enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.

/**
 * @file   kpd_handle_timer.c
 *
 * Coding of the kpd_handle_timer function, which is called when a timer
 * of the SWE expires.
 *
 * @author   Laurent Sollier (l-sollier@ti.com)
 * @version 0.1
 */

 /*
 * History:
 *
 *   Date          Author       Modification
 *  ----------------------------------------
 *  10/12/2001     L Sollier    Create
 *
 *
 * (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved
 */


#include "rv/rv_general.h"


/**
 * @name Functions implementation
 *
 */
/*@{*/

/**
 * function: kpd_handle_timer
 */
T_RV_RET kpd_handle_timer(UINT8 timer_num)
{   
   return RV_OK;
}

/*@}*/