FreeCalypso > hg > fc-tourmaline
view src/g23m-gprs/llc/llc_txl.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity LLC and implements all labels | in the SDL-documentation (TX-statemachine) that are called from | more than one diagram/place. +----------------------------------------------------------------------------- */ #ifndef LLC_TXL_C #define LLC_TXL_C #endif #define ENTITY_LLC /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "cnf_llc.h" /* to get cnf-definitions */ #include "mon_llc.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "llc.h" /* to get the global entity definitions */ #include "llc_uitxs.h" /* to get signal interface to UITX */ #include "llc_itxs.h" /* to get signal interface to ITX */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ #ifdef TRACE_EVE LOCAL void tx_trace_outprim_para(UBYTE sapi, T_sdu *frame) { int len = BYTELEN(frame->l_buf); if( (len >= U_CTRL_MIN_OCTETS) && ((frame->buf[(frame->o_buf/8)+1] & U_FRAME_MASK) EQ U_FRAME_ID) ) { switch (frame->buf[(frame->o_buf/8)+1] & 0x0F) { case U_FRAME_DM: TRACE_2_OUT_PARA("DM s:%d len:%d", sapi, len); break; case U_FRAME_DISC: TRACE_2_OUT_PARA("DISC s:%d len:%d", sapi, len); break; case U_FRAME_UA: TRACE_2_OUT_PARA("UA s:%d len:%d", sapi, len); break; case U_FRAME_SABM: TRACE_2_OUT_PARA("SABM s:%d len:%d", sapi, len); break; case U_FRAME_FRMR: TRACE_2_OUT_PARA("FRMR s:%d len:%d", sapi, len); break; case U_FRAME_XID: TRACE_2_OUT_PARA("XID s:%d len:%d", sapi, len); break; default: TRACE_2_OUT_PARA("U ??? s:%d len:%d", sapi, len);break; } } else if( (len >= UI_CTRL_MIN_OCTETS) && ((frame->buf[(frame->o_buf/8)+1] & UI_FRAME_MASK) EQ UI_FRAME_ID) ) { T_FRAME_NUM nr; USHORT cipher = (USHORT)(frame->buf[(frame->o_buf/8)+2] >> 1) & 0x0001; nr = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x07) << 6; nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 2); TRACE_4_OUT_PARA("UI s:%d len:%d nr:%d c:%d", sapi, len, nr, cipher); } else if ((len >= I_CTRL_MIN_OCTETS) && (frame->buf[(frame->o_buf/8)+1] & I_FRAME_MASK) EQ I_FRAME_ID) { T_FRAME_NUM ns, nr; ns = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x1F) << 4; ns |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 4); nr = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] & 0x07) << 6; nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+3] >> 2); /* * Determine the command of the I frame (S1 & S2 bits) */ switch (frame->buf[(frame->o_buf/8)+3] & 0x03) { case I_FRAME_RR: TRACE_4_OUT_PARA("I-RR s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns); break; case I_FRAME_ACK: TRACE_4_OUT_PARA("I-ACK s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns); break; case I_FRAME_RNR: TRACE_4_OUT_PARA("I-RNR s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns); break; case I_FRAME_SACK:TRACE_4_OUT_PARA("I-SACK s:%d len:%d nr:%d ns:%d", sapi, len, nr, ns);break; default: TRACE_2_OUT_PARA("I ??? s:%d len:%d", sapi, len); break; } } else if( (len >= S_CTRL_MIN_OCTETS) && (frame->buf[(frame->o_buf/8)+1] & S_FRAME_MASK) EQ S_FRAME_ID) { T_FRAME_NUM nr; nr = (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+1] & 0x07) << 6; nr |= (T_FRAME_NUM)(frame->buf[(frame->o_buf/8)+2] >> 2); switch (frame->buf[(frame->o_buf/8)+2] & 0x03) { case I_FRAME_RR: