view src/g23m-gsm/alr2/alr_csf.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 3a14ee9a9843
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  alr_CSF
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the customer specific functions.
+-----------------------------------------------------------------------------
*/

#ifndef ALR_CSF_C
#define ALR_CSF_C

#define ENTITY_PL

/*==== INCLUDES ===================================================*/
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "mconst.cdg"
#include "message.h"
#include "ccdapi.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "cnf_alr.h"
#include "mon_alr.h"
#include "pei.h"
#include "tok.h"

#include "pcm.h"
#ifdef GPRS
#include "alr_gprs.h"
#endif

#ifdef _TMS470
#include "inth/iq.h"
#include "armio/armio.h"
#endif  /* _TMS470 */

#include "alr.h"


/*==== IMPORT =====================================================*/

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (8403)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : csf_show_version           |
+--------------------------------------------------------------------+

  PURPOSE : Trace Layer 1 DSP version numbers

*/

GLOBAL const void csf_show_version (T_TST_TEST_HW_CON  *ver)
{
#if defined (_TMS470)
  USHORT build, hw, jtag, rev;

  /*
   * Retrieve hardware info and build from library
   */
  hw = 0;

  build = IQ_GetBuild();
  jtag  = IQ_GetJtagId();
  rev   = IQ_GetRevision();

  TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev);

  if (ver)
  {
    /*
     * Retrieve Layer 1 info from primitive
     */
    TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X",
                    ver->dsp_code_version,
                    ver->dsp_patch_version,
                    ver->dsp_checksum);
    TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X",
                    ver->mcu_alr_version,
                    ver->mcu_gprs_version,
                    ver->mcu_tm_version);
    PFREE (ver);
  }
#else  /* _TMS470  */
  if (ver)
  {
    PFREE (ver);
  }
#endif  /* _TMS470 */
}

#if !defined NTRACE
/*
 * The following monitor capabilities are used by the Condat RT system.
 * They are only included in the trace version of protocol stack.
/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_idle       |
+--------------------------------------------------------------------+

  PURPOSE : traces the downlink counter values in idle mode if a change
            occur.

*/

UBYTE v_mon_counter_idle = 0;

GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt)
{
  if (v_mon_counter_idle)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND);

    mon_counter_idle->act_dlt = act_dlt;
    mon_counter_idle->max_dlt = max_dlt;

    PSENDX(RR, mon_counter_idle);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_dedi       |
+--------------------------------------------------------------------+

  PURPOSE : traces the radiolink counter values in dedicated mode
            if a change occur.

*/

UBYTE v_mon_counter_dedi = 0;

GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt)
{
  if (v_mon_counter_dedi)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND);

    mon_counter_dedi->act_rlt = act_rlt;
    mon_counter_dedi->max_rlt = max_rlt;

    PSENDX(RR, mon_counter_dedi);
  }
}

#endif /* !NTRACE */

/*
 * Function added in FreeCalypso to support Openmoko's AT@BAND command
 * without making ACI include ALR header files.
 */

GLOBAL void alr_get_band_of_serving_cell (char *strbuf)
{
    switch(alr_data->sc_band)
    {
    case BAND_GSM_900:
      strcpy(strbuf, "GSM 900");
      break;
    case BAND_DCS_1800:
      strcpy(strbuf, "DCS 1800");
      break;
    case BAND_PCS_1900:
      strcpy(strbuf, "PCS 1900");
      break;
    case BAND_E_GSM:
      strcpy(strbuf, "EGSM");
      break;
    case BAND_GSM_850:
      strcpy(strbuf, "GSM 850");
      break;
    default:
      strcpy(strbuf, "Unknown");
    }
}

#endif