FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aci_bat_mm.c @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #ifdef FF_ATI_BAT #include "typedefs.h" #include "gdd.h" #include "bat.h" #include "aci_bat.h" #endif /* FF_ATI_BAT */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ #undef min #define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; U8 c_oper = cmd->params.ptr_set_plus_cops->c_oper; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; TRACE_FUNCTION ("sBAT_PlusCOPS()"); c_oper = min(c_oper, MAX_ALPHA_OPER_LEN); if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE) memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper); ret =(T_ACI_BAT_RSLT) sAT_PlusCOPS ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_COPS_MOD)cmd->params.ptr_set_plus_cops->mode, (T_ACI_COPS_FRMT)cmd->params.ptr_set_plus_cops->format, op); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; T_ACI_COPS_MOD mode = COPS_MOD_NotPresent; T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent; T_BAT_cmd_response resp; T_BAT_res_que_plus_cops cops; TRACE_FUNCTION ("qBAT_PlusCOPS()"); resp.ctrl_response = BAT_RES_QUE_PLUS_COPS; resp.response.ptr_que_plus_cops = &cops; ret =(T_ACI_BAT_RSLT) qAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, &mode, &format, op); cops.mode = (T_BAT_plus_cops_mode)mode; cops.format = (T_BAT_plus_cops_format)format; cops.c_oper = strlen(op); cops.v_oper = cops.c_oper ? TRUE : FALSE; if (cops.v_oper) { memcpy(cops.oper, op, cops.c_oper); } aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_COPS_LST operLst; T_BAT_cmd_response resp; T_BAT_res_tst_plus_cops *pTPC; SHORT startIdx = 0, lastIdx = 0; BOOL END_OF_LIST = FALSE; TRACE_FUNCTION ("tBAT_PlusCOPS()"); memset(&resp, 0x00, sizeof(T_BAT_cmd_response)); pTPC = resp.response.ptr_tst_plus_cops; resp.ctrl_response = BAT_RES_TST_PERCENT_COPS; do { int i; startIdx += lastIdx; ret =(T_ACI_BAT_RSLT) tAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]); if (ret NEQ ACI_BAT_CMPL) return (ret); for (i = 0; i < lastIdx; i++) { if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0)) { END_OF_LIST = TRUE; break; } /* Fill BAT resp structs */ pTPC->status = (T_BAT_plus_cops_status)operLst[i].status; pTPC->c_short_oper = strlen(operLst[i].shortOper); pTPC->c_long_oper = strlen(operLst[i].longOper); pTPC->c_num_oper = strlen(operLst[i].numOper); /* Check if there is long operator name, set valid flag and store it. */ if(pTPC->c_long_oper) { pTPC->v_long_oper = TRUE; strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper); } /* Check if there is short operator name, set valid flag and store it. */ if(pTPC->c_short_oper) { pTPC->v_short_oper = TRUE; strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper); } /* Check if there is num operator name, set valid flag and store it. */ if(pTPC->c_num_oper) { pTPC->v_num_oper = TRUE; strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper); } aci_bat_send(src_infos_psi, &resp); } return (ACI_BAT_CMPL); } while(!END_OF_LIST); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; U8 c_oper = cmd->params.ptr_set_percent_cops->c_oper; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; TRACE_FUNCTION ("sBAT_PercentCOPS()"); c_oper = min(c_oper, MAX_ALPHA_OPER_LEN); if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE) memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper); ret =(T_ACI_BAT_RSLT) sAT_PercentCOPS ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_COPS_MOD)cmd->params.ptr_set_percent_cops->mode, (T_ACI_COPS_FRMT)cmd->params.ptr_set_percent_cops->format, op); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_COPS_LST operLst; T_BAT_cmd_response resp; T_BAT_res_tst_percent_cops cops; SHORT startIdx = 0, lastIdx = 0; BOOL END_OF_LIST = FALSE; TRACE_FUNCTION ("tBAT_PercentCOPS()"); resp.ctrl_response = BAT_RES_TST_PERCENT_COPS; resp.response.ptr_tst_percent_cops = &cops; do { int i; startIdx += lastIdx; ret =(T_ACI_BAT_RSLT) tAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]); if (ret NEQ ACI_BAT_CMPL) return (ret); for (i = 0; i < lastIdx; i++) { if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0)) { END_OF_LIST = TRUE; break; } /* Fill BAT resp structs */ cops.status = (T_BAT_percent_cops_status)operLst[i].status; cops.c_short_oper = strlen(operLst[i].shortOper); cops.c_long_oper = strlen(operLst[i].longOper); cops.c_num_oper = strlen(operLst[i].numOper); /* Check if there is long operator name, set valid flag and store it. */ if(cops.c_long_oper) { cops.v_long_oper = TRUE; strncpy((CHAR*)cops.long_oper, operLst[i].longOper, cops.c_long_oper); } /* Check if there is short operator name, set valid flag and store it. */ if(cops.c_short_oper) { cops.v_short_oper = TRUE; strncpy((CHAR*)cops.short_oper, operLst[i].shortOper, cops.c_short_oper); } /* Check if there is num operator name, set valid flag and store it. */ if(cops.c_num_oper) { cops.v_num_oper = TRUE; strncpy((CHAR*)cops.num_oper, operLst[i].numOper, cops.c_num_oper); } aci_bat_send(src_infos_psi, &resp); } return (ACI_BAT_CMPL); } while(!END_OF_LIST); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; T_ACI_COPS_MOD mode = COPS_MOD_NotPresent; T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent; T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent; T_BAT_cmd_response resp; T_BAT_res_que_percent_cops cops; TRACE_FUNCTION ("qBAT_PercentCOPS()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS; resp.response.ptr_que_percent_cops = &cops; ret =(T_ACI_BAT_RSLT) qAT_PercentCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, &mode, &format, &svrStatus, op); cops.mode = (T_BAT_percent_cops_mode)mode; cops.format = (T_BAT_percent_cops_format)format; cops.service = (T_BAT_percent_cops_service)svrStatus; cops.c_oper = strlen(op); cops.v_oper = cops.c_oper ? TRUE : FALSE; if (cops.v_oper) { memcpy(cops.oper, op, cops.c_oper); } aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCREG | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_creg creg; TRACE_FUNCTION ("qBAT_PercentCREG()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG; resp.response.ptr_que_percent_creg = &creg; ret =(T_ACI_BAT_RSLT) qAT_PercentCREG((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CREG_STAT*)&creg.stat, (USHORT*)&creg.lac, (USHORT*)&creg.ci, (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind, (U8*)&creg.rt); aci_bat_send(src_infos_psi, &resp); return(ret); } #ifdef TI_PS_FF_AT_CMD_WS46 /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n; TRACE_FUNCTION ("sBAT_PlusWS46()"); ret =(T_ACI_BAT_RSLT) sAT_PlusWS46((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_WS46_MOD)mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_ws46 ws46; TRACE_FUNCTION ("qBAT_PlusWS46()"); resp.ctrl_response = BAT_RES_QUE_PLUS_WS46; resp.response.ptr_que_plus_ws46 = &ws46; ret = (T_ACI_BAT_RSLT) qAT_PlusWS46((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n); aci_bat_send(src_infos_psi, &resp); return(ret); } #endif /* TI_PS_FF_AT_CMD_WS46 */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCHPL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_OPER_NTRY oper; UBYTE len; TRACE_FUNCTION ("sBAT_PercentCHPL()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL((T_ACI_CMD_SRC) src_infos_psi->srcId,&oper); /* * If the command completes, we must send a response. */ if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_set_percent_chpl chpl_data; resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL; resp.response.ptr_set_percent_chpl=&chpl_data; chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS; switch (cmd->params.ptr_set_percent_chpl->oprfrmt) { case BAT_P_CHPL_OPRFRMT_LONG: len=strlen(oper.longName); if (len<=BAT_MAX_CHPL_OPER_LEN) { memcpy(chpl_data.oper,oper.longName,len); chpl_data.c_oper=(U8)len; } else { return(ACI_BAT_FAIL); } break; case BAT_P_CHPL_OPRFRMT_SHORT: len=strlen(oper.shrtName); if (len<=BAT_MAX_CHPL_OPER_LEN) { memcpy(chpl_data.oper,oper.shrtName,len); chpl_data.c_oper=(U8)len; } else { return(ACI_BAT_FAIL); } break; case BAT_P_CHPL_OPRFRMT_NUMERIC: /* * Representation of the numeric format as in the ATI. */ if ((oper.mnc & 0x00F)==0xF) sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4); else sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc); chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper); break; default: return(ACI_BAT_FAIL); } aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PlusCTZU()"); ret =(T_ACI_BAT_RSLT) sAT_PlusCTZU ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CTZU_MODE)cmd->params.ptr_set_plus_ctzu->onoff); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_ctzu ctzu; TRACE_FUNCTION ("qBAT_PlusCTZU()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU; resp.response.ptr_que_plus_ctzu = &ctzu; ret =(T_ACI_BAT_RSLT) qAT_PlusCTZU((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCWUP | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; TRACE_FUNCTION ("sBAT_PercentCWUP()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCWUP ((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CWUP_TYPE)cmd->params.ptr_set_percent_cwup->type); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCTZV | +--------------------------------------------------------------------+ PURPOSE : %CTZV command mode (time and date report) */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentCTZV()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCTZV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : %CNIV set command mode (Network name report) */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCNIV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentCNIV()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCNIV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CNIV_MODE)cmd->params.ptr_set_percent_cniv->mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : %CNIV query command mode */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNIV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_cniv cniv; TRACE_FUNCTION ("qBAT_PercentCNIV()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CNIV; resp.response.ptr_que_percent_cniv = &cniv; ret =(T_ACI_BAT_RSLT) qAT_PercentCNIV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CNIV_MODE*)&cniv.mode); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCIND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PlusCIND()"); ret =(T_ACI_BAT_RSLT) sAT_PlusCIND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CIND_SIGNAL_TYPE)cmd->params.ptr_set_plus_cind->signal_ctrl, (T_ACI_CIND_SMSFULL_TYPE)cmd->params.ptr_set_plus_cind->smsfull_ctrl); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCIND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_cind cind; TRACE_FUNCTION ("qBAT_PlusCIND()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CIND; resp.response.ptr_que_plus_cind = &cind; ret = (T_ACI_BAT_RSLT)qAT_PlusCIND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCMER | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID; T_ACI_CMER_IND_TYPE sCmerIndicationSettings = CMER_INDICATOR_INVALID; T_ACI_CMER_BFR_TYPE sCmerBfrSettings = CMER_BFR_INVALID; TRACE_FUNCTION ("sBAT_PlusCMER()"); switch (cmd->params.ptr_set_plus_cmer->ind_option) { case BAT_CMER_IND_OPTION_LOWER: ret =(T_ACI_BAT_RSLT) sAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, sCmerModeSettings, sCmerIndicationSettings, sCmerBfrSettings); break; case BAT_CMER_IND_OPTION_GREATER_EQUAL: ret = (T_ACI_BAT_RSLT)sAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, sCmerModeSettings, sCmerIndicationSettings, sCmerBfrSettings); break; case BAT_CMER_IND_OPTION_NOT_PRESENT: default: return ACI_BAT_FAIL; } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCMER | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_cmer cmer; T_ACI_CMER_MODE_TYPE sCmerModeSettings; T_ACI_CMER_IND_TYPE sCmerIndicationSettings; T_ACI_CMER_BFR_TYPE sCmerBfrSettings; TRACE_FUNCTION ("qBAT_PlusCMER()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CMER; resp.response.ptr_que_plus_cmer = &cmer; ret =(T_ACI_BAT_RSLT) qAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, &sCmerModeSettings, &sCmerIndicationSettings, &sCmerBfrSettings); switch (cmd->params.ptr_que_plus_cmer->bat_dummy) { default: break; } aci_bat_send(src_infos_psi, &resp); return(ret); }