FreeCalypso > hg > fc-tourmaline
view doc/Luna-notes @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:32:40 +0000 |
| parents | a62e5bf88434 |
| children |
line wrap: on
line source
FreeCalypso Luna phone handset UI development platform consists of these 3 components: * A Caramel-type Calypso motherboard, either iWOW DSK or FC Caramel2 * An LCD carrier board, currently using HaoRan HT020K1QC36S LCD module * A 5x5 keyswitch matrix board for the keypad function This Luna is our primary official platform for FreeCalypso phone handset UI development. The UI code we got from TI comes in two interesting versions: * Big color version: 176x220 pixels, 16-bit color * Small B&W version: originally 84x48 pixels, we are extending it to 96x64 pix (Originally there was also a third version, large 176x220 pix B&W, but we find it uninteresting and we've removed it from our supported set. It was really nothing more than a hack to display a minimal-effort derivative of the original small B&W UI on the large D-Sample LCD, so we are not removing anything of any real substance here.) FC Luna hardware is required for anyone who wishes to work on the phone handset UI project in FC Tourmaline: it is the only target platform that can display both versions of our work-in-progress UI firmware. Mot C1xx and other similar phones have small LCDs that can only display the small B&W version of our TI-based UI, and in the Mother's opinion working solely on the smallbw version to the exclusion of the bigcolor version is not acceptable.