FreeCalypso > hg > fc-tourmaline
view src/g23m-gsm/cc/cus_cc.h @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CUS_CC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for CC of the | mobile station | | Use this header for definitions to integrate the | protocol stack entity CC in your target system ! +----------------------------------------------------------------------------- */ #ifndef CUS_CC_H #define CUS_CC_H /*==== CONSTANTS ==================================================*/ /* * DTMF_BUF_SIZE * * Description : The constant defines the maximum of * temporary stored DTMF digits -1 in CC. */ #if defined (WIN32) #define DTMF_BUF_SIZE 3 #else #define DTMF_BUF_SIZE 20 #endif /* * MAX_SETUP_ATTEMPTS * * Number of setup attempts until upper layers are informed. * This may be useful for networks which aren't very stable. * All values other than 1 are regarded as dirty trick. */ #ifdef WIN32 // Change this to suit your needs #define MAX_SETUP_ATTEMPTS 2 #else #define MAX_SETUP_ATTEMPTS 1 #endif /* * TIMER_VALUES * * Description : The constants define the timer values * for the CC timers */ /* unit for the timer values is 1 ms */ #define T303_VALUE 30000 #define T305_VALUE 30000 #define T308_VALUE 30000 #define T310_VALUE 30000 #define T313_VALUE 30000 #define T323_VALUE 30000 #define T332_VALUE 30000 #define T335_VALUE 30000 #define T336_VALUE 10000 #define T337_VALUE 10000 /* * MAX_CC_CALLS * * Description : The constant define the number of parallel * cc call instances per subscriber. */ #if defined (WIN32) #define MAX_CC_CALLS 4 #else #define MAX_CC_CALLS 7 #endif /* * MAX_CC_TIMER * * Description : The constant define the number of timer * available in the timer pool. * Note : There are only two timer necessary for each CC instance, * one for the supervision of the CC states and * one for the supervision of DTMF (T336, T337). */ #define MAX_CC_TIMER (MAX_CC_CALLS * 2) /* * FRAME_OFFSET_ZERO * * Description : If the constant is set, PL ensures that all frames * are send with offset zero to DL. This enables a * faster access on frame header parameter. */ #undef FRAME_OFFSET_ZERO /* * MAX_ERROR_TAGS * * Description : The constant define the maximum number of * stored information elements for the * diagnostic field of the cc cause element. */ #define MAX_ERROR_TAGS 5 /* * MAX_STORED_PRIM * * Description : The constant define the maximum number of * stored primiitives in call control. */ #define MAX_STORED_PRIM 4 /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char #define VERSION_CC "CC 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER cc_handle, #define VSI_CALLER_SINGLE cc_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif