enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.

/*
 * Declarations of internal functions live here.
 */

#ifndef __FCHG_FUNC_I
#define __FCHG_FUNC_I

#include "fchg/fchg_messages.h"

void pwr_init_discharge(void);
void pwr_load_ffs_batt_table(void);
void pwr_load_ffs_charging_config(void);
void pwr_check_ffs_bsim(void);
void pwr_set_default_batt_table(void);

void pwr_process_message(T_RV_HDR *msg_ptr);
void pwr_process_adc(struct pwr_adc_ind_s *msg);
void pwr_handle_timer(void);
void pwr_charger_plug_unplug_ind(void);
void pwr_charge_start_req(void);
void pwr_charge_stop_req(void);

#endif	/* include guard */