FreeCalypso > hg > fc-tourmaline
view src/g23m-gprs/llc/llc_par.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Default values of the LLC layer parameters | (conforming to GSM 04.64) +----------------------------------------------------------------------------- */ #ifndef LLC_PAR_H #define LLC_PAR_H /* * Default values for the LLC layer parameters (conforming to GSM 04.64). */ #define LLC_VERSION_ALL_SAPIS 0 #define LLC_IOV_UI_ALL_SAPIS 0 /* * The default IOV-I values are calculated with the following formula: * 2^27 * SAPI */ #define LLC_IOV_I_SAPI_3 402653184L #define LLC_IOV_I_SAPI_5 671088640L #define LLC_IOV_I_SAPI_9 1207959552L #define LLC_IOV_I_SAPI_11 1476395008L /* * Timer values are negotiated in units of 0.1 seconds but are stored * in milliseconds. * NOTE: T201 uses value of T200. */ #define LLC_T200_SAPI_1 (50 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_3 (50 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_5 (100 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_7 (200 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_9 (200 * XID_TIMER_CONVERSION) #define LLC_T200_SAPI_11 (400 * XID_TIMER_CONVERSION) #define LLC_N200_SAPI_1 3 #define LLC_N200_SAPI_3 3 #define LLC_N200_SAPI_5 3 #define LLC_N200_SAPI_7 3 #define LLC_N200_SAPI_9 3 #define LLC_N200_SAPI_11 3 #define LLC_N201_U_SAPI_1 400 #define LLC_N201_U_SAPI_3 500 #define LLC_N201_U_SAPI_5 500 #define LLC_N201_U_SAPI_7 270 #define LLC_N201_U_SAPI_9 500 #define LLC_N201_U_SAPI_11 500 #define LLC_N201_I_SAPI_3 1503 #define LLC_N201_I_SAPI_5 1503 #define LLC_N201_I_SAPI_9 1503 #define LLC_N201_I_SAPI_11 1503 #define LLC_MD_SAPI_3 1520 #define LLC_MD_SAPI_5 760 #define LLC_MD_SAPI_9 380 #define LLC_MD_SAPI_11 190 #define LLC_MU_SAPI_3 1520 #define LLC_MU_SAPI_5 760 #define LLC_MU_SAPI_9 380 #define LLC_MU_SAPI_11 190 #define LLC_KD_SAPI_3 16 #define LLC_KD_SAPI_5 8 #define LLC_KD_SAPI_9 4 #define LLC_KD_SAPI_11 2 #define LLC_KU_SAPI_3 16 #define LLC_KU_SAPI_5 8 #define LLC_KU_SAPI_9 4 #define LLC_KU_SAPI_11 2 #endif /* LLC_PAR_H */