FreeCalypso > hg > fc-tourmaline
view src/g23m-fad/t30/cus_t30.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : CUS_T30 +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for the | Protocol Stack Entity | T30 +----------------------------------------------------------------------------- */ #ifndef CUS_T30_H #define CUS_T30_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the T30 timers * If the target system uses other units please * change the values. */ #define T1_VALUE 35000 /* ms +/- 5000 ms */ #define T2_VALUE 6000 /* ms +/- 1000 ms */ #define T4_VALUE 3000 /* ms +/- 15% */ #define DCN_VALUE 500 #define MSG_VALUE 12500 #define FRAMES_400 1846 /* * TIMER IDENTIFIER * * Description : The constants define the identifier of the * timer resources of T30. The identifier is used * to reference a timer in a config primitive */ #define T1_NAME "T1" #define T2_NAME "T2" #define T4_NAME "T4" /* * MAX_T30_TIMER * * Description : The constant define the number of timer * available in the timer pool. This should be * the amount of timer which can be active * simultaneously. */ #define MAX_T30_TIMER 3 /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char #define VERSION_T30 "T30 2.0" /* NEW_FRAME only */ /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_t30 (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER t30_handle, #define VSI_CALLER_SINGLE t30_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif