FreeCalypso > hg > fc-tourmaline
view src/cs/riviera/rvm/rvm_ext_priorities.h @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 29 Jul 2021 18:32:40 +0000 |
| parents | 0faa72eaedcb |
| children | 2d7d95e7f9c2 |
line wrap: on
line source
/******************************************************************************* * * * Name rvm_ext_priorities.h * * * * Function this file priorities defintitions for basic SWEs * * It includes a file * * * * Version 0.1 * * * * Date Modification * * ------------------------------------ * * 10/11/2000 Create * * * * Author Cristian Livadiotti (c-livadiotti@ti.com) * * * * (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved * * * * --------------------------------------------------------------------------- * * * * History: * * * * 10/18/2001 - Updated for R2D by Christophe Favergeon * * * ******************************************************************************/ #ifndef __RVM_EXT_PRIORITIES_H_ #define __RVM_EXT_PRIORITIES_H_ /* PRIORITIES SETTING: */ /* All user priority should be set under 250: */ /* Higher values are reserved */ /* ** External Priority definitions ** Note that RVM_EXPL_TASK_PRIORITY is used for testing purpose (refer to RTEST). ** Hence, users have to make sure that such a priority is lower than the software ** entity under test, not to starve the system. */ #define RVM_EXPL_TASK_PRIORITY (242) #define RVM_RGUI_TASK_PRIORITY (240) #define RVM_R2D_TASK_PRIORITY (239) #define RVM_DEV1_TASK_PRIORITY (245) #define RVM_DEV2_TASK_PRIORITY (245) #define RVM_DEV3_TASK_PRIORITY (245) #define RVM_UVM_TASK_PRIORITY (245) #define RVM_BTU_TASK_PRIORITY (248) /* was 240 */ #define RVM_BTUI_TASK_PRIORITY (240) #define RVM_BTA_TASK_PRIORITY (248) /* rl: was 200 */ #define RVM_BTH_TASK_PRIORITY (200) #define RVM_FCBM_TASK_PRIORITY (238) #endif /* __RVM_EXT_PRIORITIES_H_ */