view src/g23m-gprs/llc/llc_llmes.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul is part of the entity LLC and implements all
|             functions to handles the incoming process internal signals as
|             described in the SDL-documentation (LLME-statemachine)
+-----------------------------------------------------------------------------
*/

#ifndef LLC_LLMES_C
#define LLC_LLMES_C
#endif

#define ENTITY_LLC

/*==== INCLUDES =============================================================*/

#include "typedefs.h"   /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gprs.h"
#include "gsm.h"        /* to get a lot of macros */
#include "cnf_llc.h"    /* to get cnf-definitions */
#include "mon_llc.h"    /* to get mon-definitions */
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "llc.h"        /* to get the global entity definitions */
#include "llc_uitxs.h"  /* to get signal interface to UITX */
#include "llc_uirxs.h"  /* to get signal interface to UIRX */
#include "llc_itxs.h"   /* to get signal interface to ITX */
#include "llc_irxs.h"   /* to get signal interface to IRX */
#include "llc_txs.h"    /* to get signal interface to TX */
#include "llc_uf.h"     /* to get signal interface to U */
#include "llc_us.h"     /* to get signal interface to U */


/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_reset_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_RESET_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_reset_ind (void)
{
  T_SAPI sapi;

  TRACE_ISIG( "sig_u_llme_reset_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * ATTENTION:
       * The following loop implies that all SAPIs are odd numbers beginning
       * with 1!
       */
      for (sapi = LL_SAPI_1; sapi <= LL_SAPI_11; sapi += 2)
      {
        SWITCH_LLC (sapi);

        sig_llme_uitx_reset_req();
        sig_llme_uirx_reset_req();

        if ((sapi NEQ LL_SAPI_1) AND (sapi NEQ LL_SAPI_7))
        {
          sig_llme_itx_reset_req();
          sig_llme_irx_reset_req();
        }

        sig_llme_tx_reset_req();
      }
      break;
    default:
      TRACE_ERROR( "SIG_U_LLME_RESET_IND unexpected" );
      break;
  }
} /* sig_u_llme_reset_ind() */

/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_ready_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_READY_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_ready_ind (void)
{
  T_SAPI sapi;

  TRACE_ISIG( "sig_u_llme_ready_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * ATTENTION:
       * The following loop implies that all SAPIs are odd numbers beginning
       * with 1!
       */
      for (sapi = LL_SAPI_1; sapi <= LL_SAPI_11; sapi += 2)
      {
        SWITCH_LLC (sapi);

        sig_llme_tx_ready_req();
      }

      break;
    default:
      TRACE_ERROR( "SIG_U_LLME_READY_IND unexpected" );
      break;
  }
} /* sig_u_llme_ready_ind() */



/*
+------------------------------------------------------------------------------
| Function    : sig_itx_llme_reest_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_ITX_LLME_REEST_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
#ifdef CC_CONCEPT
GLOBAL void sig_itx_llme_reest_ind (USHORT error_cause)
#else
GLOBAL void sig_itx_llme_reest_ind (UBYTE error_cause)
#endif
{
  TRACE_ISIG( "sig_itx_llme_reest_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      /*
       * First stop ABM operation
       */
      sig_llme_irx_abmrel_req();
      sig_llme_itx_abmrel_req();
      sig_llme_tx_flush_req(SERVICE_ITX);

      /*
       * Then initiate connection re-establishment
       */
      {
        PALLOC (llgmm_status_ind, LLGMM_STATUS_IND);/*T_LLGMM_STATUS_IND*/

#ifdef LL_2to1
        llgmm_status_ind->ps_cause.ctrl_value = CAUSE_is_from_llc;
        llgmm_status_ind->ps_cause.value.llc_cause = error_cause;
#else
        llgmm_status_ind->error_cause = error_cause;
#endif

        PSEND (hCommGMM, llgmm_status_ind);
      }

      TRACE_1_INFO("Init re-establishment s:%d", llc_data->current_sapi);
      sig_llme_u_reest_req();
      break;

    default:
      TRACE_ERROR( "SIG_ITX_LLME_REEST_IND unexpected" );
      break;
  }
} /* sig_itx_llme_reest_ind() */


/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_abmest_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_ABMEST_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_abmest_ind (void)
{
  TRACE_ISIG( "sig_u_llme_abmest_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      sig_llme_tx_flush_req (SERVICE_ITX);
      sig_llme_irx_abmest_req();
      sig_llme_itx_abmest_req();
      break;

    default:
      TRACE_ERROR( "SIG_U_LLME_ABMEST_IND unexpected" );
      break;
  }
} /* sig_u_llme_abmest_ind() */




/*
+------------------------------------------------------------------------------
| Function    : sig_u_llme_abmrel_ind
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_U_LLME_ABMREL_IND
|
| Parameters  :
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_u_llme_abmrel_ind (void)
{
  TRACE_ISIG( "sig_u_llme_abmrel_ind" );

  switch( GET_STATE( LLME ) )
  {
    case LLME_TLLI_ASSIGNED:
      /* No break. */
    case LLME_TLLI_ASSIGNED_SUSPENDED:
      sig_llme_irx_abmrel_req();
      sig_llme_itx_abmrel_req();
      sig_llme_tx_flush_req(SERVICE_ITX);
      break;

    default:
      TRACE_ERROR( "SIG_U_LLME_ABMREL_IND unexpected" );
      break;
  }
} /* sig_u_llme_abmrel_ind() */