view src/cs/riviera/tests/rv/rv_test_regr.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/**
 * @file	rv_test_regr.h
 *
 * Definitions used for non-regression tests.
 *
 * @author	Cedric Baudelet
 * @author	Vincent Oberle
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	09/29/00	Cedric Baudelet			Create.
 *	03/15/02	Vincent Oberle			Passed all remaining macros into function.
 *										Comment and formating cleaning.
 *
 * (C) Copyright 2002 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef _RV_TEST_REGR_H_
#define _RV_TEST_REGR_H_

#include "tests/rv/rv_test.h"

#ifdef __cplusplus
extern "C"
{
#endif


/*
 * DO NOT MODIFY THIS FILE!
 * Add your test in the corresponding .c file only.
 */


/**
 * Define the MAX number of tests which it will be possible to execute during
 * the regression.
 */
#define MAX_NB_OF_TEST_TO_PASS (200)

/** Non-Regression test error type */
typedef T_RV_TEST_ERR_TYPE T_RV_REGR_ERR_TYPE;

/** Non-Regression test return value type */
typedef T_RV_TEST_RET T_RV_REGR_RET;


/** Non-Regression test configuration parameter */
typedef enum {
	TEST_LIST					=  0, /* Allows to execute chosen tests				*/
	TEST_LIST_RAND				= -2, /* Allows to execute rand chosen tests		*/ 
	TEST_ALL					= -3, /* Allows to execute all tests available		*/
	TEST_ALL_RAND				= -4  /* Allows to execute rand all tests available	*/
} T_RV_REGR_TEST_CFG;


/** Non-Regression test list contents */
typedef UINT8 T_RV_REGR_TEST_LIST_NBR;
typedef UINT8 T_RV_REGR_TEST_LIST_CFG;

#define CONFIG_A (0) /* DEVICE_A = SOURCE & DEVICE_B = TARGET	*/
#define CONFIG_B (1) /* DEVICE_A = TARGET & DEVICE_B = SOURCE	*/

typedef struct {
    T_RV_REGR_TEST_LIST_NBR	list_nbr;	/* Number of the executed test			*/
	T_RV_REGR_TEST_LIST_CFG	list_cfg;	/* Configuration of the executed test	*/
} T_RV_REGR_TEST_LIST;


/** Non-Regression test total number of tests */
typedef UINT16 T_RV_REGR_TEST_TOT;

/** Non-Regression test nb of occurence of each test */
typedef UINT8 T_RV_REGR_TEST_OCC;

/** Non-Regression test initialization parameter */
#define RV_REGR_RAND_INIT (1)


#ifdef __cplusplus
}
#endif

#endif /* _RV_TEST_REGR_ */