TRACE_3_OUT_PARA("S-RR s:%d len:%d nr:%d", sapi, len, nr); break; case I_FRAME_ACK: TRACE_3_OUT_PARA("S-ACK s:%d len:%d nr:%d", sapi, len, nr); break; case I_FRAME_RNR: TRACE_3_OUT_PARA("S-RNR s:%d len:%d nr:%d", sapi, len, nr); break; case I_FRAME_SACK:TRACE_3_OUT_PARA("S-SACK s:%d len:%d nr:%d", sapi, len, nr);break; default: TRACE_2_OUT_PARA("S ??? s:%d len:%d", sapi, len); break; } } else { TRACE_2_OUT_PARA("??? s:%d len:%d", sapi, len); } } /* tx_trace_outprim_para() */ #endif /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : tx_label_s_data +------------------------------------------------------------------------------ | Description : Describes label S_DATA | | Parameters : rx_service - indicates the service to receive a READY_IND | signal, or NO_SERVICE | grlc_data_req - a valid pointer to a GRLC_DATA_REQ primitive | +------------------------------------------------------------------------------ */ GLOBAL void tx_label_s_data (T_SERVICE rx_service, T_GRLC_DATA_REQ *grlc_data_req) { UBYTE sapi = grlc_data_req->sapi; TRACE_FUNCTION( "tx_label_s_data" ); #ifdef TRACE_EVE tx_trace_outprim_para (sapi, &grlc_data_req->sdu); #endif PSEND (hCommGRLC, grlc_data_req); SET_STATE (TX, TX_TLLI_ASSIGNED_NOT_READY); /* * Recursion possible. Therefore send ready indication after all! */ if (rx_service EQ SERVICE_UITX) { SWITCH_LLC (sapi); sig_tx_uitx_ready_ind(); } else if (rx_service EQ SERVICE_ITX) { SWITCH_LLC (sapi); sig_tx_itx_ready_ind(); } return; } /* tx_label_s_data() */ /* +------------------------------------------------------------------------------ | Function : tx_label_s_unitdata +------------------------------------------------------------------------------ | Description : Describes label S_UNITDATA | | Parameters : rx_service - indicates the service to receive a | READY_IND signal, or NO_SERVICE | grlc_unitdata_req - a valid pointer to a GRLC_UNITDATA_REQ | primitive | +------------------------------------------------------------------------------ */ GLOBAL void tx_label_s_unitdata (T_SERVICE rx_service, T_GRLC_UNITDATA_REQ *grlc_unitdata_req) { UBYTE sapi = grlc_unitdata_req->sapi; TRACE_FUNCTION( "tx_label_s_unitdata" ); #ifdef TRACE_EVE tx_trace_outprim_para (sapi, &grlc_unitdata_req->sdu); #endif PSEND (hCommGRLC, grlc_unitdata_req); SET_STATE (TX, TX_TLLI_ASSIGNED_NOT_READY); /* * Handle ready indication at last! Recursion possible! */ if (rx_service EQ SERVICE_UITX) { SWITCH_LLC (sapi); sig_tx_uitx_ready_ind(); } return; } /* tx_label_s_unitdata() */ /* +------------------------------------------------------------------------------ | Function : tx_label_s_removed +------------------------------------------------------------------------------ | Description : Describes label S_REMOVED | | Parameters : rx_service - indicates the service to receive a | READY_IND signal, or NO_SERVICE | sapi - sapi of removed entry | +------------------------------------------------------------------------------ */ GLOBAL void tx_label_s_removed (T_SERVICE rx_service, UBYTE sapi) { TRACE_FUNCTION( "tx_label_s_removed" ); if (rx_service EQ SERVICE_UITX) { SWITCH_LLC (sapi); sig_tx_uitx_ready_ind(); } else if (rx_service EQ SERVICE_ITX) { SWITCH_LLC (sapi); sig_tx_itx_ready_ind(); } return; } /* tx_label_s_removed() */