FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aoc.h @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : AOC +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions for advice of charge +----------------------------------------------------------------------------- */ #ifndef AOC_H #define AOC_H /* * States of Module */ #define AOC_NULL 0 #define AOC_DISABLE 1 #define AOC_ENABLE 2 /* * Info Causes */ #define AOC_START_TIME 1 #define AOC_STOP_TIME 2 #define AOC_START_AOC 3 #define AOC_SUSPEND_AOC 4 #define AOC_RESUME_AOC 5 #define AOC_CALL_CONNECTED 6 /* * Request Types */ #define AOC_CTV 0 #define AOC_CCM 1 #define AOC_ACM 2 #define AOC_ACMMAX 3 #define AOC_PUCT 4 #define AOC_CCM_PUCT 5 #define AOC_ACM_PUCT 6 #define AOC_ACMMAX_PUCT 7 #define AOC_PUCT_RAW 8 /* * Status of update operation */ #define FIRST_UPDATE 0 #define SECOND_UPDATE 1 #define VERIFY_PWD 2 /* * maximum remaining call time in milliseconds */ #define AOC_MAX_REMAIN_CALL_TIME 30000L #define AOC_THOUSAND_MILLISECONDS 1000L /* * indicates the processing mode for calculating remaining call time */ #define AOC_AOC_TIMER_ELAPSED 0 #define AOC_CALL_TIMER_ELAPSED 1 /* * Structure for requesting PUCT Values */ typedef struct { UBYTE currency [4]; UBYTE value [20]; } T_puct; typedef struct { UBYTE currency [4]; ULONG eppu; ULONG exp; ULONG sexp; } T_puct_raw; /* * e_bitmap parameter */ #define E1_CHANGED 1 #define E2_CHANGED 2 #define E3_CHANGED 4 #define E4_CHANGED 8 #define E7_CHANGED 64 typedef struct { USHORT e1; /* e1 parameter */ USHORT e2; /* e2 parameter */ USHORT e3; /* e3 parameter */ USHORT e4; /* e4 parameter */ /* will be cleared after charged */ USHORT e5; /* e5 parameter */ USHORT e6; /* e6 parameter */ USHORT e7; /* e7 parameter */ /* will be cleared when reached */ UBYTE e_next_bitmap; /* validity of e-parameter */ USHORT e1_next; /* e1 parameter in abeyance*/ USHORT e2_next; /* e2 parameter in abeyance*/ USHORT e3_next; /* e3 parameter in abeyance*/ /* See AOC08226 !!! */ USHORT e7_next; /* e7 parameter in abeyance*/ ULONG first_unit; /* ccm increment first unit*/ ULONG next_unit; /* ccm increment next unit */ T_TIME first_interval; /* time first interval */ T_TIME next_interval; /* time next interval */ T_TIME remaining_time; /* remaining time for timer*/ UBYTE aoc_timer_running;/* timer is running ? */ UBYTE new_data_avail; /* E-Parameter have changed*/ T_TIME time_ut_charge; /* time in sec until next */ /* charging occur */ UBYTE aoci_active; /* indicate charge only */ } T_CC_AOC_TBL; EXTERN UBYTE aoc_init (UBYTE phase, UBYTE *sim_service_table); EXTERN void aoc_reset (void); EXTERN void aoc_sms (void); EXTERN UBYTE aoc_info (SHORT Cid, UBYTE cause); EXTERN void aoc_get_values (UBYTE value_type, void * value); EXTERN T_ACI_RETURN aoc_set_values (T_ACI_CMD_SRC srcId, UBYTE value_type, void * value, UBYTE * password); EXTERN UBYTE aoc_check_moc (void); EXTERN void aoc_parameter (SHORT Cid, T_FWD_CHG_ADVICE_INV * aoc_para); EXTERN void aoc_send_ccm (void); EXTERN UBYTE aoc_ssc (UBYTE nr, UBYTE * serv_table); EXTERN void aoc_read_acm_cb (SHORT table_id); EXTERN void aoc_read_acmmax_cb (SHORT table_id); EXTERN void aoc_read_puct_cb (SHORT table_id); EXTERN void aoc_init_calltable (void); EXTERN UBYTE aoc_timeout (USHORT handle); EXTERN void aoc_timeout_call_timer (void); EXTERN void aoc_timeout_aoc_timer (SHORT Cid); EXTERN UBYTE aoc_non_zero_cai (SHORT Cid); EXTERN UBYTE aoc_check_acm (void); EXTERN void aoc_calculate_charging_parameter (SHORT Cid); EXTERN void aoc_increment_initial_charge (SHORT Cid); EXTERN void aoc_increment_charge (ULONG increment, UBYTE ever); EXTERN void aoc_increment_cb (SHORT table_id); EXTERN void aoc_calculate_puct (ULONG value, T_puct * result); EXTERN void aoc_update_sim_datafield ( UBYTE operation, UBYTE accType, USHORT reqDataFld, void (*rplyCB)(SHORT)); EXTERN void aoc_update_puct (UBYTE operation, T_puct * value); EXTERN void aoc_update_acm_cb (SHORT table_id); EXTERN void aoc_update_acmmax_cb (SHORT table_id); EXTERN void aoc_update_puct_cb (SHORT table_id); EXTERN UBYTE aoc_set_puct_values (T_puct * puct); EXTERN USHORT aoc_getEVal ( void * eBuf ); #endif