FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/ppp/ppp_arbf.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity PPP and implements all | procedures and functions as described in the | SDL-documentation (ARB-statemachine) +----------------------------------------------------------------------------- */ #ifndef PPP_ARBF_C #define PPP_ARBF_C #endif /* !PPP_ARBF_C */ #define ENTITY_PPP /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" /* to get a lot of macros */ #include "gsm.h" /* to get a lot of macros */ #include "cnf_ppp.h" /* to get cnf-definitions */ #include "mon_ppp.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" /* to get the DTILIB definitions */ #include "ppp.h" /* to get the global entity definitions */ #include "ppp_lcpf.h" /* to get function interface from lcp */ #include "ppp_papf.h" /* to get function interface from pap */ #include "ppp_capf.h" /* to get function interface from chap */ #include "ppp_ncpf.h" /* to get function interface from ncp */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : arb_init +------------------------------------------------------------------------------ | Description : The function arb_init() inizializes the arbitration (ARB) | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void arb_init () { TRACE_FUNCTION( "arb_init" ); /* * initialize protocol-reject identifier */ ppp_data->arb.pri = 1; /* * initialize time out counter */ ppp_data->arb.to_counter = 1; /* * initialize pointer to last sent IPCP packet */ ppp_data->arb.last_ipcp = NULL; INIT_STATE( PPP_SERVICE_ARB , ARB_DEAD ); /* * DTI channels */ ppp_data->arb.dti_connect_state_prot = DTI_CLOSED; ppp_data->arb.dti_connect_state_peer = DTI_CLOSED; } /* arb_init() */ /* +------------------------------------------------------------------------------ | Function : arb_discard_packet +------------------------------------------------------------------------------ | Description : The function arb_discard_packet() frees the memory of | the given packet | | Parameters : packet - pointer to a generic data descriptor | +------------------------------------------------------------------------------ */ GLOBAL void arb_discard_packet (T_desc2* packet) { T_desc2* temp_desc; TRACE_FUNCTION( "arb_discard_packet" ); while(packet NEQ NULL) { temp_desc=(T_desc2*)packet->next; MFREE(packet); packet=temp_desc; } } /* arb_discard_packet() */ /* +------------------------------------------------------------------------------ | Function : arb_get_protocol_reject +------------------------------------------------------------------------------ | Description : The function arb_get_protocol_reject() creates | a LCP protocol reject | | Parameters : ptype - packet type | packet - packet which have to be rejected | ptr_packet - returns a LCP protocol reject packet | +------------------------------------------------------------------------------ */ GLOBAL void arb_get_protocol_reject (USHORT ptype, T_desc2* packet, T_desc2** ptr_packet) { USHORT temp_len; T_desc2* temp_desc; T_desc2* ret_desc; TRACE_FUNCTION( "arb_get_protocol_reject" ); /* * 1 octet code field * 1 octet identifier field * 2 octets length field * 2 octets rejected-protocol field *---------- * 6 octets */ MALLOC (ret_desc, (USHORT)(sizeof(T_desc2) - 1 + 6)); ret_desc->next = (ULONG)packet; ret_desc->len = 6; /* * Code field for protocol reject */ ret_desc->buffer[0] = CODE_PROT_REJ; /* * Identifier field */ ret_desc->buffer[1] = ppp_data->arb.pri;/*lint !e415 (Warning -- access of out-of-bounds pointer) */ ppp_data->arb.pri++; /* * Length field */ temp_len = 0; packet = ret_desc; while(packet NEQ NULL) { temp_len+= packet->len; packet = (T_desc2*)packet->next; } if(temp_len > PPP_MRU_MIN) temp_len=ppp_data->mru; ret_desc->buffer[2] = (UBYTE)(temp_len >> 8);/*lint !e415 !e416 (Warning -- access/creation of out-of-bounds pointer) */ ret_desc->buffer[3] = (UBYTE)(temp_len & 0x00ff);/*lint !e415 !e416 (Warning -- access/creation of out-of-bounds pointer) */ /* * Rejected-Protocol field */ ret_desc->buffer[4] = (UBYTE)(ptype >> 8);/*lint !e415 !e416 (Warning -- access/creation of out-of-bounds pointer) */ ret_desc->buffer[5] = (UBYTE)(ptype & 0x00ff);/*lint !e415 !e416 (Warning -- access/creation of out-of-bounds pointer) */ /* * cut the rejected packet if it is to long */ packet = ret_desc; while(temp_len > packet->len) { temp_len-= packet->len; packet = (T_desc2*)packet->next; } packet->len = temp_len; temp_desc = (T_desc2*)packet->next; packet->next = (ULONG)NULL; while(temp_desc NEQ NULL) { packet = (T_desc2*)temp_desc->next; MFREE(temp_desc); temp_desc = packet; } /* * return created protocol reject packet */ *ptr_packet = ret_desc; /*lint -e415 -e416 (Warning -- access/creation of out-of-bounds pointer) */ } /* arb_get_protocol_reject() */ /* +------------------------------------------------------------------------------ | Function : arb_get_pco_list +------------------------------------------------------------------------------ | Description : The function arb_get_pco_list() creates the list of | protocol configuratrion options as shown in 10.5.6.3/GSM 04.08 | | Parameters : ptr_pco_list - returns list of protocol configuration options | +------------------------------------------------------------------------------ */ GLOBAL void arb_get_pco_list (T_sdu* ptr_pco_list) { UBYTE ap; USHORT mru; ULONG accm; UBYTE pfc; UBYTE acfc; TRACE_FUNCTION( "arb_get_pco_list" ); /* * initialize sdu */ ptr_pco_list->o_buf=0; ptr_pco_list->l_buf=0; /* * declare Configuration Protocol PPP */ ptr_pco_list->buf[ptr_pco_list->l_buf]=0x80; ptr_pco_list->l_buf++; /* * first packets are LCP packets */ lcp_fill_out_packet(ptr_pco_list->buf, &ptr_pco_list->l_buf); /* * next packets may be authentication packets */ if(ppp_data->pco_mask & PPP_PCO_MASK_AUTH_PROT) { lcp_get_values(&ap, &mru, &accm, &pfc, &acfc); switch(ap) { case PPP_AP_PAP: /* * insert PAP authentication packet */ pap_fill_out_packet(ptr_pco_list->buf, &ptr_pco_list->l_buf); break; case PPP_AP_CHAP: /* * insert CHAP authentication packets */ chap_fill_out_packet(ptr_pco_list->buf, &ptr_pco_list->l_buf); break; } } /* * next packet is the IPCP packet received from PPP peer */ ncp_fill_out_packet(ptr_pco_list->buf, &ptr_pco_list->l_buf); /* * convert length in octet to length in bit */ ptr_pco_list->l_buf=ptr_pco_list->l_buf << 3; } /* arb_get_pco_list() */ /* +------------------------------------------------------------------------------ | Function : arb_analyze_pco_list +------------------------------------------------------------------------------ | Description : The function arb_analyze_pco_list() analyzes the given list of | protocol configuration options and returns values of interest | | Parameters : pco_list - list of protocol configuration options | ptr_dns1 - returns Primary DNS Server Address | ptr_dns2 - returns Secondary DNS Server Address | ptr_gateway - returns Gateway Address | +------------------------------------------------------------------------------ */ GLOBAL void arb_analyze_pco_list (T_sdu* pco_list, ULONG* ptr_dns1, ULONG* ptr_dns2, ULONG* ptr_gateway) { USHORT pos; TRACE_FUNCTION( "arb_analyze_pco_list" ); /* * initialize return values */ *ptr_dns1 = PPP_PDNS_DEFAULT; *ptr_dns2 = PPP_SDNS_DEFAULT; *ptr_gateway = PPP_GATEWAY_DEFAULT; /* * analyze pco list */ pco_list->l_buf = pco_list->l_buf >> 3; pco_list->o_buf = pco_list->o_buf >> 3; pos = pco_list->o_buf; if((pco_list->l_buf > 0) && (pco_list->buf[pos] EQ 0x80)) { pos++; while(pos < (pco_list->l_buf + pco_list->o_buf)) { if((pco_list->buf[pos] EQ PROTOCOL_IPCP_MSB) && (pco_list->buf[pos + 1] EQ PROTOCOL_IPCP_LSB)) { /* * determine DNS addresses and Gateway address */ ncp_analyze_pco (pco_list->buf, pos, ptr_dns1, ptr_dns2, ptr_gateway); } pos+= pco_list->buf[pos + 2] + 3; } } } /* arb_analyze_pco_list() */ /* +------------------------------------------------------------------------------ | Function : arb_dti_close_prot_ind +------------------------------------------------------------------------------ | Description : Close the DTI Protocol Channel | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void arb_dti_close_prot_ind () { TRACE_FUNCTION("arb_dti_close_prot_ind"); switch (ppp_data->arb.dti_connect_state_prot) { case DTI_SETUP: case DTI_IDLE: dti_close(ppp_data->ppphDTI, PPP_INSTANCE, PROT_LAYER, PROT_CHANNEL, FALSE); ppp_data->arb.dti_connect_state_prot = DTI_CLOSED; break; default: break; } } /* arb_dti_close_prot_ind */ /* +------------------------------------------------------------------------------ | Function : arb_dti_close_peer_ind +------------------------------------------------------------------------------ | Description : Close the DTI Peer Channel | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void arb_dti_close_peer_ind () { TRACE_FUNCTION("arb_dti_close_peer_ind"); switch (ppp_data->arb.dti_connect_state_peer) { case DTI_SETUP: case DTI_IDLE: dti_close(ppp_data->ppphDTI, PPP_INSTANCE, PEER_LAYER, PEER_CHANNEL, FALSE); ppp_data->arb.dti_connect_state_peer = DTI_CLOSED; break; default: break; } } /* arb_dti_close_peer_ind */