FreeCalypso > hg > fc-tourmaline
view src/nucleus/pise.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/*************************************************************************/ /* */ /* Copyright Mentor Graphics Corporation 2002 */ /* All Rights Reserved. */ /* */ /* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS */ /* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS */ /* SUBJECT TO LICENSE TERMS. */ /* */ /*************************************************************************/ /*************************************************************************/ /* */ /* FILE NAME VERSION */ /* */ /* pise.c Nucleus PLUS 1.14 */ /* */ /* COMPONENT */ /* */ /* PI - Pipe Management */ /* */ /* DESCRIPTION */ /* */ /* This file contains error checking routines for supplemental */ /* functions of the Pipe component. This permits easy removal of */ /* error checking logic when it is not needed. */ /* */ /* DATA STRUCTURES */ /* */ /* None */ /* */ /* FUNCTIONS */ /* */ /* PISE_Reset_Pipe Reset a pipe */ /* PISE_Send_To_Front_Of_Pipe Send message to pipe's front */ /* PISE_Broadcast_To_Pipe Broadcast message to pipe */ /* */ /* DEPENDENCIES */ /* */ /* cs_extr.h Common Service functions */ /* tc_extr.h Thread Control functions */ /* pi_extr.h Pipe functions */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1994 Created initial version 1.1 from */ /* routines originally in core */ /* error checking file */ /* */ /* 03-18-1994 Verified version 1.1 */ /* 04-17-1996 updated to version 1.2 */ /* 03-24-1998 Released version 1.3. */ /* 04-17-2002 Released version 1.13m */ /* 11-07-2002 Released version 1.14 */ /*************************************************************************/ #define NU_SOURCE_FILE #include "cs_extr.h" /* Common service functions */ #include "tc_extr.h" /* Thread control functions */ #include "pi_extr.h" /* Pipe functions */ /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PISE_Reset_Pipe */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameter supplied */ /* to the pipe reset function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PIS_Reset_Pipe Actual reset pipe function */ /* */ /* INPUTS */ /* */ /* pipe_ptr Pipe control block pointer */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_PIPE Invalid pipe pointer */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PISE_Reset_Pipe(NU_PIPE *pipe_ptr) { PI_PCB *pipe; STATUS status; /* Move input pipe pointer into internal pointer. */ pipe = (PI_PCB *) pipe_ptr; /* Determine if there is an error with the pipe pointer. */ if (pipe == NU_NULL) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else if (pipe -> pi_id != PI_PIPE_ID) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else /* All the parameters are okay, call the actual function to reset a pipe. */ status = PIS_Reset_Pipe(pipe_ptr); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PISE_Send_To_Front_Of_Pipe */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the send message to front of pipe function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PIS_Send_To_Front_Of_Pipe Actual send to front of pipe */ /* function */ /* TCCE_Suspend_Error Check suspend validity */ /* */ /* INPUTS */ /* */ /* pipe_ptr Pipe control block pointer */ /* message Pointer to message to send */ /* size Size of message to send */ /* suspend Suspension option if full */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_PIPE Invalid pipe pointer */ /* NU_INVALID_POINTER Invalid message pointer */ /* NU_INVALID_SIZE Invalid message size */ /* NU_INVALID_SUSPEND Invalid suspend request */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PISE_Send_To_Front_Of_Pipe(NU_PIPE *pipe_ptr, VOID *message, UNSIGNED size, UNSIGNED suspend) { PI_PCB *pipe; STATUS status; /* Move input pipe pointer into internal pointer. */ pipe = (PI_PCB *) pipe_ptr; /* Determine if there is an error with the pipe pointer. */ if (pipe == NU_NULL) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else if (pipe -> pi_id != PI_PIPE_ID) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else if (message == NU_NULL) /* Indicate that the pointer to the message is invalid. */ status = NU_INVALID_POINTER; else if (size == 0) /* Indicate that the message size is invalid */ status = NU_INVALID_SIZE; else if ((pipe -> pi_fixed_size) && (size != pipe -> pi_message_size)) /* Indicate that the message size is invalid. */ status = NU_INVALID_SIZE; else if ((!pipe -> pi_fixed_size) && (size > pipe -> pi_message_size)) /* Indicate that the message size is invalid. */ status = NU_INVALID_SIZE; else if ((suspend) && (TCCE_Suspend_Error())) /* Indicate that suspension is only valid from a non-task thread. */ status = NU_INVALID_SUSPEND; else /* All the parameters are okay, call the actual function to send a message to a pipe. */ status = PIS_Send_To_Front_Of_Pipe(pipe_ptr, message, size, suspend); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PISE_Broadcast_To_Pipe */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the broadcast message to pipe function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PIS_Broadcast_To_Pipe Actual broadcast message to */ /* pipe function */ /* TCCE_Suspend_Error Check suspend validity */ /* */ /* INPUTS */ /* */ /* pipe_ptr Pipe control block pointer */ /* message Pointer to message to send */ /* size Size of message to send */ /* suspend Suspension option if full */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_PIPE Invalid pipe pointer */ /* NU_INVALID_POINTER Invalid message pointer */ /* NU_INVALID_SIZE Invalid message size */ /* NU_INVALID_SUSPEND Invalid suspend request */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PISE_Broadcast_To_Pipe(NU_PIPE *pipe_ptr, VOID *message, UNSIGNED size, UNSIGNED suspend) { PI_PCB *pipe; STATUS status; /* Move input pipe pointer into internal pointer. */ pipe = (PI_PCB *) pipe_ptr; /* Determine if there is an error with the pipe pointer. */ if (pipe == NU_NULL) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else if (pipe -> pi_id != PI_PIPE_ID) /* Indicate that the pipe pointer is invalid. */ status = NU_INVALID_PIPE; else if (message == NU_NULL) /* Indicate that the pointer to the message is invalid. */ status = NU_INVALID_POINTER; else if (size == 0) /* Indicate that the message size is invalid */ status = NU_INVALID_SIZE; else if ((pipe -> pi_fixed_size) && (size != pipe -> pi_message_size)) /* Indicate that the message size is invalid. */ status = NU_INVALID_SIZE; else if ((!pipe -> pi_fixed_size) && (size > pipe -> pi_message_size)) /* Indicate that the message size is invalid. */ status = NU_INVALID_SIZE; else if ((suspend) && (TCCE_Suspend_Error())) /* Indicate that suspension is only valid from a non-task thread. */ status = NU_INVALID_SUSPEND; else /* All the parameters are okay, call the actual function to broadcast a message to a pipe. */ status = PIS_Broadcast_To_Pipe(pipe_ptr, message, size, suspend); /* Return completion status. */ return(status); }