view src/cs/services/dar/dar_api.h @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 4e78acac3d88
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  dar_api.h                                                   */
/*                                                                          */
/*  Purpose:  This file contains data structures and functions prototypes   */
/*            used to send events to the DAR SWE.                           */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date                Modification                                        */
/*  ------------------------------------                                    */
/*  26 September 2001   Create                                              */
/*                                                                          */
/*  Author       Stephanie Gerthoux                                         */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"
#include "rvm/rvm_api.h"

/* file used in recovery case */
#include "main/sys_types.h" 

#include "dar/dar_gen.h"

#ifdef RVM_DAR_SWE

   #ifndef __DAR_API_H_
      #define __DAR_API_H_

      #ifdef __cplusplus
         extern "C"
            {
      #endif

      /***** Events   *****/
      #define DAR_EVENTS_MASK                                  (0x5000)
      #define DAR_EVENT_EXTERN                                 (0x0C00)

      /***** Definitions *****/
      /*Define DAR use parameters */ 
      typedef struct
      { 
         UINT16 group_nb;
         UINT16 mask;
      }T_DAR_USE_ID;

      typedef struct
      {
         T_RV_HDR   os_hdr;
         INT8       status;
      } T_DAR_STATUS;

      /********************************************************************************/
      /*                               RECOVERY                                       */
      /********************************************************************************/

      /***** Events   *****/
      #define DAR_RECOVERY_CONFIG                            (0x0001|DAR_EVENT_EXTERN)
   
      /***** Definitions ******/
      /* Define return parameters. */
      typedef UINT16 T_DAR_RECOVERY_STATUS;
      /* possible values */
      #define DAR_POWER_ON_OFF            (0x0)       /* Power ON/OFF */
      #define DAR_WATCHDOG                (0xDD11)    /* Watchdog reset */
      #define DAR_NORMAL_SCUTTLING        (0xDD22)    /* Recovery module has decided to active the reset */
      #define DAR_EMERGENCY_SCUTTLING     (0xDD33)    /* Emergency detection */

      /* Define Recovery configuration parameters */
      typedef struct{
         UINT16            msg_id;          /* id of the message     */
         T_DAR_BUFFER      buffer_p;        /* pointer on the buffer */
         UINT8             length;          /* buffer length         */
      } T_DAR_RECOVERY_CONFIG;

      /* Define register parameters */
      #define DAR_NAME_MAX_LEN		(15)
      typedef char T_DAR_NAME[DAR_NAME_MAX_LEN];

      /***** Prototype *****/
      /* Get and reset the status of the DAR entity */
      T_RV_RET dar_recovery_get_status(T_DAR_RECOVERY_STATUS* status);
      T_RV_RET dar_recovery_config(T_RV_RET (*dar_store_recovery_data)( T_DAR_BUFFER buffer_p,
                                                                        UINT16 length));
      T_RV_RET dar_get_recovery_data(T_DAR_BUFFER buffer_p,UINT16 length );                                                         

     /********************************************************************************/
     /*                               WATCHDOG                                       */
     /********************************************************************************/
    
     /***** Prototype *****/
     T_RV_RET  dar_start_watchdog_timer(UINT16 timer);
     T_RV_RET  dar_reload_watchdog_timer(void);
     T_RV_RET  dar_stop_watchdog_timer(void);


     /********************************************************************************/
     /*                                RESET                                         */
     /********************************************************************************/
    
     /***** Prototype *****/
     T_RV_RET  dar_reset_system(void);


     /********************************************************************************/
     /*                              DIAGNOSE                                        */
     /********************************************************************************/

     /***** Definitions *****/

     /* DAR level messages value ( Error, Warning or debug )  */
     /*   define with 8 bits: - the first for Error level     */
     /*                       - the second for Warning level  */
     /*                       - the other bits for debug level*/

     /* Error level :    1000 0000 in binary*/
     #define DAR_ERROR                               (0x80)
     /* Warning level :  0100 0000 in binary*/
     #define DAR_WARNING                             (0x40)
     /* Debug level :    0000 0001 in binary*/
     #define DAR_DEBUG                               (0x01)
     /* None level :     0000 0000 in binary*/
     #define DAR_NO_DIAGNOSE                         (0x00)
     /* Exception level  1111 1111 in binary*/
     #define DAR_EXCEPTION                           (0xFF)
     /* Causes a reset, if set when calling dar_diagnose_write_emergency() */
     #define DAR_EMERGENCY_RESET               (0x00000001)
     /* New data is appended to last entry, if set when calling dar_diagnose_write_emergency() */
     #define DAR_NEW_ENTRY                     (0x00000002)

     /***** Prototype *****/
     /* Diagnose prototypes */
     T_RV_RET dar_diagnose_swe_filter (  T_RVM_USE_ID  dar_use_id, 
                                         T_DAR_LEVEL    dar_level);

     T_RV_RET dar_diagnose_write(  T_DAR_INFO    *buffer_p,
                                   T_DAR_FORMAT  format,
                                   T_DAR_LEVEL   diagnose_info_level,
                                   T_RVM_USE_ID  dar_use_id);

     T_RV_RET dar_diagnose_write_emergency(  T_DAR_INFO    *buffer_p,
                                             T_DAR_FORMAT  format,
                                             T_RVM_USE_ID  dar_use_id,
                                             UINT32 flags);

     T_RV_RET dar_diagnose_generate_emergency(  T_DAR_INFO    *buffer_p,
                                                T_DAR_FORMAT  format,
                                                T_RVM_USE_ID  dar_use_id);
  
     #ifdef __cplusplus
       } 
     #endif

   #endif /* __DAR_API_H_ */
#endif /* #ifdef RVM_DAR_SWE */