view src/cs/layer1/tm_cust0/l1tm_tpu10.c @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************* Revision Controle System Header *************
 *                  GSM Layer 1 software
 * L1TM_TPU10.C
 *
 *        Filename l1tm_tpu10.c
 *        Version  1.4
 *        Date     01/10/03
 * 
 ************* Revision Controle System Header *************/

#include "l1_confg.h"
#if (TESTMODE && (RF==10))

#include "tm_defs.h"
#include "l1_const.h"
#include "l1_types.h"
					
#include "l1tm_defty.h"
#include "l1tm_cust.h"
#include "l1tm_tpu10.h"

#if (AUDIO_TASK == 1)
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
#endif
  
#if (L1_GTT == 1)
  #include "l1gtt_const.h"
  #include "l1gtt_defty.h"
#endif

#include "l1_defty.h"
#include "l1_msgty.h"
#include "l1_tabs.h"

#include "l1tm_msgty.h"
#include "l1tm_varex.h"

#if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3))
  #include "spi_drv.h"
#endif   

#include "sys_types.h"
#include "general.h"
#include "l1_time.h"
#include "tpudrv.h"
#include "tpudrv10.h"
#include <string.h>

// Import band configuration from Flash module (need to replace by an access function)


// External function prototypes

void Cust_tm_tpu_table_write        (T_TM_RETURN *tm_return, WORD8 index, UWORD8 size, UWORD8 table[])
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/


    // fill in the cid
    tm_return->cid = TPU_TABLE_WRITE;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

void Cust_tm_tpu_table_read         (T_TM_RETURN *tm_return, WORD8 index)
{
/*
	INDICES BETWEEN in [0..63] RANGE ARE RESERVED FOR TI RF MODULE
*/

    // fill in the cid
    tm_return->cid = TPU_TABLE_READ;

    switch (index)
    {
        default:
          tm_return->size = 0;
          tm_return->status = E_BADINDEX;
          break;
    } // end of switch
}

#endif //TESTMODE