FreeCalypso > hg > fc-tourmaline
view src/cs/layer1/tpu_drivers/source0/tpudrv2.h @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 26 Apr 2021 21:55:13 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/****************** Revision Controle System Header *********************** * GSM Layer 1 software * Copyright (c) Texas Instruments 1998 * * Filename tpudrv2.h * Copyright 2003 (C) Texas Instruments * ****************** Revision Controle System Header ***********************/ /***********************************************************/ /* */ /* Used Timing definitions given in "L1_TIME.H" */ /* -------------------------------------------- */ /* */ /* START_RX_FB STOP_RX_FB */ /* START_RX_SB STOP_RX_SB */ /* START_RX_SNB STOP_RX_SNB */ /* START_RX_NNB STOP_RX_NNB */ /* START_RX_PW_1 STOP_RX_PW_1 */ /* START_RX_FB26 STOP_RX_FB26 */ /* START_TX_NB STOP_TX_NB */ /* START_RX_RA STOP_RX_RA */ /* */ /***********************************************************/ // BB Timings #define VG_CAL_RX_DELAY 65 #define VG_CAL_TX_DELAY 143 #define VG_BDLON_DELAY 70 #define VG_BULOFF_DELAY 35 #define VG_BULON_DELAY 159 #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) #define OM_CAL_RX_DELAY 65 #define OM_CAL_TX_DELAY 230 #define OM_BDLON_DELAY 166 #define OM_BULOFF_DELAY 35 #define OM_BULON_DELAY 250 #define SL_SU_DELAY1 4 #define SL_SU_DELAY2 3 #endif #define RA_TRANSMIS_DURATION ( RA_BURST_DURATION + 46L ) #define NB_TRANSMIS_DURATION ( NB_BURST_DURATION_UL + 29L ) #define START_TX_NB ( 4984L ) // Calibration time is reduced of 4 GSM bit due to a slow APC ramp #define STOP_TX_NB ( START_TX_NB + NB_TRANSMIS_DURATION ) #define STOP_TX_RA ( START_TX_RA + RA_TRANSMIS_DURATION ) #ifdef TPUDRV2_C #if ((ANLG_FAM == 1) || (ANLG_FAM == 2) || (ANLG_FAM == 3)) const unsigned short RF_Sleep[] ={ /*** Immediate ***/ TPU_MOVE(TSP_SPI_SET1, TSP_ENA_POS_MSB), TPU_MOVE(TSP_SPI_SET2, TSP_ENA_POS_MSB | TSP_ENA_POS), 0 }; const unsigned short RF_Wakeup[] ={ /*** Immediate ***/ TPU_MOVE(TSP_SPI_SET1, 0x00), TPU_MOVE(TSP_SPI_SET2, TSP_ENA_POS), 0 }; /*--------------------------------------------------------------------------------------------------------------*/ /* Serial link delay for OMEGA. this delay includes */ /* TSP register programming and serialization of data to OMEGA */ /* */ /* */ /* 4991 4992 4993 4994 4995 4996 4997 */ /* ---------------------------------------------------------------------------------------------- */ /* | | | | | | | */ /*OMEGA | AT(4991) | Clock conf | Nb of bit | Load data | Send write | Serialization */ /* | | | to shift | to shift | command | | */ /* ---------------------------------------------------------------------------------------------- */ /* | | | | | | | */ /* VEGA | | | | | | AT(4996) | TSPACT */ /* | | | | | | | */ /* ------------------------------------------------------------------------------------------|--- */ /* <------------------------------------------------------------------> | */ /* SL_SU_DELAY1 | */ /* V */ /* ACTION ON WINDOW */ /* */ /* When the TSP port is already configured is not necessary to configure the clock and the number of bits */ /* */ /* */ /* 4998 4999 0 1 2 */ /* ------------------------------------------------------------------- */ /* | | | | | | */ /*OMEGA | AT(4998) | Load data | Send write | Serialization | */ /* | | to shift | command | | | */ /* ---------------------------------------------------------------------- */ /* | | | | | | */ /* VEGA | | | | AT(4996) | TSPACT */ /* | | | | | | */ /* ------------------------------------------------------------|------- */ /* <---------------------------------------> | */ /* SL_SU_DELAY2 | */ /* V */ /* ACTION ON WINDOW */ /* */ /* */ /* NOTE : WITH