view src/cs/services/atp/atp_gsm_gsm_api.h @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
 *
 * File Name : atp_gsm_gsm_api.h
 *
 * Definition used by atp_gsm_gsm_api.c
 *
 * (C) Texas Instruments, all rights reserved
 *
 * Version number	: 0.1      Date : 10-Jully-2000
 *
 * History			: 0.1  - Created by E. Baissus
 *
 *
 * Author           : 
 *
 *   (C) Copyright 2000 by Texas Instruments Incorporated 
 ******************************************************************************/

#ifndef ATP_GSM_GSM_API_H
#define ATP_GSM_GSM_API_H


#include "atp/atp_gsm_bt_api.h"
#include "atp/bti_at.h"

#include "rvm/rvm_api.h"
#define AAA_SWE_FROM_GSM	// define for new parameter to send to GSM PS


/* functions define in GSM side and called by BT side */
void bti_at_init_cnf(T_BTI_ACK ack); 
void bti_at_deinit_ind(void);  
void bti_at_open_port_ind(T_BTI_PORT_NB gsm_port_nb,T_BTI_BT_PORT_INFO bt_custom_info);
void bti_at_close_port_ind(T_BTI_PORT_NB gsm_port_nb);
void bti_at_cmd_ind(T_BTI_PORT_NB gsm_port_nb,char * cmd);
void bti_at_cmd_cnf(T_BTI_PORT_NB gsm_port_nb);
void bti_at_abort_ind(T_BTI_PORT_NB gsm_port_nb);
void bti_data_ready_ind(T_BTI_PORT_NB port_nb,unsigned long nb_of_data);
void bti_get_gsm_data(T_BTI_PORT_NB port_nb,char * buffer, unsigned long nb_of_data);
void bti_data_ready_cnf(T_BTI_PORT_NB port_nb);

/* Custom information between GSM and ATP */
typedef struct
{
	T_ATP_CUSTOM_TYPE custom_type;
	UINT32 optimal_gsm_max_packet_size; /* Indication of what would be the optimal size of packet received by GSM */
										/* 0 Means do not care */
} T_ATP_CUSTOM_FROM_GSM_INFO;


typedef struct
{
	T_ATP_CUSTOM_TYPE custom_type;
	UINT32 bt_max_payload; /* Maximum size of data that can be sent from GSM to Bluetooth (in bytes)*/								
						   /* Should be equal to MFS - overhead due to RFCOMM...*/
#ifdef AAA_SWE_FROM_GSM
	T_RVM_USE_ID rnet_use_id;
#endif
} T_ATP_CUSTOM_TO_GSM_INFO;


#endif