FreeCalypso > hg > fc-tourmaline
view src/cs/services/cst/cst.h @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | 4e78acac3d88 |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT : XXX SOURCE : CST.H | | AUTHOR : XXX VERSION: 1.0 | | CREATED : 01.02.99 STATE : code | +--------------------------------------------------------------------+ MODULE : CST PURPOSE : Definitions for the protocol stack entity CST. */ #ifndef CST_H #define CST_H #include "config/swconfig.cfg" #include "config/chipset.cfg" /*==== TEST =====================================================*/ /* * Dynamic Configuration Numbers */ #define ID_CONFIG 1 #define ID_MUTE 2 #define ID_GSM_PARAMETERS 11 #define ID_L1_PARAMETERS 12 /* * TIMER IDs */ #define T_RX 0 /* request of fieldstrength */ #define TMAX 0 /* must be the last one */ /* * Configuration Parameter */ #define TCST1 0 #define TCST2 1 #if (CHIPSET == 0) #define ARMIO_CLK 0x0001 #define RIF_CLKR 0x0002 #define RIF_CLKX 0x0004 #define RIF_CLK13 0x0010 #define UWIRE_CLK 0x0020 #define SIM_CLK 0x0040 #define TSP_CLK 0x0080 #define UART_CLK 0x0400 #endif #if ((CHIPSET == 2) || (CHIPSET == 3) || (CHIPSET == 4) || \ (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || \ (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || \ (CHIPSET == 11) || (CHIPSET == 12)) #define ARMIO_CLK_CUT 0x0001 #define UWIRE_CLK_CUT 0x0002 #endif // ADC timer expiration value defining the ADC period // with new frame all timer values are in ms not in tdma frames one TDMA approx 4.615 ms #define ADC_PERIOD 4615 #ifdef ALR //#define VM_BUFFER_SIZE 10240 // 10 seconds (1024 words for about 1 second of recording) #endif typedef struct { UBYTE t_mode; ULONG t_val; } T_TIMER_CONFIG; #ifdef OPTION_TIMER #define CST_TSTART(i,h,v) tim_start_timer(i,h,v) #else #define CST_TSTART(i,h,v) vsi_t_start(VSI_CALLER h,v) #endif #define TIMERSTART(i,v,h) csf_alloc_timer(i,v,&h) #define TIMERSTOP(h) csf_free_timer(h); h = VSI_ERROR; /*==== EXPORT =====================================================*/ /* * CST global data declarations */ #define CST_ADC_TIMER 0 /* * Prototypes Timer Modul */ /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ #ifdef OPTION_MULTITHREAD #define tim_init_timer _ENTITY_PREFIXED(tim_init_timer) #define tim_set_timeout_flag _ENTITY_PREFIXED(tim_set_timeout_flag) #define tim_handle_timeout _ENTITY_PREFIXED(tim_handle_timeout) #define tim_config_timer _ENTITY_PREFIXED(tim_config_timer) #define tim_get_config_timer _ENTITY_PREFIXED(tim_get_config_timer) #define tim_start_timer _ENTITY_PREFIXED(tim_start_timer) #define tim_flush_fifo _ENTITY_PREFIXED(tim_flush_fifo) #endif #ifdef OPTION_TIMER /* * If all entities are linked into one module this definitions * prefixes the global data with the entity name */ #ifdef OPTION_MULTITHREAD #define partab _ENTITY_PREFIXED(partab) #endif EXTERN KW_DATA partab[]; #endif /* * If all entities are linked into one module this definitions * prefixes the global data with the enity name */ #ifdef OPTION_MULTITHREAD #define hCommPL _ENTITY_PREFIXED(hCommPL) #define hCommL1 _ENTITY_PREFIXED(hCommL1) #endif EXTERN T_HANDLE hCommPL; /* Communication to TI++ */ EXTERN T_HANDLE hCommL1; /* Communication to Layer 1 */ EXTERN T_HANDLE cst_handle; /* * Prototypes Customer Spefific Functions Modul */ /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ GLOBAL void csf_adc_process (T_CST_ADC_IND *adc_results); EXTERN void adc_start (void); EXTERN void power_down_config (UBYTE sleep_mode, USHORT clocks); GLOBAL void csf_aec_enable (USHORT aec_ctrl_reg); #endif // CST_H