FreeCalypso > hg > fc-tourmaline
view src/g23m-aci/aci/aci_bat_csc.c @ 273:5caa86ee2cfa
enable L1_NEW_AEC in l1_confg.h (bold change)
The AEC function implemented in DSP ROM 3606 on the Calypso silicon
we work with is the one that corresponds to L1_NEW_AEC; the same holds
for DSP 34 and even for DSP 33 with more recent patch versions.
However, TI shipped their TCS211 reference fw with L1_NEW_AEC set to 0,
thus driving AEC the old way if anyone tried to enable it, either via
AT%Nxxxx or via the audio mode facility. As a result, the fw would
try to control features which no longer exist in the DSP (long vs short
echo and the old echo suppression level bits), while providing no way
to tune the 8 new parameter words added to the DSP's NDB page.
The only sensible solution is to bite the bullet and enable L1_NEW_AEC
in L1 config, with fallout propagating into RiViera Audio Service
T_AUDIO_AEC_CFG structure and into /aud/*.cfg binary file format.
The latter fallout will be addressed in further code changes.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Jul 2021 18:32:40 +0000 |
parents | fa8dc04885d8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_cmd.h" #include "aci_lst.h" #include "ati_int.h" #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #include "aci_bat.h" /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_set_percent_band *band = cmd->params.ptr_set_percent_band; TRACE_FUNCTION ("sBAT_PercentBAND()"); /* Pass the value directly as given by the BAT application */ if (band->band NEQ BAT_P_BAND_BAND_NOT_PRESENT) { ret = (T_ACI_BAT_RSLT)sAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_BAND_MODE)band->mode, (U8)band->band); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { TRACE_FUNCTION ("tBAT_PercentBAND()"); return (ACI_BAT_FAIL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentBAND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_band band; TRACE_FUNCTION ("qBAT_PercentBAND()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_BAND; resp.response.ptr_que_percent_band = &band; /* Band initial value should be assigned to 0 */ resp.response.ptr_que_percent_band->band = BAT_P_BAND_BAND_NOT_PRESENT; ret = (T_ACI_BAT_RSLT)qAT_PercentBAND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_BAND_MODE*)&band.mode, (U8*)&band.band); aci_bat_send(src_infos_psi, &resp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCPI | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCPI(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; /* T_BAT_res_que_percent_cpi cpi; */ TRACE_FUNCTION ("qBAT_PercentCPI()"); /* resp.ctrl_response = BAT_RES_QUE_PERCENT_CPI; */ /* hmm, do not know which ACI function to call ! */ aci_bat_send(src_infos_psi, &resp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCNAP | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNAP(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_cnap cnap; TRACE_FUNCTION ("qBAT_PercentCNAP()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CNAP; resp.response.ptr_que_percent_cnap = &cnap; ret = (T_ACI_BAT_RSLT)qAT_PercentCNAP((T_ACI_CMD_SRC)src_infos_psi->srcId); aci_bat_send(src_infos_psi, &resp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentALS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_ACI_ALS_MOD ALSmode; TRACE_FUNCTION ("sBAT_PercentALS()"); #ifndef _SIMULATION_ /* mapping for SAP BAT %ALS values according to 8415.052.doc */ switch( cmd->params.ptr_set_percent_als->mode ) { case BAT_P_ALS_MOD_SPEECH: ALSmode = ALS_MOD_SPEECH; break; case BAT_P_ALS_MOD_AUX_SPEECH: ALSmode = ALS_MOD_AUX_SPEECH; break; default: cmdCmeError(CME_ERR_OpNotSupp); return (ACI_BAT_FAIL); } #else /* if SIMULATION */ ALSmode = cmd->params.ptr_set_percent_als->mode; #endif /* SIMULATION */ ret = (T_ACI_BAT_RSLT)sAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId, ALSmode); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PercentALS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PercentALS (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { TRACE_FUNCTION ("tBAT_PercentALS()"); return (ACI_BAT_FAIL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentALS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentALS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_als als; T_ACI_ALS_MOD als_aci_mode; TRACE_FUNCTION ("qBAT_PercentALS()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_ALS; resp.response.ptr_que_percent_als = &als; ret = (T_ACI_BAT_RSLT)qAT_PercentALS((T_ACI_CMD_SRC)src_infos_psi->srcId,&als_aci_mode); switch(als_aci_mode) { case ALS_MOD_SPEECH: als.mode = BAT_P_ALS_MOD_SPEECH; break; case ALS_MOD_AUX_SPEECH: als.mode = BAT_P_ALS_MOD_AUX_SPEECH; break; default: cmdCmeError(CME_ERR_OpNotSupp); return (ACI_BAT_FAIL); } aci_bat_send(src_infos_psi, &resp); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentPPP | +--------------------------------------------------------------------+ PURPOSE : */ #if defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E) GLOBAL T_ACI_BAT_RSLT sBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentPPP()"); ret = (T_ACI_BAT_RSLT)sAT_PercentPPP((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_PPP_PROT)cmd->params.ptr_set_percent_ppp->authprot, (CHAR *)cmd->params.ptr_set_percent_ppp->user, (CHAR *)cmd->params.ptr_set_percent_ppp->password, (T_ACI_PPP_CON)cmd->params.ptr_set_percent_ppp->conn_type); return (ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentPPP | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentPPP(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_cmd_response resp; T_BAT_res_que_percent_ppp ppp; TRACE_FUNCTION ("qBAT_PercentPPP()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_PPP; resp.response.ptr_que_percent_ppp = &ppp; ret = (T_ACI_BAT_RSLT) qAT_PercentPPP(src_infos_psi->srcId, (ULONG*)&ppp.ipaddr, (ULONG*)&ppp.dns1,(ULONG*)&ppp.dns2); aci_bat_send(src_infos_psi, &resp); return (ret); } #endif /* defined(FF_WAP) || defined(FF_PPP) || defined(FF_SAT_E) */