FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aci_bat_sat.c @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #include "aci_bat.h" /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSATC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATC(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentSATC()"); ret = (T_ACI_BAT_RSLT)sAT_PercentSATC((T_ACI_CMD_SRC)src_infos_psi->srcId, (SHORT)cmd->params.ptr_set_percent_satc->c_satprfl, (UBYTE *)cmd->params.ptr_set_percent_satc->satprfl); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentSATC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentSATC(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_satc satc; TRACE_FUNCTION ("qBAT_PercentSATC()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_SATC; resp.response.ptr_que_percent_satc = &satc; ret =(T_ACI_BAT_RSLT) qAT_PercentSATC((T_ACI_CMD_SRC)src_infos_psi->srcId, (S16*)&satc.c_satprfl, satc.satprfl); aci_bat_send(src_infos_psi, &resp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSATE | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATE(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentSATE()"); ret = (T_ACI_BAT_RSLT)sAT_PercentSATE((T_ACI_CMD_SRC)src_infos_psi->srcId, (SHORT)cmd->params.ptr_set_percent_sate->c_satcmd, (UBYTE *)cmd->params.ptr_set_percent_sate->satcmd); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSATR | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATR(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentSATR()"); ret =(T_ACI_BAT_RSLT) sAT_PercentSATR((T_ACI_CMD_SRC)src_infos_psi->srcId, (SHORT)cmd->params.ptr_set_percent_satr->c_satrsp, (UBYTE *)cmd->params.ptr_set_percent_satr->satrsp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSATT | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATT(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentSATT()"); ret =(T_ACI_BAT_RSLT) sAT_PercentSATT((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_SATT_CS)cmd->params.ptr_set_percent_satt->cs); return (ret); }