FreeCalypso > hg > fc-tourmaline
view src/gpf/tst/drv/mux.c @ 301:4bb5772a05a3
AT%SPVER: new command for setting custom speech version lists
The speech version list in the Bearer Capability IE tells the network
which speech codecs are supported by the MS, and in which order of
preference. The standard behaviour is to list all codecs that are
supported by the hw+fw platform, and the standard preference order
is newer over older, FR over HR. But sometimes it is desirable
(for network testing) to artificially restrict which codecs the test MS
will declare as supported, and/or to list them in some peculiar
non-standard order of preference. Add a new private AT command,
AT%SPVER, allowing the user to set and clear custom speech version
lists for the Bearer Capability IE composer in CC.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 21 May 2023 21:43:10 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: mux.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Module defines the adaptation of the MUX_tr driver | to the GDI. +----------------------------------------------------------------------------- */ #ifdef __MUX_C__ #define __MUX_C__ #endif #include "stdlib.h" #include <stdio.h> #include "string.h" #include "typedefs.h" #include "tools.h" #include "os.h" #include "gdi.h" #include "vsi.h" #include "glob_defs.h" #undef VSI_CALLER #include "frame.h" #include "prim.h" /* to get the definitions of used SAP and directions */ #include "gsm.h" #include "pei.h" #include "route.h" #include "dti.h" /* functionality of the dti library */ #include "mux.h" /* to get the global entity definitions */ #include "frame.h" /*==== TYPES ======================================================*/ /*==== CONSTANTS ==================================================*/ #define VSI_CALLER m_tst_handle, #define VSI_CALLER_SINGLE m_tst_handle #define ALLOWED_MUX_SIGNALS (DRV_SIGTYPE_READ|DRV_SIGTYPE_CONNECT) #define TST_NAME "TST" /*==== EXTERNALS ==================================================*/ extern T_HANDLE ext_data_pool_handle; extern T_QMSG QueueMsg; /*==== GLOBAL VARIABLES ==================================================*/ /*==== LOCAL VARIABLES ==================================================*/ static T_DRV_SIGNAL Signal; T_HANDLE m_tst_handle; /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_Exit | +--------------------------------------------------------------------+ PURPOSE : exit a driver */ void mux_Exit ( void ) { //vsi_p_delete (0, vsi_p_handle (0,"MTST")); mux_data.Connected = FALSE; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_Read | +--------------------------------------------------------------------+ PURPOSE : read data from driver */ USHORT mux_Read ( void *Buffer, ULONG *BytesToRead ) { T_desc2 *d; T_desc2 *d_new; /* copy data into buffer */ *BytesToRead=0; d=mux_data.recv_data; while (d) { d_new=(T_desc2 *)d->next; *BytesToRead += d->len; memcpy(Buffer, d->buffer, d->len); /* free memory */ MFREE(d); d=d_new; } if (mux_data.dti_state NEQ IDLE) /* not yet configured */ { return DRV_NOTCONFIGURED; } else { /* inform UART that we are ready to receive next data package */ dti_start ( mtst_hDTI, MTST_DTI_DN_INSTANCE, MTST_DTI_DN_INTERFACE, MTST_DTI_DN_CHANNEL ); } return DRV_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_Write | +--------------------------------------------------------------------+ PURPOSE : write data to driver */ USHORT mux_Write ( void *Buffer, ULONG *BytesToWrite ) { USHORT ret = DRV_OK; if (mux_data.h_comm_mtst==VSI_ERROR) /* not yet configured */ { ret=DRV_NOTCONFIGURED; } else { T_desc2 *d; T_QMSG *pMsg = &QueueMsg; PALLOC(localPrimPtr, DTI2_DATA_IND); /* fill in parameters */ localPrimPtr->parameters.p_id=DTI_PID_UOS; /* protocol identifier */ /* flow control state */ localPrimPtr->parameters.st_lines.st_flow=DTI_FLOW_ON; /* line state sa */ localPrimPtr->parameters.st_lines.st_line_sa=DTI_SA_ON; /* line state sb */ localPrimPtr->parameters.st_lines.st_line_sb=DTI_SB_ON; /* break length */ localPrimPtr->parameters.st_lines.st_break_len=DTI_BREAK_OFF; /* list of generic data descriptors */ MALLOC(d,(ULONG)(sizeof(T_desc2)+*BytesToWrite-1)); localPrimPtr->desc_list2.first=(ULONG)d; localPrimPtr->desc_list2.list_len= (USHORT)*BytesToWrite; d->next = 0; d->len = (USHORT)*BytesToWrite; d->size = *BytesToWrite; d->offset = 0; memcpy(d->buffer,Buffer,*BytesToWrite); /* PSEND without tracing */ pMsg->Msg.Primitive.Prim = (T_VOID_STRUCT*)(D2P(localPrimPtr)); pMsg->Msg.Primitive.PrimLen = PSIZE(localPrimPtr); pMsg->MsgType = MSG_PRIMITIVE; #ifdef MEMORY_SUPERVISION vsi_c_send (VSI_CALLER mux_data.h_comm_mtst,pMsg,__FILE__,__LINE__); #else vsi_c_send (VSI_CALLER mux_data.h_comm_mtst,pMsg); #endif } return ( ret ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_SetSignal | +--------------------------------------------------------------------+ PURPOSE : enable signal for the driver */ USHORT mux_SetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_MUX_SIGNALS) ) return DRV_INVALID_PARAMS; else mux_data.EnabledSignalType |= SignalType; return DRV_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_ResetSignal | +--------------------------------------------------------------------+ PURPOSE : disable signal for the driver */ USHORT mux_ResetSignal ( USHORT SignalType ) { if ( !(SignalType & ALLOWED_MUX_SIGNALS) ) return DRV_INVALID_PARAMS; else mux_data.EnabledSignalType &= ~SignalType; return DRV_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_SetConfig | +--------------------------------------------------------------------+ PURPOSE : set configuration for the driver PARAMS: Buffer - configuration string ("<DTI-partner> <tui> <c_id>") */ USHORT mux_SetConfig ( char *Buffer ) { char token [10]; char peer_name [10]; USHORT len; ULONG link_id; if ( !mux_data.Connected ) { Signal.SignalType = DRV_SIGTYPE_CONNECT; Signal.DrvHandle = mux_data.Handle; (mux_data.Callback)( &Signal ); mux_data.Connected = TRUE; return DRV_OK; } /* interprete configuration string */ if (!(len = GetNextToken (Buffer, token, " #"))) { return DRV_INVALID_PARAMS; } else { Buffer += (len+1); } if (strcmp(token,"STOP")==0) { dti_close ( mtst_hDTI, MTST_DTI_DN_INSTANCE, MTST_DTI_DN_INTERFACE, MTST_DTI_DN_CHANNEL, FALSE ); mux_data.dti_state=CLOSED; mux_data.h_comm_mtst=VSI_ERROR; /* xxxxx set m_uart_ready = 0 ?! */ if (mux_data.send_data_buf_count>0) { /* xxxxx clear send_buffer ?! */ mux_data.send_data_buf_count=0; } return DRV_OK; } strcpy(peer_name, token); if (!(len = GetNextToken (Buffer, token, " #"))) { return DRV_INVALID_PARAMS; } else { Buffer += (len+1); } link_id=atoi(token); if( dti_open ( mtst_hDTI, MTST_DTI_DN_INSTANCE, MTST_DTI_DN_INTERFACE, MTST_DTI_DN_CHANNEL, DTI_QUEUE_DISABLED, /* DTI_QUEUE_UNLIMITED in order to queue data */ DTI_CHANNEL_TO_LOWER_LAYER, FLOW_CNTRL_ENABLED, DTI_VERSION_10, (U8*)peer_name, link_id ) EQ FALSE) return DRV_INVALID_PARAMS; /* reset send_data_buf counter */ mux_data.send_data_buf_count=0; /* set internal communication handle */ while ( (mux_data.h_comm_mtst=vsi_c_open (0, "MTST")) == VSI_ERROR) { vsi_t_sleep(0,100); }; /* inform UART that we are ready to receive next data package */ { dti_start ( mtst_hDTI, MTST_DTI_DN_INSTANCE, MTST_DTI_DN_INTERFACE, MTST_DTI_DN_CHANNEL ); } return DRV_OK; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-Frame (8415) MODULE : MUX | | STATE : code ROUTINE : mux_Init | +--------------------------------------------------------------------+ PURPOSE : initialize driver */ USHORT mux_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc, T_DRV_EXPORT const **DrvInfo ) { T_HANDLE mux_handle; static const T_DRV_EXPORT mux_Info = { "MUX", CALLED_FROM_ISR, { /*mux_Init,*/ mux_Exit, mux_Read, mux_Write, NULL, NULL, NULL, mux_SetSignal, mux_ResetSignal, mux_SetConfig, NULL, NULL, } }; mux_data.Handle = DrvHandle; mux_data.EnabledSignalType = 0; mux_data.Callback = CallbackFunc; mux_data.Connected = FALSE; mux_data.dti_state = CLOSED; mux_data.h_comm_mtst = VSI_ERROR; mux_handle = vsi_p_create (0, mux_pei_create, NULL, ext_data_pool_handle); if (vsi_p_start (0, mux_handle) != VSI_OK) { return DRV_INITFAILURE; }; *DrvInfo = &mux_Info; m_tst_handle=vsi_c_open (0,TST_NAME); return DRV_OK; }