view src/g23m-gprs/sndcp/sndcp_pds.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GPRS (8441)
|  Modul   :  sndcp_pds.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This modul is part of the entity SNDCP and implements all 
|             functions to handles the incoming process internal signals as  
|             described in the SDL-documentation (PD-statemachine)
+----------------------------------------------------------------------------- 
*/ 


#define ENTITY_SNDCP

/*==== INCLUDES =============================================================*/

#include "typedefs.h"    /* to get Condat data types */
#include "vsi.h"        /* to get a lot of macros */
#include "macdef.h"
#include "gsm.h"        /* to get a lot of macros */
#include "prim.h"       /* to get the definitions of used SAP and directions */

#include "dti.h"

#include "sndcp.h"        /* to get the global entity definitions */
#include "sndcp_f.h"       /* to get the functions to access the global arrays*/

/*==== CONST ================================================================*/

/*==== LOCAL VARS ===========================================================*/

/*==== PRIVATE FUNCTIONS ====================================================*/

/*==== PUBLIC FUNCTIONS =====================================================*/



/*
+------------------------------------------------------------------------------
| Function    : sig_sd_pd_getunitdata_req
+------------------------------------------------------------------------------
| Description : Handles the internal signal SIG_SD_PD_GETUNITDATA_REQ
|
| Parameters  : the affected sapi.
|
+------------------------------------------------------------------------------
*/
GLOBAL void sig_sd_pd_getunitdata_req (UBYTE sapi) 
{ 
  UBYTE sapi_index = 0;

  TRACE_ISIG( "sig_sd_pd_getunitdata_req" );

   /*
    * set service instance according to sapi in primitive
    */
  sndcp_get_sapi_index(sapi, &sapi_index);
  sndcp_data->pd = & sndcp_data->pd_base[sapi_index];
 
  switch( GET_STATE( PD ) )
  {
    case PD_DEFAULT:
      {
        PALLOC(ll_getunitdata_req, LL_GETUNITDATA_REQ);

        ll_getunitdata_req->sapi = sapi;
        /*
         * TLLI is not evaluated by LLC.
         */
#ifdef FLOW_TRACE
        sndcp_trace_flow_control(FLOW_TRACE_SNDCP, 
                                 FLOW_TRACE_DOWN, 
                                 FLOW_TRACE_BOTTOM, 
                                 TRUE);
#endif
        PSEND(hCommLLC, ll_getunitdata_req);
      }
      break;
    default:
      TRACE_ERROR( "SIG_SD_PD_GETUNITDATA_REQ unexpected" );
      break;
  }
} /* sig_sd_pd_getunitdata_req() */