FreeCalypso > hg > fc-tourmaline
view src/nucleus/pmce.c @ 287:3dee79757ae4
UI fw: load handheld audio mode on boot
We have now reached the point where use of audio mode config files
should be considered mandatory. In ACI usage we can tell users that
they need to perform an AT@AUL of some appropriate audio mode, but
in UI-enabled fw we really need to have the firmware load audio modes
on its own, so that correct audio config gets established when the
handset or development board runs on its own, without a connected host
computer.
Once have FC Venus with both main and headset audio channels and
headset plug insertion detection, our fw will need to automatically
load the handheld mode or the headset mode depending on the plug
insertion state. For now we load only the handheld mode, which has
been tuned for FC-HDS4 on FC Luna.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Nov 2021 03:20:57 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/*************************************************************************/ /* */ /* Copyright Mentor Graphics Corporation 2002 */ /* All Rights Reserved. */ /* */ /* THIS WORK CONTAINS TRADE SECRET AND PROPRIETARY INFORMATION WHICH IS */ /* THE PROPERTY OF MENTOR GRAPHICS CORPORATION OR ITS LICENSORS AND IS */ /* SUBJECT TO LICENSE TERMS. */ /* */ /*************************************************************************/ /*************************************************************************/ /* */ /* FILE NAME VERSION */ /* */ /* pmce.c Nucleus PLUS 1.14 */ /* */ /* COMPONENT */ /* */ /* PM - Partition Memory Management */ /* */ /* DESCRIPTION */ /* */ /* This file contains the error checking routines for the functions */ /* in the Partition component. This permits easy removal of error */ /* checking logic when it is not needed. */ /* */ /* DATA STRUCTURES */ /* */ /* None */ /* */ /* FUNCTIONS */ /* */ /* PMCE_Create_Partition_Pool Create a Partition Pool */ /* PMCE_Delete_Partition_Pool Delete a Partition Pool */ /* PMCE_Allocate_Partition Allocate a partition from a */ /* pool */ /* PMCE_Deallocate_Partition Deallocate a partition from */ /* a pool */ /* */ /* DEPENDENCIES */ /* */ /* cs_extr.h Common Service functions */ /* tc_extr.h Thread Control functions */ /* pm_extr.h Partition functions */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Changed name original error */ /* checking file and changed */ /* function interfaces, resulting */ /* in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* 04-17-1996 updated to version 1.2 */ /* 03-24-1998 Released version 1.3 */ /* 04-17-2002 Released version 1.13m */ /* 11-07-2002 Released version 1.14 */ /*************************************************************************/ #define NU_SOURCE_FILE #include "cs_extr.h" /* Common service functions */ #include "tc_extr.h" /* Thread control functions */ #include "pm_extr.h" /* Partition functions */ /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PMCE_Create_Partition_Pool */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the create partition pool function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PMC_Create_Partition_Pool Actual create partition pool */ /* function */ /* */ /* INPUTS */ /* */ /* pool_ptr Partition pool control block */ /* pointer */ /* name Partition pool name */ /* start_address Starting address of the pool */ /* pool_size Number of bytes in the pool */ /* partition_size Number of bytes in each */ /* partition of the pool */ /* suspend_type Suspension type */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_POOL Pool control block pointer */ /* is NULL */ /* NU_INVALID_MEMORY Pool starting address is NULL*/ /* NU_INVALID_SIZE Partition size is 0 or it is */ /* larger than the pool area */ /* NU_INVALID_SUSPEND Suspension selection is not */ /* valid */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PMCE_Create_Partition_Pool(NU_PARTITION_POOL *pool_ptr, CHAR *name, VOID *start_address, UNSIGNED pool_size, UNSIGNED partition_size, OPTION suspend_type) { PM_PCB *pool; /* Pool control block ptr */ STATUS status; /* Completion status */ UNSIGNED size; /* Adjusted size of partition*/ /* Move input pool pointer into internal pointer. */ pool = (PM_PCB *) pool_ptr; /* Adjust the partition size to something that is evenly divisible by the number of bytes in an UNSIGNED data type. */ size = ((partition_size + sizeof(UNSIGNED) - 1)/sizeof(UNSIGNED)) * sizeof(UNSIGNED); /* Check for a NULL partition pool control block pointer or a control block that is already created. */ if ((pool == NU_NULL) || (pool -> pm_id == PM_PARTITION_ID)) /* Invalid partition pool control block pointer. */ status = NU_INVALID_POOL; else if (start_address == NU_NULL) /* Invalid memory pointer. */ status = NU_INVALID_MEMORY; else if ((size == 0) || ((size + PM_OVERHEAD) > pool_size)) /* Pool could not even accommodate one partition. */ status = NU_INVALID_SIZE; else if ((suspend_type != NU_FIFO) && (suspend_type != NU_PRIORITY)) /* Invalid suspension type. */ status = NU_INVALID_SUSPEND; else /* Call the actual service to create the partition pool. */ status = PMC_Create_Partition_Pool(pool_ptr, name, start_address, pool_size, partition_size, suspend_type); /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PMCE_Delete_Partition_Pool */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the delete partition pool function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PMC_Delete_Partition_Pool Actual function to delete a */ /* partition pool */ /* */ /* INPUTS */ /* */ /* pool_ptr Partition pool control block */ /* pointer */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_POOL Indicates the supplied pool */ /* pointer is invalid */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PMCE_Delete_Partition_Pool(NU_PARTITION_POOL *pool_ptr) { PM_PCB *pool; /* Pool control block ptr */ STATUS status; /* Completion status */ /* Move input pool pointer into internal pointer. */ pool = (PM_PCB *) pool_ptr; /* Determine if the partition pool pointer is valid. */ if ((pool) && (pool -> pm_id == PM_PARTITION_ID)) /* Partition pool pointer is valid, call function to delete it. */ status = PMC_Delete_Partition_Pool(pool_ptr); else /* Partition pool pointer is invalid, indicate in completion status. */ status = NU_INVALID_POOL; /* Return completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PMCE_Allocate_Partition */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the allocate partition function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PMC_Allocate_Partition Actual partition allocate */ /* function */ /* TCCE_Suspend_Error Check for a task suspension */ /* error */ /* */ /* INPUTS */ /* */ /* pool_ptr Memory partition pool pointer*/ /* return_pointer Pointer to the destination */ /* memory pointer */ /* suspend Suspension option if full */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_POOL Indicates the pool pointer */ /* is invalid */ /* NU_INVALID_POINTER Indicates the return pointer */ /* is NULL */ /* NU_INVALID_SUSPEND Indicates the suspension is */ /* invalid */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PMCE_Allocate_Partition(NU_PARTITION_POOL *pool_ptr, VOID **return_pointer, UNSIGNED suspend) { PM_PCB *pool; /* Pool control block ptr */ STATUS status; /* Completion status */ /* Move input pool pointer into internal pointer. */ pool = (PM_PCB *) pool_ptr; /* Determine if partition pool pointer is invalid. */ if (pool == NU_NULL) /* Partition pool pointer is invalid, indicate in completion status. */ status = NU_INVALID_POOL; else if (pool -> pm_id != PM_PARTITION_ID) /* Partition pool pointer is invalid, indicate in completion status. */ status = NU_INVALID_POOL; else if (return_pointer == NU_NULL) /* Return pointer is invalid. */ status = NU_INVALID_POINTER; else if ((suspend) && (TCCE_Suspend_Error())) /* Suspension from a non-task thread. */ status = NU_INVALID_SUSPEND; else /* Parameters are valid, call actual function. */ status = PMC_Allocate_Partition(pool_ptr, return_pointer, suspend); /* Return the completion status. */ return(status); } /*************************************************************************/ /* */ /* FUNCTION */ /* */ /* PMCE_Deallocate_Partition */ /* */ /* DESCRIPTION */ /* */ /* This function performs error checking on the parameters supplied */ /* to the deallocate partition function. */ /* */ /* CALLED BY */ /* */ /* Application */ /* */ /* CALLS */ /* */ /* PMC_Deallocate_Partition Deallocate a partition */ /* */ /* INPUTS */ /* */ /* partition Pointer to partition memory */ /* */ /* OUTPUTS */ /* */ /* NU_INVALID_POINTER Indicates the supplied */ /* partition pointer is NULL, */ /* or otherwise invalid. */ /* NU_SUCCESS */ /* */ /* HISTORY */ /* */ /* DATE REMARKS */ /* */ /* 03-01-1993 Created initial version 1.0 */ /* 04-19-1993 Verified version 1.0 */ /* 03-01-1994 Modified function interface, */ /* resulting in version 1.1 */ /* */ /* 03-18-1994 Verified version 1.1 */ /* */ /*************************************************************************/ STATUS PMCE_Deallocate_Partition(VOID *partition) { PM_PCB *pool; /* Pool pointer */ PM_HEADER *header_ptr; /* Pointer to partition hdr */ STATUS status; /* Completion status */ /* Pickup the associated pool's pointer. It is inside the header of each partition. */ header_ptr = (PM_HEADER *) (((BYTE_PTR) partition) - PM_OVERHEAD); /* Determine if the pointer(s) are NULL. */ if ((header_ptr == NU_NULL) || (partition == NU_NULL)) /* Partition pointer is invalid. */ status = NU_INVALID_POINTER; /* Determine if partition pool pointer is invalid. */ else if ((pool = header_ptr -> pm_partition_pool) == NU_NULL) /* Partition pointer is invalid, indicate in completion status. */ status = NU_INVALID_POINTER; else if (pool -> pm_id != PM_PARTITION_ID) /* Partition pool pointer is invalid, indicate in completion status. */ status = NU_INVALID_POINTER; else if (header_ptr -> pm_next_available) /* Partition is still linked on the available list- must not be allocated. */ status = NU_INVALID_POINTER; else /* Parameters are valid, call actual function. */ status = PMC_Deallocate_Partition(partition); /* Return the completion status. */ return(status); }