FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/ppp/ppp_prxf.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity PPP and implements all | procedures and functions as described in the | SDL-documentation (PRX-statemachine) +----------------------------------------------------------------------------- */ #define ENTITY_PPP /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" /* to get a lot of macros */ /*lint -efile(766,gsm.h) */ #include "gsm.h" /* to get a lot of macros */ /*lint -efile(766,cnf_ppp.h) */ #include "cnf_ppp.h" /* to get cnf-definitions */ /*lint -efile(766,mon_ppp.h) */ #include "mon_ppp.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" /* to get the DTILIB definitions */ #include "ppp.h" /* to get the global entity definitions */ #ifdef FF_STATUS_TE #include "gdi.h" /* To include driver type-defines */ #include "ste.h" /* To include function interface for TE status driver */ #include "ppp_prxf.h" /* To include call-back function for TE status driver */ #endif /* FF_STATUS_TE */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : prx_init +------------------------------------------------------------------------------ | Description : The function prx_init() initializes Packet Receive (PRX) | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void prx_init () { TRACE_FUNCTION( "prx_init" ); #if defined FF_STATUS_TE /* * Init of the TE status driver - the handle is unique inside PPP only, SMN * PPP handle-management are placed in the end of ppp.h */ if (DRV_OK NEQ STE_Init( STE_HANDLE, cb_status_TE )) { /* * Error during init of TE status driver - either it is already init or it has failed */ TRACE_ERROR( "STE driver init. error" ); } else { #ifdef _SIMULATION_ TRACE_EVENT( "Return DRV_OK from STE_Init()" ); #endif /* _SIMULATION_ */ /* * Setup of used signal-types for driver to trig a callback */ if (DRV_OK NEQ STE_SetSignal( DRV_SIGTYPE_READ )) { /* * Error during signal-set - either signal illegal, not available or internal fail */ TRACE_ERROR( "STE driver setup error" ); } #ifdef _SIMULATION_ else { TRACE_EVENT( "Return DRV_OK from STE_SetSignal()" ); } #endif /* _SIMULATION_ */ } /* * initialize variables */ ppp_data->prx.TE_data_buffer_desc_list_first = NULL; ppp_data->prx.TE_data_buffer_p_id = DTI_PID_UOS; ppp_data->prx.TE_data_buffered = FALSE; #endif /* FF_STATUS_TE */ INIT_STATE( PPP_SERVICE_PRX , PRX_DEAD ); } /* prx_init() */ #ifdef FF_STATUS_TE /* +------------------------------------------------------------------------------ | Function : cb_status_TE +------------------------------------------------------------------------------ | Description : Handles the call-back from the TE status driver and sends the | NEW_POWER_STATUS signal to the PS | | Parameters : None | +------------------------------------------------------------------------------ */ GLOBAL void cb_status_TE (T_DRV_SIGNAL * signal) { TRACE_FUNCTION( "cb_status_TE" ); if((signal->SignalType EQ DRV_SIGTYPE_READ) && (signal->DrvHandle EQ STE_HANDLE) && (*((USHORT*)signal->UserData) EQ STE_IDENTIFIER_POWER)) { PSIGNAL(hCommPPP, NEW_POWER_STATUS, NULL); } else { TRACE_ERROR( "STE driver: Signal not supported" ); } } /* cb_status_TE() */ #endif /* FF_STATUS_TE */