SIGNAL_RECEIVE_DATA: gdd_dio_drx_sig_receive_data(con_handle, (T_dio_buffer *)data); break; default: TRACE_ERROR("[GDD] Unknown Signal OPC"); return PEI_ERROR; } #else /* GDD_MAKE_DTX_CONTEXT_SWITCH */ /* If no context switch is done, there is only one signal to be handled. */ gdd_dio_drx_sig_receive_data(con_handle, (T_dio_buffer *)data); #endif /* GDD_MAKE_DTX_CONTEXT_SWITCH */ return PEI_OK; } /* +------------------------------------------------------------------------------ | Function : pei_exit +------------------------------------------------------------------------------ | Description : Close Resources and terminate. | | Parameters : - | | Return : PEI_OK - exit sucessful +------------------------------------------------------------------------------ */ static short pei_exit (void) { TRACE_FUNCTION ("[GDD] pei_exit"); /* * Close communication channels */ vsi_c_close (VSI_CALLER hCommGDD_DIO); hCommGDD_DIO = VSI_ERROR; return PEI_OK; } /* +------------------------------------------------------------------------------ | Function : pei_config +------------------------------------------------------------------------------ | Description : Dynamic Configuration. | | Parameters : in_string - configuration string | | Return : PEI_OK - sucessful | PEI_ERROR - not successful +------------------------------------------------------------------------------ */ static short pei_config (char *in_string) { TRACE_FUNCTION ("[GDD] pei_config()"); TRACE_FUNCTION (in_string); if ( ConfigTimer ( VSI_CALLER in_string, NULL ) == VSI_OK ) return PEI_OK; /* * further dynamic configuration */ #ifdef _SIMULATION_ if (!strncmp("sizeof(T_GDD_DIO_CON_DATA)",in_string,7)) { TRACE_EVENT_P1("[GDD] sizeof(T_GDD_DIO_CON_DATA) = %d", sizeof(T_GDD_DIO_CON_DATA)); } else if (!strncmp("PSI STUB ON",in_string, 11)) { TRACE_EVENT("[GDD] Activating the PSI STUB"); dio_il_sim_activate_psi_stub (TRUE); } else if (!strncmp("PSI STUB OFF",in_string, 12)) { TRACE_EVENT("[GDD] Deactivating the PSI STUB"); dio_il_sim_activate_psi_stub (FALSE); } else if (!strncmp("BATLIB TEST ON",in_string, 14)) { TRACE_EVENT("[GDD] Activating BATlib testing in PSI stub"); dio_il_psi_stub_activate_batlib_test (TRUE); } else if (!strncmp("BATLIB TEST OFF",in_string, 15)) { TRACE_EVENT("[GDD] Deactivating BATlib testing in PSI stub"); dio_il_psi_stub_activate_batlib_test (FALSE); } #endif /* _SIMULATION_ */ return PEI_OK; } /* +------------------------------------------------------------------------------ | Function : pei_monitor +------------------------------------------------------------------------------ | Description : Monitoring of physical Parameters. | | Parameters : out_monitor - return the address of the data to be monitored | | Return : PEI_OK - sucessful (address in out_monitor is valid) | PEI_ERROR - not successful +------------------------------------------------------------------------------ */ static short pei_monitor (void ** out_monitor) { TRACE_FUNCTION ("[GDD] pei_monitor()"); /* * Version = "0.S" (S = Step). */ gdd_dio_mon.version = "gdd_dio 0.1"; *out_monitor = &gdd_dio_mon; return PEI_OK; } /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : pei_create +------------------------------------------------------------------------------ | Description : Create the Protocol Stack Entity. | | Parameters : info - Pointer to the structure of entity parameters | | Return : PEI_OK - entity created successfully | +------------------------------------------------------------------------------ */ short gdd_dio_pei_create (T_PEI_INFO **info) { static T_PEI_INFO pei_info = { GDD_DIO_NAME, /* name */ { /* pei-table */ pei_init, #ifdef _SIMULATION_ pei_exit, #else NULL, #endif pei_primitive, pei_timeout, pei_signal, NULL, /* No pei_run function */ pei_config, pei_monitor }, /*1024,*/ /* stack size */ 2048, /* :TODO: check why we need to increase the stack size */ 10, /* queue entries */ 100, /* priority (1->low, 255->high) */ 0, /* number of timers */ 0x03 /* flags: bit 0 active(0) body/passive(1) */ }; /* bit 1 com by copy(0)/reference(1) */ /* * Export startup configuration data */ *info = &pei_info; return PEI_OK; } /*==== END OF FILE ==========================================================*/