view src/cs/services/fcbm/fcbm_charging.c @ 273:5caa86ee2cfa

enable L1_NEW_AEC in l1_confg.h (bold change) The AEC function implemented in DSP ROM 3606 on the Calypso silicon we work with is the one that corresponds to L1_NEW_AEC; the same holds for DSP 34 and even for DSP 33 with more recent patch versions. However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0, thus driving AEC the old way if anyone tried to enable it, either via AT%Nxxxx or via the audio mode facility. As a result, the fw would try to control features which no longer exist in the DSP (long vs short echo and the old echo suppression level bits), while providing no way to tune the 8 new parameter words added to the DSP's NDB page. The only sensible solution is to bite the bullet and enable L1_NEW_AEC in L1 config, with fallout propagating into RiViera Audio Service T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format. The latter fallout will be addressed in further code changes.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 29 Jul 2021 18:32:40 +0000
parents 00107c0b8570
children
line wrap: on
line source

/*
 * In this module we are going to implement FCBM functions
 * related specifically to charging mode, as opposed to other
 * special boot modes.
 */

#include "rv/rv_general.h"
#include "rvf/rvf_api.h"
#include "rvm/rvm_use_id_list.h"
#include "fcbm/fcbm_func_i.h"
#include "fcbm/fcbm_life_cycle.h"
#include "fcbm/fcbm_timer_i.h"
#include "fchg/fchg_api.h"
#include "r2d/r2d.h"
#include "r2d/r2d_blrr_api.h"
#include "abb/abb.h"
#include <stdio.h>

#ifdef LSCREEN
char fcbm_prod_banner_string[] = "FreeCalypso Handset";
#else
char fcbm_prod_banner_string[] = "FreeCalypso Lite";
#endif

static char *fchg_states[] = {
	"No charge power",
#ifdef LSCREEN
	"Charger plug debounce",
#else
	"Chg plug debnce",
#endif
	"Ready to charge",
	"Charge complete",
	"I2V cal phase 1",
	"I2V cal phase 2",
	"CI charging",
	"CV charging",
	"Time exceeded",
	"No charging"
};

void fcbm_process_msg_chg_mode(void)
{
	if (fcbm_life_cycle_state != FCBM_STATE_INACTIVE) {
		rvf_send_trace("FCBM got charging mode request in wrong state",
				45, fcbm_life_cycle_state,
				RV_TRACE_LEVEL_ERROR, FCBM_USE_ID);
		return;
	}
	rvf_send_trace("Entering charging boot mode", 27, NULL_PARAM,
			RV_TRACE_LEVEL_DEBUG_HIGH, FCBM_USE_ID);
	fcbm_subscribe_kpd();
	fcbm_setup_long_pwon();
	fcbm_display_init();
	fcbm_display_line(0, fcbm_prod_banner_string);
	fcbm_display_line(1, "Charge boot mode");
	r2d_flush();
	blrr_display_ctrl(BLRR_DISPLAY_CHG_BOOT);
	rvf_start_timer(FCBM_TIMER_DSPL_OFF,
			RVF_SECS_TO_TICKS(FCBM_DISPLAY_SECS), FALSE);
	rvf_start_timer(FCBM_TIMER_CHG_UPD,
			RVF_MS_TO_TICKS(FCBM_CHG_UPD_INTERVAL), TRUE);
	fcbm_life_cycle_state = FCBM_STATE_ACTIVE;
}

static void charging_info_update(void)
{
	struct fchg_user_state state;
	char str[20];

	fchg_get_current_state(&state);
	fcbm_display_line(3, fchg_states[state.chg_state]);
	sprintf(str, "Vbat=%u mV", state.batt_mv);
	fcbm_display_line(5, str);
	sprintf(str, "Ichg=%u mA", fchg_convert_ichg_to_mA(state.ichg));
	fcbm_display_line(6, str);
	sprintf(str, "(%u ADC units)", state.ichg);
	fcbm_display_line(7, str);
	r2d_flush();
}

static void power_off_check(void)
{
	SYS_UWORD16 abb_status;

	abb_status = ABB_Read_Status();
	if (abb_status & CHGPRES)
		return;
	rvf_send_trace("Charger unplug, powering off", 28, NULL_PARAM,
			RV_TRACE_LEVEL_DEBUG_HIGH, FCBM_USE_ID);
	fcbm_display_line(3, "Charger unplug");
	r2d_flush();
	blrr_display_ctrl(BLRR_DISPLAY_CHG_BOOT);
	rvf_delay(RVF_MS_TO_TICKS(1500));
	ABB_Power_Off();
}

void fcbm_chg_periodic_timer(void)
{
	if (fcbm_life_cycle_state != FCBM_STATE_ACTIVE) {
		rvf_send_trace("Charging mode periodic timer in wrong state",
				43, fcbm_life_cycle_state,
				RV_TRACE_LEVEL_WARNING, FCBM_USE_ID);
		return;
	}
	power_off_check();
	charging_info_update();
}