view src/g23m-aci/aci/line_split_intern.h @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  
|  Modul   :  line edit
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This modul ...
+-----------------------------------------------------------------------------
*/

#ifndef LINE_SPLIT_INTERN_H
#define LINE_SPLIT_INTERN_H

#define LEDIT_MAX_CMD_NAME_LEN (17)
#define LEDIT_MAX_S_NAME_LEN   (2)

#define SEARCH_BAT_LEN  (0)
#define SEARCH_DIAL_LEN (1)
#define SEARCH_EXT_LEN  (2)

#define BATCMD_NO_SUPP  (0)
#define BATCMD_SUPPORT  (1)
#define BATCMD_DIAL     (2) /* D <---- SPECIAL */
#define BATCMD_S_PARAM  (3) /* S <---- SPECIAL */

#define ANDCMD_NO_SUPP  (0)
#define ANDCMD_SUPPORT  (1)


typedef enum
{
  LEDIT_CHAR_TERMINATED = 0x00,
  LEDIT_CHAR_PERCENT    = 0x25, /* '%' */
  LEDIT_CHAR_AND        = 0x26, /* '&' */
  LEDIT_CHAR_PLUS       = 0x2B, /* '+' */
  LEDIT_CHAR_COMMA      = 0x2C, /* ',' */
  LEDIT_CHAR_NUMBER     = 0x30, /* '0' symbolic for 0..9 */
  LEDIT_CHAR_SEPARATOR  = 0x3B, /* ';' */
  LEDIT_CHAR_SET        = 0x3D, /* '=' */
  LEDIT_CHAR_READ       = 0x3F, /* '?' */
  LEDIT_CHAR_CHAR       = 0x41, /* 'A' symbolic for A..Z*/
  LEDIT_CHAR_EXT         = 0x5B, /*'[' symbolic for the rest of characters*/
  LEDIT_CHAR_INVALID    = 0xFF
} T_LEDIT_CHAR_TYPE;

typedef enum
{
  LEDIT_BASIC_NAME, /* consists of one char only */
  LEDIT_S_NAME,     /* first char must be 'S' and then only digits */
  LEDIT_EXT_NAME    /* multi char name           */
} T_LEDIT_NAME_TYPE;

typedef enum
{
  LEDIT_BASIC_PARAM, /* consists of digits  only */
  LEDIT_DIAL_PARAM,  /* the ending ';' is important to inform about voice or data call */
  LEDIT_EXT_PARAM    /* digits ,, "strings" ;    */
} T_LEDIT_PARAM_TYPE;

EXTERN T_LEDIT_RSLT ledit_split      (T_LEDIT_INTERN *leditInt);
EXTERN void         ledit_free_cmd   (T_LEDIT_INTERN *leditInt);

#endif