view src/cs/drivers/drv_app/spi/spi_process.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 34b7059b9337
children
line wrap: on
line source

/*****************************************************************************/
/*                                                                           */
/*  Name       spi_process.h                                                 */
/*                                                                           */
/*  Function    this file contains the spi_process function prototype,       */
/*		used to handle messages received in the SPI task mailbox.    */
/*                                                                           */
/*  Version    0.1                                                           */
/*                                                                           */
/*  Date       Modification                                                  */
/*  ------------------------------------                                     */
/*                                                                           */
/* Author      Candice Bazanegue                                             */
/*                                                                           */
/* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved */
/*****************************************************************************/

#ifndef __SPI_PROCESS_H__
#define __SPI_PROCESS_H__


#define SPI_ABB_READ_EVT            1
#define SPI_ABB_WRITE_EVT           2
#define SPI_ABB_CONF_ADC_EVT        3
#define SPI_ABB_READ_ADC_EVT        4
#define ABB_EXT_IRQ_EVT             5

/* Prototypes */

/*******************************************************************************
** Function         spi_process
**
** Description     It is called by the spi task core to handle the access to
**                 the ABB through the SPI in a non-preemptive way.
**
*******************************************************************************/
UINT8 spi_process(T_RV_HDR * msg_ptr);

#endif /* __SPI_PROCESS_H__ */