view src/gpf/frame/route.h @ 287:3dee79757ae4

UI fw: load handheld audio mode on boot We have now reached the point where use of audio mode config files should be considered mandatory. In ACI usage we can tell users that they need to perform an AT@AUL of some appropriate audio mode, but in UI-enabled fw we really need to have the firmware load audio modes on its own, so that correct audio config gets established when the handset or development board runs on its own, without a connected host computer. Once have FC Venus with both main and headset audio channels and headset plug insertion detection, our fw will need to automatically load the handheld mode or the headset mode depending on the plug insertion state. For now we load only the handheld mode, which has been tuned for FC-HDS4 on FC Luna.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Nov 2021 03:20:57 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  File:       route.h
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Type definitions and prototypes for routing.
+----------------------------------------------------------------------------- 
*/ 

#ifndef __ROUTE_H__
#define __ROUTE_H__

#define RT_DUPLICATE    0x01
#define RT_REDIRECT     0x02
#define RT_DESTROY      0x04
#define RT_COMMAND_MASK (RT_DUPLICATE|RT_REDIRECT|RT_DESTROY)

#define RT_CLEAR_ENTRY         0x10
#define RT_ALL_DESTINATION     0x20

typedef enum { RT_STORE = 1, RT_DELETE } RT_ENTRY;
typedef enum { RT_PRIMITIVE_TYPE = 1, RT_SIGNAL_TYPE, RT_TIMEOUT_TYPE } RT_MESSAGE_TYPE;

typedef struct _T_ROUTING_ENTRY
{
  T_HANDLE  SndTaskHandle;    /* sender of a mesage */
  T_HANDLE	OldDestComHandle; /* original destination queue handle */
  T_HANDLE	OldDestTaskHandle;/* original destination task handle */
  T_HANDLE	NewDestComHandle;	/* new destination queue handle */
  RT_MESSAGE_TYPE MsgType;    /* message type (primitive,timeout,signal) */
  ULONG	  opcStatus;			    /* mask for messages to be routed */
  ULONG 	opcMask;			      /* relevant bits in opcStatus */
  int     Command;			      /* redirect/duplicate */
  char ExtDest[RESOURCE_NAMELEN];
  struct _T_ROUTING_ENTRY * pNextEntry;
  struct _T_ROUTING_ENTRY * pPrevEntry;
} T_FRM_ROUTING_TABLE_ENTRY;

#define RT_OK        0
#define RT_ERROR   (-1)
#define RT_NO_MEM  (-2)

#define ROUTE_ALL  (T_HANDLE)0xFFFF

#define RT_CLEAR_TOKEN    "CLEAR"
#define RT_ALL_TOKEN      "ALL"

#define RT_SIGNAL_TOKEN   "S"
#define RT_TIMEOUT_TOKEN  "T"

GLOBAL SHORT rt_Init (void);
GLOBAL SHORT rt_RoutingModify ( T_HANDLE TaskHandle, char *Command, char *String);
GLOBAL SHORT rt_ConnectRoute ( T_HANDLE TaskHandle, char *Destination);
GLOBAL SHORT rt_DisconnectRoute ( T_HANDLE TaskHandle, char *Destination);
GLOBAL SHORT rt_Route ( T_HANDLE SndTaskHandle, T_HANDLE RcvComHandle, USHORT Prio, ULONG Suspend, OS_QDATA *Msg );
GLOBAL SHORT rt_RouteRead ( T_HANDLE TaskHandle, char *token );               
GLOBAL void rt_ExtPrimitive ( T_HANDLE TaskHandle, T_HANDLE DestComHandle, T_HANDLE OrgDestComHandle, char *ExtDest, OS_QDATA *Msg ) ;
GLOBAL SHORT rt_isolate_entity ( T_HANDLE caller, char *entity );
GLOBAL int rt_desclist_to_sdu ( T_HANDLE caller, T_HANDLE dst, T_PRIM_HEADER *prim, T_PRIM_HEADER **sdu_prim );
               

#endif /* ROUTE_H */