view src/condat/com/include/vmd.h @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM (6301)
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Types definitions for the voice memo and dialling driver
|             .
+----------------------------------------------------------------------------- 
*/ 

#ifndef DEF_VMD_H
#define DEF_VMD_H

/*
 * Signal Types
 */
#define VMD_END_RECORD             1
#define VMD_END_PLAY               2
#define VMD_SPEECH_RECOGNITION     3


/*
 * type definitions
 */
typedef struct vmd_start_record_type
{
  USHORT * start_address;
  USHORT * stop_address;
  UBYTE    dtx_used;
  USHORT   tone_id;
} vmd_start_record_type;

typedef struct vmd_start_play_type
{
  USHORT * start_address;
} vmd_start_play_type;

typedef struct vmd_end_record_type
{
  USHORT * stop_address;
} vmd_end_record_type;

typedef struct vmd_end_play_type
{
  USHORT * stop_address;
} vmd_end_play_type;


typedef struct vmd_speech_recognition_req_type
{
  USHORT   i_speaker;
  USHORT   i_action;
  USHORT   i_param1;
  USHORT   i_param2;
  USHORT * address;
  USHORT   total_vocabulary_number;
} vmd_speech_recognition_req_type;

/*
 * Constants
 */
#define SC_SR_MAX_NB_USER          10

#define SC_SR_START_ENROLL          1
#define SC_SR_START_UPDATE          2
#define SC_SR_START_RECO            3
#define SC_SR_ABORT                 6
#define SC_SR_START_UPDATE_CHECK   13

#define C_SR_CORRECT_END            0
#define C_SR_CORRECT_END_ACQ        1
#define C_SR_CORRECT_END_UPD        2
#define C_SR_CORRECT_END_RECO       3
#define C_SR_TIME_OUT              11
#define C_SR_BAD_ACQUISITION       12
#define C_SR_OOV_TOOCLOSE          13
#define C_SR_UPDATE_CHECK_ERR      14
#define C_SR_BAD_RECOGNITION       20

#if defined (NEW_FRAME)
/*
 * to achieve backward compatibility with older definitions
 */
#define drv_SignalCB_Type           T_DRV_CB_FUNC
#define drv_SignalID_Type           T_DRV_SIGNAL
#endif

 /*
 * Prototypes
 */
EXTERN UBYTE vmd_init                       (drv_SignalCB_Type   in_SignalCBPtr);
EXTERN void  vmd_exit                       (void);
EXTERN UBYTE vmd_start_voice_memo_recording (vmd_start_record_type * vmd_parameter);
EXTERN UBYTE vmd_stop_voice_memo_recording  (void);
EXTERN UBYTE vmd_start_voice_memo_playing   (vmd_start_play_type   * vmd_parameter);
EXTERN UBYTE vmd_stop_voice_memo_playing  (void);

EXTERN UBYTE vmd_start_recognition          (vmd_speech_recognition_req_type * vmd_parameter);
EXTERN UBYTE vmd_primitive                  (USHORT opc, void * data);

#endif