FreeCalypso > hg > fc-tourmaline
view cdg-hybrid/cdginc/p_udpa.val @ 301:4bb5772a05a3
AT%SPVER: new command for setting custom speech version lists
The speech version list in the Bearer Capability IE tells the network
which speech codecs are supported by the MS, and in which order of
preference. The standard behaviour is to list all codecs that are
supported by the hw+fw platform, and the standard preference order
is newer over older, FR over HR. But sometimes it is desirable
(for network testing) to artificially restrict which codecs the test MS
will declare as supported, and/or to list them in some peculiar
non-standard order of preference. Add a new private AT command,
AT%SPVER, allowing the user to set and clear custom speech version
lists for the Bearer Capability IE composer in CC.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 21 May 2023 21:43:10 +0000 |
parents | 35f7a1dc9f7d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_udpa.val | | SOURCE : "sap\udpa.pdf" | | LastModified : "2003-08-26" | | IdAndVersion : "8444.103.02.006" | | SrcFileTime : "Thu Nov 29 09:56:38 2007" | | Generated by CCDGEN_2.5.5A on Fri Oct 14 21:41:52 2016 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_UDPA_VAL #define P_UDPA_VAL #define CDG_ENTER__P_UDPA_VAL #define CDG_ENTER__FILENAME _P_UDPA_VAL #define CDG_ENTER__P_UDPA_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_UDPA_VAL__LAST_MODIFIED _2003_08_26 #define CDG_ENTER__P_UDPA_VAL__ID_AND_VERSION _8444_103_02_006 #define CDG_ENTER__P_UDPA_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_38_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_UDPA_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_dti_conn */ #define UDPA_CONNECT_DTI (0x0) /* Connect DTI2 to UDP */ #define UDPA_DISCONNECT_DTI (0x1) /* Disconnect DTI2 from UDP */ /* * Value constants for VAL_link_id */ #define UDPA_LINK_ID_DEFAULT (0x0) /* Default link id */ /* * Value constants for VAL_dti_direction */ #define UDPA_DTI_TO_HIGHER_LAYER (0x0) /* DTI2 used normally */ #define UDPA_DTI_TO_LOWER_LAYER (0x1) /* DTI2 is inverted */ /* * Value constants for VAL_cmd */ #define UDPA_CONFIG_UP (0x0) /* enable the interface */ #define UDPA_CONFIG_DOWN (0x1) /* disable the interface */ /* * user defined constants */ #define UDPA_ENTITY_NAME_LEN (0x6) #include "CDG_LEAVE.h" #endif