view src/condat/com/include/pwr.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM (6301)
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Types definitions for the power driver
|             .
+----------------------------------------------------------------------------- 
*/ 

#ifndef PWR_H
#define PWR_H


/*
 * Power signals
 */
#define PWR_SIGTYPE_EXTPOWER 1
#define PWR_SIGTYPE_CHARGER  2
#define PWR_SIGTYPE_BATLEVEL 3

/*
 * Power Status
 */
#define PWR_EXTPOWER_ON      1
#define PWR_CHARGER_ON       2

/*
 * Status Type
 */
typedef struct pwr_Status_Type
{
  UBYTE Status;
  UBYTE BatteryLevel;
  UBYTE ChargeLevel;
} pwr_Status_Type;

/*
 * Driver Control Block
 */
typedef struct pwr_DCB_Type
{
  UBYTE    RangeMin;
  UBYTE    RangeMax;
  UBYTE    Steps;
} pwr_DCB_Type;

#if defined (NEW_FRAME)
/*
 * to achieve backward compatibility with older definitions
 */
#define drv_SignalCB_Type           T_DRV_CB_FUNC
#define drv_SignalID_Type           T_DRV_SIGNAL
#define T_VSI_THANDLE               USHORT
#endif
/*
 * Prototypes
 */
EXTERN UBYTE pwr_Init        (drv_SignalCB_Type   in_SignalCBPtr);
EXTERN void  pwr_Exit        (void);
EXTERN UBYTE pwr_SetSignal   (drv_SignalID_Type * in_SignalIDPtr);
EXTERN UBYTE pwr_ResetSignal (drv_SignalID_Type * in_SignalIDPtr);
EXTERN UBYTE pwr_SetConfig   (pwr_DCB_Type      * in_DCBPtr);
EXTERN UBYTE pwr_GetConfig   (pwr_DCB_Type      * out_DCBPtr);
EXTERN UBYTE pwr_GetStatus   (pwr_Status_Type   * out_StatusPtr);

EXTERN UBYTE pwr_PowerOffMobile   (void);

#endif