FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/l2r/tra_upf.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : CSD (8411) | Modul : tra_upf.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the procedures and functions for | the component TRA +----------------------------------------------------------------------------- */ #ifndef TRA_UPF_C #define TRA_UPF_C #endif #define ENTITY_L2R /*==== INCLUDES ===================================================*/ #include <string.h> #include "typedefs.h" #include "pconst.cdg" #include "vsi.h" #include "macdef.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "pei.h" #include "tok.h" #include "dti.h" #include "cl_ribu.h" #include "tra_pei.h" #include "tra.h" #ifdef _TARGET_ #include "ra_l1int.h" #endif /*==== CONST =======================================================*/ /*==== TYPES =======================================================*/ /*==== VAR EXPORT ==================================================*/ /*==== VAR LOCAL ===================================================*/ /*==== FUNCTIONS ===================================================*/ /* +------------------------------------------------------------------------------ | Function : up_init +------------------------------------------------------------------------------ | Description : initialise the tra data for the uplink process | | Parameters : - | | | Return : - +------------------------------------------------------------------------------ */ GLOBAL void ul_init(T_TRA_UP *dul) { TRACE_FUNCTION ("ul_init()"); dul->sa = FL_INACTIVE; dul->sb = FL_INACTIVE; dul->x = FL_INACTIVE; dul->List_off = 0; INIT_STATE (UP, UP_INACTIVE); } /* +------------------------------------------------------------------------------ | Function : snd_break_to_RA +------------------------------------------------------------------------------ | Description : | | Parameters : - | | | Return : +------------------------------------------------------------------------------ */ GLOBAL void snd_break_to_RA(USHORT break_len) { #ifndef _SIMULATION_ T_RA_BREAK_REQ RA_break_req; RA_break_req.break_len = break_len; #endif TRACE_FUNCTION ("snd_break_to_RA()"); #ifndef _SIMULATION_ l1i_ra_break_req (&RA_break_req); #else { PALLOC (ra_break_req, RA_BREAK_REQ); ra_break_req->break_len = break_len; PSENDX (RA, ra_break_req); } #endif } /* +------------------------------------------------------------------------------ | Function : snd_data_to_RA +------------------------------------------------------------------------------ | Description : | | Parameters : - | | | Return : +------------------------------------------------------------------------------ */ GLOBAL void snd_data_to_RA(void) { T_TRA_UP *dul = &tra_data->up; T_FD *pFD = &dul->fd; T_desc2 *desc = (T_desc2*)dul->Prim->desc_list2.first; USHORT data_off = dul->List_off; /* offset within current data block */ USHORT data_len = dul->Prim->desc_list2.list_len; /* local mark for overall data size to be copied */ TRACE_FUNCTION ("snd_data_to_RA()"); pFD->type = FR_TRANS; pFD->status = 0; pFD->len = 0; /* to mark current sdu fill status */ if (dul->req_frames) { while (desc) { if (desc->len <= (dul->req_frames - pFD->len)) /* DTI data size less than SDU space*/ { T_desc2 *desc_im = (T_desc2*)desc->next; memcpy(&dul->to_ra[pFD->len], desc->buffer + data_off, desc->len); pFD->len += desc->len; data_len -= desc->len; data_off = 0; /* list is copied completely! */ MFREE (desc); desc = (T_desc2*) desc_im; } else /* more DTI data than SDU space*/ { memcpy(&dul->to_ra[pFD->len], desc->buffer + data_off, dul->req_frames - pFD->len); data_off += (dul->req_frames - pFD->len); /* remember for next copying! */ desc->len -= (dul->req_frames - pFD->len); desc->size = desc->len; data_len -= (dul->req_frames - pFD->len); pFD->len = dul->req_frames; /* the SDU is full */ break; } } /* * write back current standings */ dul->Prim->desc_list2.first = (ULONG)desc; dul->Prim->desc_list2.list_len = data_len; dul->List_off = data_off; } if (dul->sa EQ DTI_SA_OFF) pFD->status |= ST_SA; if (dul->sb EQ DTI_SB_OFF) pFD->status |= ST_SB; if (dul->x EQ DTI_FLOW_OFF) pFD->status |= ST_X; #ifdef _TARGET_ l1i_ra_data_req_new(pFD); #else { PALLOC_SDU (ra_data_req, RA_DATA_REQ, (USHORT)(dul->req_frames<<3)); if (hCommRA < VSI_OK) { hCommRA = vsi_c_open (VSI_CALLER RA_NAME); } ra_data_req->fr_type = pFD->type; ra_data_req->status = pFD->status; ra_data_req->dtx_flg = DTX_DIS; ra_data_req->sdu.l_buf = pFD->len << 3; ra_data_req->sdu.o_buf = 0; memcpy(&ra_data_req->sdu.buf[0], &dul->to_ra[0], pFD->len); PSENDX (RA, ra_data_req); } #endif } /* +------------------------------------------------------------------------------ | Function : up_start_dti_flow +------------------------------------------------------------------------------ | Description : | | Parameters : - | | | Return : - +------------------------------------------------------------------------------ */ GLOBAL void up_start_dti_flow(void) { TRACE_FUNCTION ("up_start_dti_flow()"); dti_start(l2r_hDTI, TRA_DTI_UP_INSTANCE, TRA_DTI_UP_INTERFACE, TRA_DTI_UP_CHANNEL); }