view src/cs/riviera/rvm/rvm_priorities.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents eacfad198b8b
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  Name        rvm_priorities.h                                            */
/*                                                                          */
/*  Function    this file priorities defintitions for basic SWEs	    */
/*		It includes a file rvm_ext_priorities.h where are defined   */
/*		"custom" priorities.					    */
/*                                                                          */
/*  Version	0.1							    */
/*									    */
/*  Date       	Modification						    */
/*  ------------------------------------				    */
/*  10/11/2000	Create							    */
/*									    */
/*  Author	Cristian Livadiotti (c-livadiotti@ti.com)		    */
/*									    */
/* (C) Copyright 2000 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#ifndef __RVM_PRIORITIES_H_
#define __RVM_PRIORITIES_H_


#include "rvm/rvm_ext_priorities.h"

/* PRIORITIES SETTING:                        */
/* All user priority should be set under 250: */
/* Higher values are reserved                 */

/*
** Bluetooth Priorities:
** All set to same value, except ATP (not a task) and HCI (valid on PC only)
*/
#define		RVM_HCI_TASK_PRIORITY			(250)
#define		RVM_L2CAP_TASK_PRIORITY			(240)
#define		RVM_BTCTRL_TASK_PRIORITY		(240)
#define		RVM_RFCOMM_TASK_PRIORITY		(240)
#define		RVM_SPP_TASK_PRIORITY			(240)
#define		RVM_SDP_TASK_PRIORITY			(240)
#define		RVM_HSG_TASK_PRIORITY			(240)
#define		RVM_DUN_GW_TASK_PRIORITY		(240)
#define		RVM_FAX_GW_TASK_PRIORITY		(240)
#define		RVM_ATP_UART_TASK_PRIORITY		(240)
#define		RVM_ATP_TASK_PRIORITY			(255)


/*
** Drivers and Services Priorities
** Note: FFS priority should be lower than every user
*/
#define		RVM_SPI_TASK_PRIORITY			(39)
#define		RVM_FCHG_TASK_PRIORITY			(80)
#define		RVM_TTY_TASK_PRIORITY			(238)
#define		RVM_AUDIO_TASK_PRIORITY			(245)
#define		RVM_AUDIO_BGD_TASK_PRIORITY		(246)
#define		RVM_RTC_TASK_PRIORITY			(248)
#define		RVM_FFS_TASK_PRIORITY			(250)
#define		RVM_TRACE_TASK_PRIORITY			(251) //(79)
#define		RVM_DAR_TASK_PRIORITY			(245)
#define		RVM_ETM_TASK_PRIORITY			(249)
#define		RVM_LCC_TASK_PRIORITY			(246)
#define		RVM_MKS_TASK_PRIORITY			(255)
#define		RVM_KPD_TASK_PRIORITY			(10)

#define		RVM_MPM_TASK_PRIORITY			(242)

#define		RVM_RNET_WS_TASK_PRIORITY		(240)
#define		RVM_RNET_RT_TASK_PRIORITY		(240)
#define		RVM_DCM_TASK_PRIORITY			(240)
#define		RVM_MFW_TASK_PRIORITY			(241)
#define		RVM_MDL_TASK_PRIORITY           	(241)


#define		RVM_OBIGO_TASK_PRIORITY			(242)
#define		RVM_IMG_TASK_PRIORITY			(241)
#define		RVM_MMS_TASK_PRIORITY			(247)

/*
** RV Test Menu and Dummy Tasks Priorities
*/
#define		RVM_RVTEST_MENU_TASK_PRIORITY		(240)
#define		RVM_DUMMY_TASK_PRIORITY			(80)
//#define	IDLE_TASK_PRIORITY			(80)  /* A-M-E-N-D-E-D! */
#define		RVM_INVKR_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE1_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE2_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE3_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE4_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE5_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */
#define		RVM_TE6_TASK_PRIORITY			(240) /* A-M-E-N-D-E-D! */

#define		RVM_TMS_TASK_PRIORITY			(200) /* A-M-E-N-D-E-D! */
#endif /* __RVM_PRIORITIES_H_ */