view src/g23m-aci/aci/psa_udpas.c @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents fa8dc04885d8
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_UDPAS
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
#if defined (FF_WAP) || defined (FF_SAT_E)

#ifndef PSA_UDPAS_C
#define PSA_UDPAS_C
#endif

#include "aci_all.h"
/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */
#include "dti_conn_mng.h"
#include "dti_cntrl_mng.h"

#include "aci.h"
#include "psa.h"
#include "psa_cc.h"
#include "psa_ss.h"
#include "aoc.h"

#if !defined (MFW)
#include "aci_io.h"
#endif

#include "wap_aci.h"

#include "psa_tcpip.h"
#include "psa_sim.h"
/*==== CONSTANTS ==================================================*/

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_UDPAS                    |
|                            ROUTINE : psaUDPA_Config               |
+-------------------------------------------------------------------+

  PURPOSE : setup UDPA

*/

GLOBAL void psaUDPA_Config ( UBYTE dirc )
{

  switch( dirc )
  {

  case ( UDPA_CONFIG_UP ):
    wap_state = UDPA_Configuration;
    {
      PALLOC(udpa_config_req,UDPA_CONFIG_REQ);
      udpa_config_req->cmd = UDPA_CONFIG_UP;
      PSENDX(UDP,udpa_config_req);
    }
    break;

  case ( UDPA_CONFIG_DOWN ):
    wap_state = UDPA_Deconfiguration;
    {
      PALLOC(udpa_config_req,UDPA_CONFIG_REQ);
      udpa_config_req->cmd = UDPA_CONFIG_DOWN;
      PSENDX(UDP,udpa_config_req);
    }
    break;
  }
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)    MODULE  : PSA_UDPAS                    |
|                            ROUTINE : psaUDPA_Dti_Req              |
+-------------------------------------------------------------------+

  PURPOSE : connect UDP

*/

GLOBAL void psaUDPA_Dti_Req(T_DTI_CONN_LINK_ID dti_id, UBYTE peer_to_connect_to, UBYTE dti_conn)
{

  PALLOC( udpa_dti_req, UDPA_DTI_REQ);


  TRACE_FUNCTION("psaUDPA_Dti_Req");


  udpa_dti_req -> dti_conn  = dti_conn;
  udpa_dti_req -> link_id   = dti_id;

  if (dti_conn EQ UDPA_CONNECT_DTI)
  {

    switch( peer_to_connect_to )
    {
    case( DTI_ENTITY_IP ):
      udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_LOWER_LAYER;
      strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_IP].name);
      break;
    case( DTI_ENTITY_WAP ):
      udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_WAP].name);

      if (dti_cntrl_set_conn_parms(dti_id, DTI_ENTITY_UDP, DTI_INSTANCE_NOTPRESENT, DTI_SUB_NO_NOTPRESENT) EQ FALSE)
      {
        return;
      }

      break;
#ifdef FF_SAT_E      
    case( DTI_ENTITY_SIM ):
      udpa_dti_req -> dti_direction = DTI_CHANNEL_TO_HIGHER_LAYER;
      strcpy((char*)udpa_dti_req->entity_name, dti_entity_name[DTI_ENTITY_SIM].name);
      break;
#endif /* FF_SAT_E */      
    default:
      TRACE_EVENT("unknown conn_peer_Id: UDPA_DTI_REQ not sent");
      PFREE(udpa_dti_req);
      return;
    }
  }

  PSENDX( UDP, udpa_dti_req );

}



#endif /* of FF_WAP or SAT E */