view src/gpf/ccd/asn1_bitstr.c @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : asn1_bitstr.c 
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for ASN1_BITSTRING
|             elements 
+----------------------------------------------------------------------------- 
*/ 

/*
 * Standard definitions like UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

#ifndef RUN_INT_RAM
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                |
| STATE   : code                    ROUTINE : cdc_bitstring_decode   |
+--------------------------------------------------------------------+

  PURPOSE : UNALIGNED PER decoding of the bit string type (UMTS)
            The coded bits are preceded by a length indicator, if
            they are not of fixed length. The length indicator is 
            decoded as an ASN1_INTEGER type.
*/

SHORT cdc_bitstring_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  ULONG   repeat;
  U8     *old_pstruct = NULL;

#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
		TRACE_CCD (globs, "cdc_asn1_bitstring_decode()");
	#else
		TRACE_CCD (globs, "cdc_asn1_bitstring_decode() '%s'", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  /* 
   * Set pstrcutOffs and maxRep.
   * Check the valid flag in case of optional elements.
   */
  if (PER_CommonBegin (e_ref, &repeat, globs) NEQ ccdOK)
    return 1;

#ifdef DYNAMIC_ARRAYS
  /*
   * Check for pointer types, and allocate memory if necessary.
   * May overwrite globs->pstruct (and initialize globs->pstructOffs to 0).
   */
  if ( is_pointer_type(e_ref) ) {
    old_pstruct = globs->pstruct;
    if ( PER_allocmem_and_update(e_ref, (USHORT) ((repeat >> 3) +1), globs) NEQ ccdOK)
      /* No memory - Return.  Error already set in function call above. */
      return 1;
  }
#endif

  bf_readBitStr_PER ((USHORT) repeat, globs);

#ifdef DYNAMIC_ARRAYS
  if (old_pstruct NEQ NULL)
    globs->pstruct = old_pstruct;
#endif

  return 1;
}

#endif /* !RUN_INT_RAM */
#ifndef RUN_INT_RAM

/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                |
| STATE   : code                    ROUTINE : cdc_bitstring_encode   |
+--------------------------------------------------------------------+

  PURPOSE : UNALIGNED PER encoding of the bit string type (UMTS)
            The coded bits are preceded by a length indicator, if
            they are not of fixed length. The length indicator is 
            decoded as an ASN1_INTEGER type. 
*/

SHORT cdc_bitstring_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
  ULONG  repeat;
  U8     *old_pstruct = NULL;

#ifdef DEBUG_CCD
	#ifndef CCD_SYMBOLS
		TRACE_CCD (globs, "cdc_asn1_bitstring_encode()");
	#else
		TRACE_CCD (globs, "cdc_asn1_bitstring_encode() '%s'", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  /* 
   * Set pstructOffs and maxRep.
   * Check the valid flag in case of optional elements.
   */
  if (PER_CommonBegin (e_ref, &repeat, globs) NEQ ccdOK)
    return 1;

#ifdef DYNAMIC_ARRAYS
  if ( is_pointer_type(e_ref) ) {
    old_pstruct = globs->pstruct;
    globs->pstruct = *(U8 **)(globs->pstruct + globs->pstructOffs);

    if (ccd_check_pointer(globs->pstruct) == ccdOK)
    {
      globs->pstructOffs = 0;
    }
    else
    {
      ccd_recordFault (globs, ERR_INVALID_PTR, BREAK, (USHORT) e_ref, 
                       &globs->pstruct[globs->pstructOffs]);
      return 1;
    }
  }
#endif

  bf_writeBitStr_PER ((USHORT) repeat, globs);

#ifdef DYNAMIC_ARRAYS 
 if ( old_pstruct NEQ NULL )
    globs->pstruct = old_pstruct;
#endif

  return 1;
}
#endif /* !RUN_INT_RAM */