FreeCalypso > hg > fc-tourmaline
view src/g23m-gprs/llc/llc_uitxp.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity LLC and implements all | functions to handles the incoming primitives as described in | the SDL-documentation (UITX-statemachine) +----------------------------------------------------------------------------- */ #ifndef LLC_UITXP_C #define LLC_UITXP_C #endif #define ENTITY_LLC /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "cnf_llc.h" /* to get cnf-definitions */ #include "mon_llc.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "llc.h" /* to get the global entity definitions */ #include "llc_f.h" #include "llc_uitxf.h" /* to get local UITX functions */ #include "llc_txs.h" /* to get signal interface to TX */ #include <string.h> /* to get memcpy */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : uitx_ll_unitdesc_req +------------------------------------------------------------------------------ | Description : Handles the primitive LL_UNITDESC_REQ | | Parameters : *ll_unitdesc_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ /*#if defined(CF_FAST_EXEC) || defined(_SIMULATION_) || \ defined(LL_2to1) */ GLOBAL void uitx_ll_unitdesc_req ( #ifdef LL_DESC T_LL_UNITDESC_REQ *ll_unitdesc_req_ #else T_LL_UNITDATA_REQ *ll_unitdesc_req_ #endif ) { /* * Indicates if the frame shall be ciphered or not (LL_CIPHER_ON/OFF). */ UBYTE cipher; T_FRAME_NUM used_nu; ULONG used_oc; TRACE_FUNCTION( "uitx_ll_unitdesc_req" ); { /* * PPASS added to let the FRAME know that the primitive has to be copied * now for duplicating primiives. Otherwise the changed primitie will be duplicated */ #ifdef LL_DESC PPASS (ll_unitdesc_req_, ll_unitdesc_req, LL_UNITDESC_REQ); #else PPASS (ll_unitdesc_req_, ll_unitdesc_req, LL_UNITDATA_REQ); #endif SWITCH_LLC (ll_unitdesc_req->sapi); #ifdef REL99 llc_data->cur_pfi = ll_unitdesc_req->pkt_flow_id; /* store current packet flow identifier */ TRACE_EVENT_P1("packet flow id = %d",ll_unitdesc_req->pkt_flow_id); #endif llc_data->cur_qos = ll_unitdesc_req->ll_qos; /* store current QoS */ llc_data->cur_radio_prio = ll_unitdesc_req->radio_prio; /* store current radio prioirity */ /* The stored PFI,QOS and radio priority is later used to copy to PFI,QOS and radio priority respectively of control messages like SABM,DM,XID response,etc. */ TRACE_EVENT_P1("radio priority = %d",ll_unitdesc_req->radio_prio); TRACE_EVENT_P1("peak throughput = %d",ll_unitdesc_req->ll_qos.peak); /* * Overwrite cipher request on all SAPIs except GMM. They don't * know anything about ciphering in current design. */ if (ll_unitdesc_req->sapi != LL_SAPI_1) { if (llc_data->ciphering_algorithm == LLGMM_CIPHER_NO_ALGORITHM) cipher = LL_CIPHER_OFF; else cipher = LL_CIPHER_ON; } else { cipher = ll_unitdesc_req->cipher; } #ifdef LL_DESC TRACE_3_PARA("s:%d len:%d c:%d", ll_unitdesc_req->sapi, ll_unitdesc_req->desc_list3.list_len, cipher ); #else TRACE_3_PARA("s:%d len:%d c:%d", ll_unitdesc_req->sapi, BYTELEN(ll_unitdesc_req->sdu.l_buf), cipher ); #endif /* * Set up the attached counter to CCI_NO_ATTACHE. */ ll_unitdesc_req->attached_counter = CCI_NO_ATTACHE; #ifdef REL99 /* * Packet flow identifier is passed transparantly if data request is from SNDCP. * If data request is from GMM fill PFI = LL_PFI_SIGNALING, * If data request is from GSMS fill PFI = LL_PFI_SMS * for all other SAPs(if sapi 2 & 8 are supported in future) set pkt_flow_id is to LL_PKT_FLOW_ID_NOT_PRES, * until specification are clarified. */ switch(ll_unitdesc_req->sapi) { case LL_SAPI_3: case LL_SAPI_5: case LL_SAPI_9: case LL_SAPI_11: /*Packet flow identifier is passed transparantly if data request is from SNDCP.*/ break; case LL_SAPI_1: /* * From 24.008 & 23.060 it is interpreted that for all signalling data, a * predefined PFI LL_PFI_SIGNALING shall be used. */ ll_unitdesc_req->pkt_flow_id = LL_PFI_SIGNALING; ll_unitdesc_req->ll_qos.peak = LL_PEAK_256K; break; case LL_SAPI_7: /* * From 24.008 & 23.060 it is interpreted that for all SMS data, a * predefined PFI LL_PFI_SMS shall be used. */ ll_unitdesc_req->pkt_flow_id = LL_PFI_SMS; break; default: /* * It is possible when system support llc sapi 2 and 8. * Fill PFI valuse it LL_PKT_FLOW_ID_NOT_PRES, until it is clarified in the specifications. */ ll_unitdesc_req->pkt_flow_id = LL_PKT_FLOW_ID_NOT_PRES; break; } #endif /* REL99 */ /* * In case of SAPI 7 (GSMS) all requests has to use the relclass LL_RLC_PROT. */ if (ll_unitdesc_req->sapi EQ LL_SAPI_7) { ll_unitdesc_req->ll_qos.relclass = LL_RLC_PROT; } switch (GET_STATE(UITX)) { case UITX_ADM_READY: /* * NOTE: uitx_build_ui_header expects desc_list3 to already contain data. * The header is inserted _before_ the data, so desc_list3.o_buf is being * decremented. */ uitx_build_ui_header ( #ifdef LL_DESC &ll_unitdesc_req->desc_list3, #else &ll_unitdesc_req->sdu, #endif MS_COMMAND, ll_unitdesc_req->sapi, llc_data->uitx->vu, cipher, ll_unitdesc_req->ll_qos.relclass ); used_nu = llc_data->uitx->vu; used_oc = llc_data->sapi->oc_ui_tx; llc_data->uitx->vu ++; if (llc_data->uitx->vu > MAX_SEQUENCE_NUMBER) { llc_data->uitx->vu = 0; llc_data->sapi->oc_ui_tx += (MAX_SEQUENCE_NUMBER+1); } SET_STATE (UITX, UITX_ADM_NOT_READY); if (ll_unitdesc_req->ll_qos.relclass EQ LL_RLC_PROT) { /* * Label S_DATA */ if (ll_unitdesc_req->sapi EQ LL_SAPI_1) { sig_uitx_tx_data_req (ll_unitdesc_req, cipher, GRLC_DTACS_MOBILITY_MANAGEMENT, used_nu, used_oc); } else { sig_uitx_tx_data_req (ll_unitdesc_req, cipher, GRLC_DTACS_DEF, used_nu, used_oc); } } else /* LL_PROT/LL_NO_REL */ { /* * Label S_UNITDATA */ sig_uitx_tx_unitdata_req (ll_unitdesc_req, cipher, used_nu, used_oc); } break; case UITX_TLLI_UNASSIGNED_READY: /* * LLC is not capable of sending data in state TLLI_UNASSIGNED. */ #ifdef LL_DESC llc_cl_desc3_free((T_desc3*)ll_unitdesc_req->desc_list3.first); #endif PFREE (ll_unitdesc_req); SET_STATE (UITX, UITX_TLLI_UNASSIGNED_NOT_READY); break; default: #ifdef LL_DESC llc_cl_desc3_free((T_desc3*)ll_unitdesc_req->desc_list3.first); #endif PFREE (ll_unitdesc_req); TRACE_ERROR( "ll_unitdesc_req unexpected" ); break; } } }/* uitx_ll_unitdesc_req */ /*#endif*/ /* CF_FAST_EXEC || _SIMULATION_ */ /* +------------------------------------------------------------------------------ | Function : uitx_ll_unitdata_req +------------------------------------------------------------------------------ | Description : Handles the primitive LL_UNITDATA_REQ | | Parameters : *ll_unitdata_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ #ifdef LL_DESC #ifndef CF_FAST_EXEC GLOBAL void uitx_ll_unitdata_req (T_LL_UNITDATA_REQ *ll_unitdata_req) { T_desc3 *desc3 = NULL; U16 len, offset; U8 *buf; TRACE_FUNCTION( "uitx_ll_unitdata_req" ); /* * Allocate primitive and fill in the structure elements */ { PALLOC(ll_unitdesc_req, LL_UNITDESC_REQ); ll_unitdesc_req->sapi = ll_unitdata_req->sapi; ll_unitdesc_req->tlli = ll_unitdata_req->tlli; ll_unitdesc_req->ll_qos = ll_unitdata_req->ll_qos; ll_unitdesc_req->cipher = ll_unitdata_req->cipher; ll_unitdesc_req->radio_prio = ll_unitdata_req->radio_prio; ll_unitdesc_req->seg_pos = ll_unitdata_req->seg_pos; ll_unitdesc_req->attached_counter = ll_unitdata_req->attached_counter; #ifdef REL99 ll_unitdesc_req->pkt_flow_id = ll_unitdata_req->pkt_flow_id; #endif /* REL99 */ /* * Allocate memory block for simulating desc2 (desc3->buffer) and set the values of the * desc3-elements. */ len = ll_unitdata_req->sdu.l_buf >> 3; /* BIT to BYTE */ offset = ll_unitdata_req->sdu.o_buf >> 3; /* BIT to BYTE */ desc3 = llc_palloc_desc(len, offset); /* Only one desc3 and buffer is allocated */ buf= (U8*)desc3->buffer; memcpy(&buf[desc3->offset], &ll_unitdata_req->sdu.buf[offset], len); ll_unitdesc_req->desc_list3.first = (U32)desc3; ll_unitdesc_req->desc_list3.list_len = desc3->len; /* * Primitive is handled in uitx_ll_unitdesc_req */ uitx_ll_unitdesc_req (ll_unitdesc_req); } PFREE(ll_unitdata_req); } /* uitx_ll_unitdata_req() */ #endif /* CF_FAST_EXEC */ #endif /* LL_DESC */