FreeCalypso > hg > fc-tourmaline
view src/ui/mfw/mfw_band.h @ 221:5bf097aeaad7
LLS: when turning off all LEDs on boot, skip LED-C
Having LLS turn off LED-A and LED-B on boot is normally unnecessary
(they should already be off in Iota), but it is harmless, hence this
logic is kept for robustness. However, having LLS read-modify-write
the BCICTL2 register (to turn off LED-C) creates a potential race
condition with FCHG writes to this register, especially in the case
when baseband switch-on is caused by VCHG and charging is expected
to start right away. Furthermore, control of the charging LED itself
(on those hw targets that have it) is the responsibility of the FCHG
SWE, hence LLS should leave it alone.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 26 Apr 2021 21:55:13 +0000 |
parents | 67bfe9f274f6 |
children |
line wrap: on
line source
#ifndef _MFW_BAND_H_ #define _MFW_BAND_H_ typedef enum { MFW_BAND_Busy= -2, MFW_BAND_Fail = -1, MFW_BAND_OK, MFW_BAND_InProgress } T_MFW_BAND_RET; typedef enum { MFW_BAND_MODE_Auto = 0, MFW_BAND_MODE_Manual = 1 } T_MFW_BAND_MODE; /* SPR919 - SH - Band is now a bit field*/ /*a0393213 compiler warnings removal - typedef removed*/ enum { MFW_BAND_GSM_900 = 1, MFW_BAND_DCS_1800 = 2, MFW_BAND_PCS_1900 = 4, MFW_BAND_E_GSM = 8, MFW_BAND_GSM_850 = 16 }; T_MFW_BAND_RET band_radio_mode_switch(T_MFW_BAND_MODE mode, UBYTE band); T_MFW_BAND_RET band_get_radio_modes(T_MFW_BAND_MODE* maxMode, UBYTE *band); T_MFW_BAND_RET band_get_current_radio_mode(T_MFW_BAND_MODE* mode, UBYTE *band); #endif /* _MFW_BAND_H_*/