enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.

/**
 * @file	atp_pool_size.h
 *
 * Declarations of:
 * - the memory bank sizes and their watermark
 * - the SWE stack size
 * - the pool size needed (generally the sum of memory bank and stack sizes)
 *
 * @author	Vincent Oberle
 * @version 0.1
 */

/*
 * History:
 *
 *	Date       	Author					Modification
 *	-------------------------------------------------------------------
 *	07/08/2003	Vincent Oberle			Extracted from rvf_pool_size.h
 *
 * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved
 */

#ifndef __ATP_POOL_SIZE_H_
#define __ATP_POOL_SIZE_H_


/*
 * Values used in atp_config.h
 */
#define ATP_MB1_SIZE  (5000)
#define ATP_POOL_SIZE (ATP_MB1_SIZE)


/*
 * Values used in atp_uart_env.h
 */
#define ATP_UART_STACK_SIZE (1024)
#define ATP_UART_MB1_SIZE   (1024)
#define ATP_UART_POOL_SIZE  (ATP_UART_STACK_SIZE + ATP_UART_MB1_SIZE)


#endif /*__ATP_POOL_SIZE_H_*/