FreeCalypso > hg > fc-tourmaline
view src/g23m-gprs/grr/grr_em.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Module defines the engineering mode (EM) device driver for the | G23 protocol stack. This driver is used to control all engineering | mode related functions. +----------------------------------------------------------------------------- */ #ifndef GRR_EM_C #define GRR_EM_C #define ENTITY_GRR /*--------- INCLUDES -----*/ /* Maybee some include is missing, but compiling has worked*/ #include <string.h> /*definition of memset*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "custom.h" /*set FF_EM_MODE compile switch for SIMULATION*/ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "message.h" #include "grr.h" /* to get the global entity definitions */ #include "grr_em.h" /* to get the definition for EM */ #ifdef FF_EM_MODE /*-----Variables------------------*/ /* * em_dsc_val is used for the engineering mode. To avoid unnecessary primitive sending * this variable is defined as global and is used between entities. */ GLOBAL UBYTE em_dsc_val = 0; #endif /* FF_EM_MODE */ /*-----------Functions ----------------*/ #ifdef FF_EM_MODE /* +------------------------------------------------------------------------------ | Function : grr_em_pco_trace_req | | Parameter : *grr_em_pco_trace_req (EM_PCO_TRACE_REQ ) | | Result : void | +------------------------------------------------------------------------------ This function traces the EM data at the PCO. */ GLOBAL void grr_em_pco_trace_req ( T_EM_PCO_TRACE_REQ * em_pco_trace_req ) { if(em_pco_trace_req->pco_bitmap & EM_PCO_GPRS_INFO) { TRACE_EVENT_EM_P5("EM_SC_GPRS_INFO_REQ: dl_nts:%d nmo:%d nw:%d pri_acc_thr:%d cba:%d", grr_data->downlink_tbf.nts, psc_db->cell_info_for_gmm.cell_info.net_mode, psc_db->net_ctrl.spgc_ccch_supp.nw_supp, psc_db->net_ctrl.priority_access_thr, psc_db->scell_par.cell_ba); TRACE_EVENT_EM_P6("EM_SC_GPRS_INFO_REQ: rac:%d tav:%d dsc:%d c31:%d c32:%d nco:%d", psc_db->cell_info_for_gmm.cell_info.cell_env.rai.rac, grr_data->ta_params.ta_value, em_dsc_val, grr_data->db.scell_info.cr_crit.c31, grr_data->db.scell_info.cr_crit.c32, psc_db->nc_cw.param.ctrl_order); } PFREE (em_pco_trace_req); }/*grr_em_pco_trace_req*/ /* +------------------------------------------------------------------------------ | Function : grr_em_sc_gprs_info_req | | Parameter : *em_sc_gprs_info_req (T_EM_SC_GPRS_INFO_REQ) | | Result : void | +------------------------------------------------------------------------------ */ GLOBAL void grr_em_sc_gprs_info_req (T_EM_SC_GPRS_INFO_REQ *em_sc_gprs_info_req) { PALLOC(em_sc_gprs_info_cnf, EM_SC_GPRS_INFO_CNF); PFREE(em_sc_gprs_info_req); TRACE_FUNCTION( "grr_em_sc_gprs_info_req" ); memset (em_sc_gprs_info_cnf, 0, sizeof (T_EM_SC_GPRS_INFO_CNF)); em_sc_gprs_info_cnf->tn = grr_data->downlink_tbf.nts; em_sc_gprs_info_cnf->nmo = psc_db->cell_info_for_gmm.cell_info.net_mode; em_sc_gprs_info_cnf->net_ctrl.spgc_ccch_sup = psc_db->net_ctrl.spgc_ccch_supp.nw_supp; em_sc_gprs_info_cnf->net_ctrl.priority_access_thr = psc_db->net_ctrl.priority_access_thr; em_sc_gprs_info_cnf->cba = psc_db->scell_par.cell_ba; em_sc_gprs_info_cnf->rac = psc_db->cell_info_for_gmm.cell_info.cell_env.rai.rac; em_sc_gprs_info_cnf->tav = grr_data->ta_params.ta_value; em_sc_gprs_info_cnf->dsc = em_dsc_val; em_sc_gprs_info_cnf->c31 = grr_data->db.scell_info.cr_crit.c31; em_sc_gprs_info_cnf->c32 = grr_data->db.scell_info.cr_crit.c32; em_sc_gprs_info_cnf->nco = psc_db->nc_cw.param.ctrl_order; PSEND (hCommGMM, em_sc_gprs_info_cnf); } /* +------------------------------------------------------------------------------ | Function : grr_em_fmm_sc_gprs_info_req | | Parameter : *em_fmm_sc_gprs_info_req (EM_FMM_SC_GPRS_INFO_REQ) | | Result : void | +------------------------------------------------------------------------------ This function provides data needed for microtec fmm. this is the only requested data, that is not available in RR. */ GLOBAL void grr_em_fmm_sc_gprs_info_req (T_EM_FMM_SC_GPRS_INFO_REQ * em_fmm_sc_gprs_info_req) { PALLOC(em_fmm_sc_gprs_info_cnf, EM_FMM_SC_GPRS_INFO_CNF); PFREE(em_fmm_sc_gprs_info_req); TRACE_FUNCTION( "grr_em_fmm_sc_gprs_info_req" ); memset (em_fmm_sc_gprs_info_cnf, 0, sizeof (T_EM_FMM_SC_GPRS_INFO_CNF)); em_fmm_sc_gprs_info_cnf->c31_hyst = psc_db->gen_cell_par.c31_hyst; if (psc_db->gen_cell_par.v_ra_re_hyst) em_fmm_sc_gprs_info_cnf->ra_re_hyst = psc_db->gen_cell_par.gprs_c_hyst; em_fmm_sc_gprs_info_cnf->nco = psc_db->nc_cw.param.ctrl_order; TRACE_EVENT_P3("c31_hyst:%d ra_re_hyst:%d nco:%d", em_fmm_sc_gprs_info_cnf->c31_hyst,\ em_fmm_sc_gprs_info_cnf->ra_re_hyst, em_fmm_sc_gprs_info_cnf->nco); #ifdef FF_WAP PSEND( hCommWAP , em_fmm_sc_gprs_info_cnf); #else /*FF_WAP*/ PFREE(em_fmm_sc_gprs_info_cnf); #endif /*FF_WAP*/ } /* +------------------------------------------------------------------------------ | Function : grr_em_fmm_tbf_info_req | | Parameter : *grr_em_fmm_tbf_info_req (EM_FMM_TBF_INFO_REQ) | | Result : void | +------------------------------------------------------------------------------ This function provides data needed for microtec fmm. this is the only requested data, that is not available in RR. */ GLOBAL void grr_em_fmm_tbf_info_req (T_EM_FMM_TBF_INFO_REQ *em_fmm_tbf_info_req) { PFREE(em_fmm_tbf_info_req); TRACE_FUNCTION( "grr_em_fmm_tbf_info_req" ); #ifdef FF_WAP { PALLOC(em_fmm_tbf_info_cnf, EM_FMM_TBF_INFO_CNF); memset (em_fmm_tbf_info_cnf, 0, sizeof (T_EM_FMM_TBF_INFO_CNF)); em_fmm_tbf_info_cnf->tbf_trans_type = grr_data->tbf_type; em_fmm_tbf_info_cnf->tbf_num_ults = grr_data->uplink_tbf.nts; em_fmm_tbf_info_cnf->tbf_num_rlc = grr_data->uplink_tbf.rlc_oct_cnt; /*TRACE_EVENT_P3("t: %d ts: %d r: %d", em_fmm_tbf_info_cnf->tbf_trans_type, em_fmm_tbf_info_cnf->tbf_num_ults, em_fmm_tbf_info_cnf->tbf_num_rlc);*/ PSEND(hCommWAP, em_fmm_tbf_info_cnf); } #endif /*FF_WAP*/ } #endif /* FF_EM_MODE */ #endif /*GRR_EM_C */