view src/g23m-gsm/alr3/alr_csf.c @ 221:5bf097aeaad7

LLS: when turning off all LEDs on boot, skip LED-C Having LLS turn off LED-A and LED-B on boot is normally unnecessary (they should already be off in Iota), but it is harmless, hence this logic is kept for robustness. However, having LLS read-modify-write the BCICTL2 register (to turn off LED-C) creates a potential race condition with FCHG writes to this register, especially in the case when baseband switch-on is caused by VCHG and charging is expected to start right away. Furthermore, control of the charging LED itself (on those hw targets that have it) is the responsibility of the FCHG SWE, hence LLS should leave it alone.
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 26 Apr 2021 21:55:13 +0000
parents 3a14ee9a9843
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  alr_CSF
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the customer specific functions.
+-----------------------------------------------------------------------------
*/

#ifndef ALR_CSF_C
#define ALR_CSF_C

#define ENTITY_PL

/*==== INCLUDES ===================================================*/
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "mconst.cdg"
#include "message.h"
#include "ccdapi.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "cnf_alr.h"
#include "mon_alr.h"
#include "pei.h"
#include "tok.h"

#include "pcm.h"
#ifdef GPRS
#include "alr_gprs.h"
#endif

#ifdef _TMS470
#include "inth/iq.h"
#include "armio/armio.h"
#endif  /* _TMS470 */

#include "alr.h"


/*==== IMPORT =====================================================*/

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (8403)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : csf_show_version           |
+--------------------------------------------------------------------+

  PURPOSE : Trace Layer 1 DSP version numbers

*/

GLOBAL void csf_show_version (T_TST_TEST_HW_CON  *ver)
{
#if defined (_TMS470)
  USHORT build, hw, jtag, rev;

  /*
   * Retrieve hardware info and build from library
   */
  hw = 0;

  build = IQ_GetBuild();
  jtag  = IQ_GetJtagId();
  rev   = IQ_GetRevision();

  TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev);

  if (ver)
  {
    /*
     * Retrieve Layer 1 info from primitive
     */
    TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X",
                    ver->dsp_code_version,
                    ver->dsp_patch_version,
                    ver->dsp_checksum);
    TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X",
                    ver->mcu_alr_version,
                    ver->mcu_gprs_version,
                    ver->mcu_tm_version);
    PFREE (ver);
  }
#else  /* _TMS470  */
  if (ver)
  {
    PFREE (ver);
  }
#endif  /* _TMS470 */
}

#if !defined NTRACE

/*
 * The following monitor capabilities are used by the Condat RT system.
 * They are only included in the trace version of protocol stack.

+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_idle       |
+--------------------------------------------------------------------+

  PURPOSE : traces the downlink counter values in idle mode if a change
            occur.

*/

UBYTE v_mon_counter_idle = 0;

GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt)
{
  if (v_mon_counter_idle)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND);

    mon_counter_idle->act_dlt = act_dlt;
    mon_counter_idle->max_dlt = max_dlt;

    PSENDX(RR, mon_counter_idle);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_dedi       |
+--------------------------------------------------------------------+

  PURPOSE : traces the radiolink counter values in dedicated mode
            if a change occur.

*/

UBYTE v_mon_counter_dedi = 0;

GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt)
{
  if (v_mon_counter_dedi)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND);

    mon_counter_dedi->act_rlt = act_rlt;
    mon_counter_dedi->max_rlt = max_rlt;

    PSENDX(RR, mon_counter_dedi);
  }
}

#endif /* !NTRACE */

#endif