FreeCalypso > hg > fc-tourmaline

view src/cs/riviera/rv/rv_trace.h @ 273:5caa86ee2cfa

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/************************************************************************************* 
 *																			         * 
 *  Name        rv_trace.h													         * 
 *																			         * 
 *  Function    this file contains trace definitions for basic layers		         * 
 *																			         * 
 *  Date        Modification                                                         * 
 *  ------------------------												         * 
 *  10/12/00	 - Create Cristian Livadiotti - c-livadiotti@ti.com			         * 
 *																			         * 
 *																			         * 
 * (C) Copyright 1999 by Texas Instruments Incorporated, All Rights Reserved         * 
 *                                                                                   *
 * --------------------------------------------------------------------------------- *
 *                                                                                   *
 *   History:                                                                        *
 *                                                                                   *
 *   10/18/2001 - Updated for R2D by Christophe Favergeon		                     * 
 *                                                                                   *
 *************************************************************************************/

#ifndef _RV_TRACE_H_
#define _RV_TRACE_H_



/* Define trace levels.                                                          */
#define RV_TRACE_LEVEL_ERROR		(1)		/* Error condition trace messages.   */
											/* Used when an unrecoverable error is found */
#define RV_TRACE_LEVEL_WARNING		(2)		/* Warning condition trace messages. */
											/* Used when an error is found but is handled properly by the code*/
#define RV_TRACE_LEVEL_DEBUG_HIGH	(3)		/* Debug messages (high debugging).  */
                                            /* high = important debug message */
#define RV_TRACE_LEVEL_DEBUG_MEDIUM	(4)		/* Debug messages.                   */
#define RV_TRACE_LEVEL_DEBUG_LOW	(5)		/* Debug messages (low debugging).   */
                                            /* low = not important debug message */

/* temporary definition of this old flag for backward compatibility */
#define TRACE_RVTEST				(0x001E0004)

#endif /* _RV_GENERAL_H_*/