FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/alr3/alr_csf.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 3a14ee9a9843 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS | Modul : alr_CSF +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the customer specific functions. +----------------------------------------------------------------------------- */ #ifndef ALR_CSF_C #define ALR_CSF_C #define ENTITY_PL /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include <ctype.h> #include "typedefs.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_alr.h" #include "mon_alr.h" #include "pei.h" #include "tok.h" #include "pcm.h" #ifdef GPRS #include "alr_gprs.h" #endif #ifdef _TMS470 #include "inth/iq.h" #include "armio/armio.h" #endif /* _TMS470 */ #include "alr.h" /*==== IMPORT =====================================================*/ /*==== EXPORT =====================================================*/ /*==== PRIVAT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (8403) MODULE : alr_CSF | | STATE : code ROUTINE : csf_show_version | +--------------------------------------------------------------------+ PURPOSE : Trace Layer 1 DSP version numbers */ GLOBAL void csf_show_version (T_TST_TEST_HW_CON *ver) { #if defined (_TMS470) USHORT build, hw, jtag, rev; /* * Retrieve hardware info and build from library */ hw = 0; build = IQ_GetBuild(); jtag = IQ_GetJtagId(); rev = IQ_GetRevision(); TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev); if (ver) { /* * Retrieve Layer 1 info from primitive */ TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X", ver->dsp_code_version, ver->dsp_patch_version, ver->dsp_checksum); TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X", ver->mcu_alr_version, ver->mcu_gprs_version, ver->mcu_tm_version); PFREE (ver); } #else /* _TMS470 */ if (ver) { PFREE (ver); } #endif /* _TMS470 */ } #if !defined NTRACE /* * The following monitor capabilities are used by the Condat RT system. * They are only included in the trace version of protocol stack. +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_idle | +--------------------------------------------------------------------+ PURPOSE : traces the downlink counter values in idle mode if a change occur. */ UBYTE v_mon_counter_idle = 0; GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt) { if (v_mon_counter_idle) { /* * only if monitoring is enabled */ PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND); mon_counter_idle->act_dlt = act_dlt; mon_counter_idle->max_dlt = max_dlt; PSENDX(RR, mon_counter_idle); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_dedi | +--------------------------------------------------------------------+ PURPOSE : traces the radiolink counter values in dedicated mode if a change occur. */ UBYTE v_mon_counter_dedi = 0; GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt) { if (v_mon_counter_dedi) { /* * only if monitoring is enabled */ PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND); mon_counter_dedi->act_rlt = act_rlt; mon_counter_dedi->max_rlt = max_rlt; PSENDX(RR, mon_counter_dedi); } } #endif /* !NTRACE */ #endif