view src/cs/services/atp/atp_spp_api_i.h @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*******************************************************************************
*
* File Name : atp_spp_api_i.h
*
* Internal Definitions for the interface between ATP and SPP SW entity
*
* (C) Texas Instruments, all rights reserved
*
* Version number	: 0.1      Date : 16-Marsh-2000
*
* History			: 0.1  - Created by E. Baissus
*
*
* Author			: Eric Baissus : e-baissus@ti.com
*
*   (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved
******************************************************************************/
#ifndef ATP_SPP_API_I_H
#define ATP_SPP_API_I_H


#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "spp_general.h"
#include "spp_up_interface.h"

// Structure used to store the 'open pending port' information


typedef struct 
{
	T_ATP_SW_ENTITY_ID initiator_id;
	T_ATP_PORT_NB port_nb;
	T_SPP_HANDLE handle;
} T_ATP_SPP_PENDING_PORT_INFO;


typedef enum
{
	ATP_SPP_IS_IND,
	ATP_SPP_IS_CFM
} T_ATP_SPP_IS_IND_OR_CFM;


void atp_spp_to_spp_if_ft(void * message_p);
T_RV_RET atp_spp_open_port_rqst(T_ATP_OPEN_PORT_IND * open_port_ind_p);
T_RV_RET atp_spp_open_port_rsp(void * spp_open_port_rsp_p,T_ATP_SPP_IS_IND_OR_CFM cfm_or_ind);
T_RV_RET atp_spp_port_closed_from_atp(T_ATP_PORT_CLOSED * close_port_p);
T_RV_RET atp_spp_send_to_spp_buffer_nc(T_ATP_NO_COPY_DATA_RDY * atp_no_copy_p);
void atp_spp_from_spp_if_ft(void * message_p);
T_RV_RET atp_spp_reg(void);
T_RV_RET atp_spp_set_atp_signals(T_SPP_LINE_STS * message_p);
T_RV_RET atp_spp_set_spp_signals(T_ATP_SIGNAL_CHANGED * message_p);


#endif