view src/cs/services/cst/cus_cst.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT : XXX                        SOURCE : CUS_CST.H            |
| AUTHOR  : XXX                        VERSION: 1.0                  |
| CREATED : 01.02.99                   STATE  : code                 |
+--------------------------------------------------------------------+

   MODULE  : CUS_CST

   PURPOSE : Custom dependent definitions for the CST entity of the
             mobile station.

             Use this header for definitions to integrate the protocol
             stack entity CST in your target system.
*/

#ifndef CUS_CST_H
#define CUS_CST_H


/*==== CONSTANTS ==================================================*/
/*
 * TIMER_VALUES
 *
 * Description :  The constants define the timer values for the CST
 *                timer TXXX depending on the various channel types
 *                and service access point identifiers.
 *
 *                If your target system uses other units please
 *                change the values.
 */

/*
 * Unit is 1 ms 
 */
#define T_RX_VALUE              1000
#define TICS_PER_DECIHOURS      (1000*60*6)


/*
 * MAX_CST_TIMER
 *
 * Description :  The constant define the number of timer available
 *                in the timer pool.
 */
#define MAX_CST_TIMER 4

/*
 * VERSION
 *
 * Description :  The constants define the type and the value of a
 *                version identification. The version is part of the
 *                monitor struct.
 */
#define T_VERSION   char
#define VERSION_CST  "CST 1.0"

/*
 * VSI_CALLER
 *
 * Description :  For multithread applications the constant VSI_CALLER
 *                must be defined to identify the calling thread of the
 *                VSI-Interface. This must be done correponding to the
 *                type of T_VSI_CALLER in VSI.H. The comma symbol is
 *                neccessary because the vsi-functions are called
 *                like this vsi_xxx (VSI_CALLER par2, par3 ...)
 */

#ifdef OPTION_MULTITHREAD
#define VSI_CALLER cst_handle,
#define VSI_CALLER_SINGLE cst_handle
#else
#define VSI_CALLER
#define VSI_CALLER_SINGLE
#endif

#endif // CUS_CST_H