FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aci_bat.h @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This header file consists of the prototype for aci_bat.c | +----------------------------------------------------------------------------- */ #ifndef ACI_BAT_H #define ACI_BAT_H #include "bat_ctrl.h" /* from the bat library to see T_BATC_signal */ #ifndef ACI_BAT_CMH_H #include "aci_bat_cmh.h" #endif #ifdef _SIMULATION_ #define __STR2__(x) #x #define __STR1__(x) __STR2__(x) #define __TODO__ __FILE__ "("__STR1__(__LINE__)") : ToDo : " #else #define __TODO__ #endif #define ACI_BAT_MAX_RESPONSES MAX_PB_ENTR /* for CPBR and similiar multi line response commands */ GLOBAL void aci_bat_send_buffer_dti_data (UBYTE src_id); GLOBAL void aci_bat_check_for_multi_line_response_command(UBYTE src_id); GLOBAL void aci_bat_rcv (T_ACI_DTI_PRC_PSI *src_infos_psi, T_DTI2_DATA_IND *dti_data_ind); GLOBAL void aci_bat_ctrl_rcv (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BATC_signal *signal); GLOBAL void aci_bat_send (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_response *resp); GLOBAL T_ACI_BAT_RSLT aci_bat_wrapper (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd); GLOBAL T_BAT_ctrl_params aci_bat_cur_cmd_get (T_ACI_DTI_PRC_PSI *src_infos_psi); GLOBAL T_BAT_plus_cscs_cs aci_bat_cs_get (T_ACI_DTI_PRC_PSI *src_infos_psi); GLOBAL void aci_bat_cs_set (T_ACI_DTI_PRC_PSI *src_infos_psi,T_BAT_plus_cscs_cs cs); GLOBAL U8 aci_bat_get_l2p_id (U8 src_id); GLOBAL void aci_bat_run_cmd (T_ACI_DTI_PRC_PSI *src_infos_psi); #endif