THIS IMPLEMENTATION THE OMEGA SCENARIO ANTICIPATES THE ACTION ON WINDOW SIGNAL OF 347 ns. */ /* ANYWAY ACTION IS TAKEN IN THE SAME QB INTERVAL */ /* */ /* */ /*--------------------------------------------------------------------------------------------------------------*/ /***********************************************************/ /* BASEBAND TPU SCENARIOS FOR OMEGA */ /***********************************************************/ #if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11)) // Samson TPU scenario: add 1 bit to reception window for DMA thres = 2 const SYS_UWORD16 VG_DlNormalBurst [] = { TPU_AT (START_RX_SNB -VG_BDLON_DELAY - SL_SU_DELAY1 ), // AT(4991) // TPU_MOVE (TSP_SPI_SET1, TSP_CLK_RISE), TPU_MOVE (TSP_CTRL1,6), TPU_MOVE (TSP_TX_REG_1,BDLON), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_SNB - VG_CAL_RX_DELAY - SL_SU_DELAY2), // AT(4998) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLCAL), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_SNB - SL_SU_DELAY2), // AT(63) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLENA), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (STOP_RX_SNB - SL_SU_DELAY2), // AT(699) TPU_MOVE (TSP_TX_REG_1,0x00), TPU_MOVE (TSP_CTRL2, TC2_WR), 0 }; // HERCULES TPU scenario const SYS_UWORD16 VG_DlFrequencyBurstIdle [] = { TPU_AT (START_RX_FB - VG_BDLON_DELAY -SL_SU_DELAY1 ), // AT(4991) // TPU_MOVE (TSP_SPI_SET1, TSP_CLK_RISE), TPU_MOVE (TSP_CTRL1,6), TPU_MOVE (TSP_TX_REG_1,BDLON), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_FB - VG_CAL_RX_DELAY -SL_SU_DELAY2), // AT(4998) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLCAL), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_FB - SL_SU_DELAY2), // AT(63) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLENA), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (STOP_RX_FB - SL_SU_DELAY2), // AT(2119) TPU_MOVE (TSP_TX_REG_1,0X00), TPU_MOVE (TSP_CTRL2, TC2_WR), 0 }; #else /* HERCULES TPU scenario */ const SYS_UWORD16 VG_DlNormalBurst [] = { TPU_AT (START_RX_SNB -VG_BDLON_DELAY - SL_SU_DELAY1 ), // AT(4991) // TPU_MOVE (TSP_SPI_SET1, TSP_CLK_RISE), TPU_MOVE (TSP_CTRL1,6), TPU_MOVE (TSP_TX_REG_1,BDLON), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_SNB - VG_CAL_RX_DELAY - SL_SU_DELAY2), // AT(4998) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLCAL), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_SNB - SL_SU_DELAY2), // AT(63) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLENA), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (STOP_RX_SNB - SL_SU_DELAY2), // AT(699) TPU_MOVE (TSP_TX_REG_1,0x00), TPU_MOVE (TSP_CTRL2, TC2_WR), 0 }; // HERCULES TPU scenario const SYS_UWORD16 VG_DlFrequencyBurstIdle [] = { TPU_AT (START_RX_FB - VG_BDLON_DELAY -SL_SU_DELAY1 ), // AT(4991) // TPU_MOVE (TSP_SPI_SET1, TSP_CLK_RISE), TPU_MOVE (TSP_CTRL1,6), TPU_MOVE (TSP_TX_REG_1,BDLON), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_FB - VG_CAL_RX_DELAY -SL_SU_DELAY2), // AT(4998) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLCAL), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (START_RX_FB - SL_SU_DELAY2), // AT(63) TPU_MOVE (TSP_TX_REG_1,BDLON | BDLENA), TPU_MOVE (TSP_CTRL2, TC2_WR), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (0), TPU_AT (STOP_RX_FB - SL_SU_DELAY2), // AT(2119) TPU_MOVE (TSP_TX_REG_1,0X00), TPU_MOVE (TSP_CTRL2, TC2_WR), 0 }; #endif // HERCULES TPU scenario for Omega windows reset const SYS_UWORD16 VG_Omega_win_reset[] = { TPU_MOVE (TSP_SPI_SET1, TSP_CLK_RISE), TPU_MOVE (TSP_CTRL1,6), TPU_MOVE (TSP_TX_REG_1,0x00), TPU_MOVE (TSP_CTRL2, TC2_WR), 0 }; #endif #else extern const SYS_UWORD16 VG_DlNormalBurst[]; extern const SYS_UWORD16 VG_DlFrequencyBurstIdle[]; #endif