FreeCalypso > hg > fc-tourmaline
view src/cs/services/atp/atp_uart_api.c @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 26 Apr 2021 21:55:13 +0000 |
| parents | 4e78acac3d88 |
| children |
line wrap: on
line source
/********************************************************************************/ /* */ /* File Name: atp_uart_api.c */ /* */ /* Purpose: This file contains the external functions related to */ /* the ATP-UART interface. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved. */ /* */ /********************************************************************************/ #include "atp/atp_uart_i.h" #include "rvm/rvm_use_id_list.h" /********************************************************************************/ /* */ /* Function Name: atp_uart_open_com_port */ /* */ /* Purpose: This function instructs the ATP-UART interface to open */ /* the COM port. */ /* */ /* Input Parameters: */ /* com_port - Contains the COM port number. */ /* baud_rate - Contains the baud rate (in bits per second). */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: None. */ /* */ /* Revision History: */ /* 10/04/01 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_open_com_port (T_ATP_UART_COM_PORT com_port, T_ATP_UART_BAUD_RATE baud_rate) { /* Declare a local variable. */ T_ATP_UART_OPEN_COM_PORT *open_com_port_p = NULL; /******************** atp_uart_open_com_port function begins ********************/ /* Allocate memory required to instruct the ATP-UART interface to open the */ /* COM port. If insufficient resources, then report an internal memory */ /* error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_OPEN_COM_PORT), \ (T_RVF_BUFFER **) (&open_com_port_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Open COM Port' header up. */ (open_com_port_p->os_header).msg_id = ATP_UART_OPEN_COM_PORT; (open_com_port_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (open_com_port_p->os_header).callback_func = NULL; /* Fill the 'ATP-UART Open COM Port' payload up. */ open_com_port_p->com_port = com_port; open_com_port_p->baud_rate = baud_rate; /* Send the 'ATP-UART Open COM Port' notification to the ATP-UART */ /* interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ open_com_port_p)); } /******************* End of atp_uart_open_com_port function *******************/ /********************************************************************************/ /* */ /* Function Name: atp_uart_start_gsm */ /* */ /* Purpose: This function instructs the ATP-UART interface to */ /* initiate using the GSM protocol stack. */ /* */ /* Input Parameters: None. */ /* */ /* Output Parameters: None. */ /* */ /* Global Parameters: None. */ /* */ /* Note: The GSM protocol stack is initialized by invoking the */ /* following AT commands: */ /* AT+CFUN=1 : Set Phone Functionality (Full), */ /* AT+COPS=0 : Operator Selection. */ /* */ /* Revision History: */ /* 09/26/02 Pascal Pompei */ /* - Create. */ /* */ /********************************************************************************/ T_ATP_UART_ERROR_CODES atp_uart_start_gsm (void) { /* Declare a local variable. */ T_ATP_UART_START_GSM *start_gsm_p = NULL; /********************** atp_uart_start_gsm function begins **********************/ /* Allocate memory required to instruct the ATP-UART interface to initiate */ /* using the GSM protocol stack. If insufficient resources, then report an */ /* internal memory error and abort. */ if (rvf_get_buf (gbl_atp_uart_ctrl_blk_p->mb_id, \ sizeof (T_ATP_UART_START_GSM), \ (T_RVF_BUFFER **) (&start_gsm_p)) == RVF_RED) { rvf_send_trace (" ATP-UART (api). Insufficient resources ", 41, NULL_PARAM, RV_TRACE_LEVEL_WARNING, ATP_USE_ID); return (RV_MEMORY_ERR); } /* Fill the 'ATP-UART Start GSM' header up. */ (start_gsm_p->os_header).msg_id = ATP_UART_START_GSM; (start_gsm_p->os_header).src_addr_id = RVF_INVALID_ADDR_ID; (start_gsm_p->os_header).callback_func = NULL; /* Send the 'ATP-UART Start GSM' notification to the ATP-UART interface. */ return (rvf_send_msg (gbl_atp_uart_ctrl_blk_p->addr_id, \ start_gsm_p)); } /********************* End of atp_uart_start_gsm function *********************/